My games installed does not start!

Similar Questions

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• Inspiron 620-7750 Radeon with 450W power supply installed does not start

  Hello!

  I have looked EVERYWHERE online and on the forum and have seen several posts on this topic and still not found a solution that works.  I have a Dell Inspiron 620

  • I5Intel Processor2nd Gen Core i5-2310 / 2.9 GHz
  • Memory8 GB / 8 GB (max)
  • Windows 7 Home Premium 64 - bit Edition operating mode
  • Optical DriveDVD±RW
  • Graphics technology ProcesseurIntel HD Graphics 2000 dynamic video memory 5.0
  • Integrated graphics controller

  Recently, I buy a Powercolor Radeon 7750 graphics card I have installed the drivers, uninstalled the current Intel Graphics driver from Device Manager and then install the new card.  I of course unplugged the PSU got rid of and left in power has failed to myself and plugged into the PCI-E.  After I tired to turn on but it does not start.  Fans begin to turn, including on the graphics card, but nothing comes up on the monitor and it won't start.  When I unplugged the 7750 card it starts very well?

  At first I thought that it was not powered ridiculously horrible 300w PSU they put so that I have upgraded to an a 450w.  Everything works with the new power supply installed without the card, but as soon as I plug the new map, he continues to not start as before installing the card.  I have searched and tried things for 2 days now and CAN NOT find a solution.  I know that the 620 does not access the menu of the BIOS under settings in advance who does not help (don't know why Dell would never think it was a good idea!) so I can't change anything in there.

  Please, any help would be fantastic!

  Thanks in advance!

  The card is a bad card.  There should be ZERO problems with the supply of the stock 305 w and a 7750.

• TE2300 XP install does not start?

  Hello world

  I'm trying to reinstall XP on a TE2300 (PT230A-00297) for a friend and met problems to make the installation of Win XP to start disc.

  I put a new HARD drive in there and the BIOS boot sequence is set correctly, but the system does not always start from the DVD drive, it seems to ignore that and moves directly to the LAN boot that is next on the list, to be on the HARD drive which is of course not formatted at this stage.

  I have an older HARD drive which is on the point of death, who already has XP on it and when it is installed in the machine everything works well and allowed me to confirm that the DVD player works correctly.

  Ideas, why the system does not boot to the CD/DVD?

  Any ideas how I can start an installation if I can't boot from the CD/DVD?

  Thank you kindly!
  Geoff

  It will be interesting to have more info on this new HARD drive.
  When you start your laptop try press the C key. This will force the optical disc drive to start as first boot device.

• Game program does not start

  I'm trying to throw the game dungeons and dragons online with a pc OS win 7, 64 bit.
  However I have try all the compatibility mode, with or whitout rights administrator, when I click on the button of the exe, the only thing I see is the small window: u run this program and after that nothing happens. Anyone has any idea what els I can try, deletes I get no warning of the error message, nothing at all, it don't work. I know that its possible to run the game on this os, other system can do.
  Must be something on my pc that I suppose, but I have no idea what it can be.

  Kwispel,
  DDO does not appear on the Windows 7 Compatibility Center , but that does not mean it will not work.  You must verify that all your hardware drivers are up to date (including video and audio).  Once your drivers are up to date, and then test the game.  If that fails, uninstall the game.  When you go to re - install, run the installer in compatibility mode.  If you still have a problem, then you should contact DDO and see if they have any necessary patches for Windows 7.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 10 Windows install does not start

  I went to upgrade to Windows 10, when the downloaded GWX-pse_ggl, I went to run it, and nothing happens. It does not say anything comes this window "Are you sure you want to run this program?", I say yes, and... Nothing. I did not dig a lot, and Yes, I tried as admin. I don't have the patience to solve Windows problems, not to mention the problems with Windows Windows.

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Download a trial of Photoshop Elements Mac - download/install does not start

  I tried to download Adobe PhotoShop elements 11 trial on my iMac 27 (osx Mountain Lion). All was well with the requirement of "Download Assistant", but the installation of effective enforcement is not started.

  Are there problems with the operating system? This program looks amazing, but, as a recent PC fugitive, I would try it.

  Suggestions please.

  Try to download PES 11 using the Direct download link and install.

  l http://prodesigntools.com/Photoshop-Elements-11-Direct-Download-Links-PSE-Premiere-pre.htm

• Reports of Oracle 11 g Universal install does not start

  Hello

  I try to install reports Oracle 11 g R2 (11.1.2.0.0) on a Win 7 64 bit desktop. I followed all the instructions for the installation begins with the installation of java jdk 7_45. The WLS server has been installed without any problem also (WLS1036_generic.jar for 64-bit). When I go in the folder of disk 1 of Oracle reports install files and click on Setup.exe, a command window opens with the following message:

  Claiming Universal Oracle install...

  Check the swap space: must be greater than 500 MB. Real 4962 MB passed

  Monitor: must be configured to display at least 256 colors greater than 256. 4294967296 real past

  Preparations for the launch of Oracle Universal Installer from C:\Windows\Temp\OraInstall112013-11-15_08-29-42AM. Please wait...

  The command window gets stuck here and no installation window is launched. Others followed the same process, but had an installation window open. Everyone knows about this issue or to know what measures to take in order to remedy?

  Thank you!

  Oracle Forms and reports 11.1.2.0.0 is not supported with Java JDK 7 according to the matrix certification Oracle Support: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls

  It's specific to a reason why you use version 11.1.2.0.0 more precisely? If you're looking for the latest version of reports and forms Oracle 11 GR 2 (if you are working with forms, reports, or both), exists in version 11.1.2.1.0, which is the latest version available and contains the latest patches to the patch. You can find the download at the Oracle's Web site: http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html

  You can use JDK with forms/States 11.1.2.1.0 7u45 because it is supported by Oracle Support certification matrix for 11.1.2.1.0: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-111210certmatrix-1886127.xls

  In addition, you can always use WebLogic 10.3.6 as it is supported with forms and 11.1.2.1.0 States.

  NOTE: When you start the setup.exe to install forms and reports 11 GR 2, I highly recommend right-click on setup.exe, then select "Run as Administrator". You must have administrator privileges to install the software.

  Thank you

  Scott (PITS)

• Windows service install does not start

  I try to install Photoshop X 4 to my computer and I get the following error.

  The Windows Installer service failed to start due to the following error:
  Access is denied.

  How can I solve this problem?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• Just bought a msi gtx 750 ti OC edition.when installed does not start, ends with a black screen and the cursor

  As indicated in the title, I bought a ti 750 gtx.

  N750Ti-2GD5/OC

  The machine had a 620 in gt and works very well with it in. When I install the ti 750 gtx, however, the boot system hangs on a black screen with cursor / underscores and a single beep.

  The system is a h8 1203, with a power of 460.

  I also have a gts 250, that also installs and works fine. Ive read a little, and there is a problem with this map and the hp system? something about the type of bios? I couldn't quite follow what has been said.

  Hello

  If you upgrade to Windows 8 (UEFI-mode Setup) and apply the BIOS posted updated so you should be able to work to the video card.

  Don't forget to create a set of external support of HP recovery before installing a new operating system.

• I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  Hello

  1. what happens when you try to start the game?
  2. do you have messages or error codes?

  Follow the steps in the article mentioned below and check if this solves the problem.

  Known graphics issues in Rise of Nations
  http://support.Microsoft.com/kb/820089

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Age of Empires 3 does not start on a vista machine, get this error "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error."

  I'm trying to play age of Empires 3 on my computer running windows vista Home premium and the program does not start. I get the error message: "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error." I tried many suggestions from Microsoft (resettlement program, reinstall in safe mode, update & reinstall the drivers for my video card, the compatibility issues with vista, updating and reinstalling directx 9.0 c, install vista service packs 1 & 2) but nothing has worked so far. I was able to play the game on the same computer with windows xp installed (it's a different hard drive that is not in the computer, and everything is the same) and it worked fine. My computer is old enough, but like I said the game worked before installing vista. ASUS A7N8x deluxe, AMD Athlon xp 3200 +, ATI radeon 9600, 2 GB OCZ ram that all suggestions are welcome. Thank you.

  Hi Raygun55,

  Welcome to Microsoft Vista answers Forum!

  This problem may occur if the Microsoft DirectX file that is mentioned in the error message is damaged or is not copied correctly.

  I suggest that you copy the file manually by following the steps and check if you are able to play the game without any problems:

  Manually copy the file

  To do this on a computer that is running Windows Vista, follow these steps:

  1 insert the disc 1 CD for one of the following games into the player from the computer:

  o Age of Empires III

  o Fable: The Lost Chapters

  o Zoo Tycoon 2

  o Rise of Nations: Rise of Legends

  2. click on start to reduce this includes this image and then click Documents.

  3. Locate, and then click computer.

  4. search and then click on the CD drive.

  5. Locate and then click the following folder:

  CD player :\ DirectX9

  Note In this folder path, the CD player represents the drive letter of the CD drive.

  6 double-click on Apr2005_d3dx9_25_x86.cab, right click on d3dx9_25.dlland then click copy.

  In Rise of Nations: Rise of Legends, double click Aug2005_d3dx9_27_x64.cab right-click d3dx9_27.dlland then click copy.

  Note Use the Apr2005_d3dx9_25_x64.cab file for the x 64 version of the Windows operating system.

  7. find one or more of the following folders, depending on the games that are installed on the computer:

  By car : \Program Files\Microsoft: Age of Empires III

  By car : \Program Files\Microsoft Games\Fable - The Lost Chapters

  By car : \Program Files\Microsoft Games\Zoo Tycoon 2

  By car : \Program Files\Microsoft Games\Rise of legends

  Note In these folder paths, drive represents the letter of the drive where the game is installed.

  8. right click on the folder of the game which is the part that is installed on the computer, and then click Paste.

  Note If you have installed more than one game on the computer, repeat steps 5 and 6 for the other games.

  You can check the link for more information: error message when you try to start a Microsoft game: "the file d3dx9_XX. DLL was not found": http://support.microsoft.com/kb/910813

  Alternatively, you can try to install the game in XP compatibility mode and check if you are able to play or not.

  Right-click on the game > click Properties > click on the Compatibility tab > select for XP compatibility mode > click OK.

  Let me know if it worked.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer does not start after installing new graphics card

  HP-envy h8-1503
  I7 - 3770 k 3.5 GHZ
  10 GB of Ram
  Windows 8.1
  
  I tried to install a new edition of diamond Raedon 7770 to replace my old 7570 and when I try to start the computer I get 6 long beeps and the power light flashes 6 times. Everything is plugged in right and the video card turns on. It will not be output to the screen tho and the computer does not start!

  I fixed it, the problem was the safe boot in my bios, when I disabled the system booted and worked perfectly since! Thanks for the advice tho!

• Satellite A205-S5804 - after installing Microsoft sync, it does not start

  Hello

  This model uses by me. I downloaded it from Vista to XP.

  After installing Microsoft Sync, you need to restart and my laptop does not start after that. HD is indicated and known on the BIOS.

  Any help please?
  BR

  Hello

  > After installing Microsoft Sync it requires a reboot and after that my laptop does not start.
  And it does n average boot t?
  You get an error message? The laptop freezes on start up? Do you get a BSOD?

  I put t know how you can solve this problem, but can you go into the advanced boot menu? You can start in safe mode?

  In my opinion Microsoft installation synchronization destroyed something in Windows and in the worst case, reinstall the whole OS.
  :(