my hp g62 cannot start virtual wifi

Similar Questions

• Mode XP error: cannot start Virtual PC Host Process...

  I installed XP Mode, download carefully the x 64 version. But when I try to start it, I get, "Cannot start Windows Virtual PC Host Process".

  Hi SibTiger,

  This happens if your PC does not support hardware virtualization based.

  How to confirm your PC can run Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/support/configure-BIOS.aspx Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Cannot start virtual machines on Windows - get "internal error."

  After restarting my computer, all the virtual machines in workstation that allows you to start now will no longer start.  Currently to get the super useless error message: "Internal error." which is of course totally shameful.

  I uninstalled and reinstalled, tried searching for "cpuidHash" in my registry to reset, which curiously is not there as part of the services, I tried to remove / delete the VMEM and even tried to create a new VM and start it without an operating system and all attempts to start no VM result in the same message.  Also get the same error when trying to boot from VMware Player.

  Key in the log error can be: "E105: PANIC: CHECK bora\vmcore\vmx\main\timeTracker_user.c:238 bugNr = 148722 '.

  Any help on how to get VMware software to service is appreciated - thanks in advance!

  Thank you Darius - had already tried.  It turns out that this specific response of spoonalious solved my problem.  Not sure what caused the problem in the 1st place, to my knowledge, nothing had changed, but after completing these steps and restart services the issue was resolved after much work.  VMware software are extremely fragile and breaks easily it seems:

  New host PC - VM will start is more (internal error - VMWare Workstation 11)

  Thanks to Darius and spoonalious for the position of solution!

• cannot start virtual machine

  I found I can not run the virtual machine, VMware give me the following message is displayed:

  "

  This product has expired and your virtual machine cannot be turned on.

  Remember that the date and time of your host machine are correctly defined.

  " There is a newer version available on the site Web de VMware Workstation:" http://VMware.com/info?ID=4 ".

  "

  I don't know that I have a right license that has not expired. I click on the menu online update, and it tell me there are no updates for this version.

  My version is 6.5.0 bulid 110068.

  Someone tell me how to do?

  Thank you!

  You are using a beta version.

  (FYI, Workstation 6.5.1 is released.)

• Cannot start the WiFi hotspot

  Suddenly, I am unable to create hotspot wifi at the command prompt in windows 8.1. because every time I face

  "wireless local area network interface is feeding down and does not support the requested operation."

  I use HP probook 4440 s.

  Please help me

  Hello Shimul2013

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forumsfor a better answer.

  Have a wonderful day!

  Mario

• Microsoft Virtual WiFi Miniport Adapter missing (hostednetwork starts but cannot connect devices)

  I upgraded my Windows 7 to Windows 8 Pro and everything worked fine, I was able to host a wifi network using the command "netsh wlan. I have a htc x, it successfully connected to the wireless network on my laptop via the netsh tha.

  But earlier, I have no idea of what happened but no device (for example, my cellphone) is able to connect to the wifi/hostednetwork hosted on my laptop. He sees the connection, but still hung on authentication / "obtain an ip address" phase and sometimes loops around that. While this same cell phone is able to connect to wifi hosted on the laptop from my friend, via the same netsh command, also it connects fine to routers wireless etc.

  I noticed that in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" has disappeared. I tried to run the command

  "netsh wlan set hostednetwork mode = command not allow."

  and then

  "command netsh wlan set hostednetwork mode = allow."

  but nothing is done, the virtual wifi adapter doesn't seem to be back. I've updated my drivers for wireless card that is "Intel Centrino Wireless - N 1030 BGN". But still no change, map of miniport does not return. Then I ran the cmd command "sfc/scannow", in the hope that maybe some file is corrupted and he could get fixed, but even after checking and restarting, it was still no effect on wifi.

  So, basically, that is what is happening, I run the command

  "netsh wlan set hostednetwork ssid = keyUsage htc = key command persist = mode abcdefgh = enable".

  and it will

  "Hosted network mode has been set to allow.
  The SSID of the network hosted has been changed successfully.
  The user key hosted network password has been changed successfully. »

  Then I run

  "netsh wlan start hostednetwork.

  and it will

  "The hosted network began.

  But in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" does not appear, instead when the connection is started, "Microsoft hosted virtual network adapter" appears and disappears when the hostednetwork is stopped. But nevertheless, no device is able to connect to this hostednetwork, stuck on authentication / phase "obtain an ip address", as a DHCP server is missing or something.

  Kindly, help me out I searched on internet a solution for almost 2 days now, but nothing helped.

  Abdoulaye.

  Follow the links and check

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/566a63d9-a5f8-4210-a5ee-48411425f5c3

  http://social.technet.Microsoft.com/forums/en/w7itproui/thread/86ab166f-0d3d-4b9b-ad7f-4b840221ac33

  http://www.SevenForums.com/network-sharing/14593-Microsoft-virtual-WiFi-miniport-adapter.html

  http://helpdeskgeek.com/Windows-7/what-is-Microsoft-virtual-WiFi-miniport-adapter/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-virtual-WiFi-miniport-adapter/cccc143a-2fa8-41EF-B4C5-20cc233c2720

  http://msdn.Microsoft.com/en-us/library/dd815252 (vs.85) .aspx

• Cannot start the HP Pavilion dv7 - Intel(r) WiFi Link 5100 AGN

  the WiFi has been disabled by the Device Manager, and I can't activate it

  When I get in the Device Manager, one! sign was shown next to Intel(r) WiFi Link 5100 AGN, and I click Properties, the device status displays the message below:

  "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on "Find solutions", it displays 'could not load driver software' and no solution appears

  I tried the function "update driver" and still no idea to him.

  not the product. My dv7 is VQ971PA #AB5. Model no. dv7-2124TX is

  Thank you!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same question so you must call HP tech support and get the replacement of the part.

• Cannot print because there is problem with Microsoft Virtual WiFi Miniport Adapter

  Original title: card WiFi miniport

  Microsoft Virtual WiFi Miniport Adapter has a device problem, it can be reinstoled? How? This problem prevents me you print. Help, please. Thank you

  Hello morning XP,.

  Thank you for the question!

  I'm sorry to know that have problems you with printing. As I understand it, you cannot print because there is a problem with the Microsoft Virtual WiFi Miniport Adapter.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3. do you get an error message when you try to print?

  Reply with answers to help you in a better way.

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206

• Cannot share Internet on Microsoft Virtual WiFi Miniport Adapter

  Hello;

  I have Windows 7 Home Premium. I used to share Internet to my laptop via a virtual WiFi router with the following command.
  netsh wlan set hostednetwork mode = allow ssid = MySSID key = My8DigitKey

  netsh wlan start hostednetwork
  
  
  then share the connection from the control panel > network and Internet > network connections > right button connected Modem > Internet sharing connected the modem to connect to the network wireless 2 (Microsoft Virtual WiFi Miniport Adapter)
  For somedays, it worked well. But now it is not. Now, it starts the virtual router and I can connect my device (phone), but can not browse the internet from the phone.

  In my short experience using hostednetwork wireless you need not to use ICS, which I believe you are trying to use. Just Setup and start hostednetwork function manually or with a third party app such as Connectify and Virtual Router and connect your wireless device, IE. iPhone or iPod Touch, or whatever.

• virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.

  virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.

  When I start this virtual machine, it prompts: unable to find the 0001.vmdk, this disc is my shot, has been deleted by mistake.

  How to restore this virtual machine.

  You need help with a revival of the 000001.vmdk deleted or do you want to repair the virtual machine so that it works without the snapshot?

  The last option, follow these steps:
  remove the virtual machine from the inventory and edit the vmx file so that it uses the basedisk. Then add the virtual machine to inventory.
  If you need data from the snapshot call me through Skype "sanbarrow" - I may be able to help

• [Q] cannot start a virtual machine - internal error [SOLVED]

  Hallo,

  I installed Workstation 8 and cannot start a virtual machine - or those created those previous or new. Turn the machine gives me an "internal error."

  My characteristics: Win 7 64-bit (SP1), Core i7 2600 K with 8 GB of Ram

  The newspaper of vmware:

  011 10 - 03 T 19: 22:38.013 + 02:00 | VMX | I120: Log for VMware Workstation pid = 3424 version 8.0.0 = Build = build-471780 option = output
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: The process is 64-bit.
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host = encoding windows-1252 = windows-1252 codepage
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host is Windows 7 Home Premium, 64-bit Service Pack 1 (Build 7601)
  2011-10 - 03T 19: 22:37.713 + 02:00 | VMX | I120: VTHREAD initialize main thread id 0 "vmx" host 6336
  2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Settings REGIONAL windows-1252-> user NULL = System = c07 c07
  2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
  2011-10 - 03T 19: 22:37.743 + 02:00 | VMX | I120: FILE: FileLockDynaLink: other process validation tools are: available
  2011-10 - 03T 19: 22:38.014 + 02:00 | VMX | I120: Hostname = KOENIG
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = d fe80::41: e6a3:5dd2:fa9f % 11
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1cf:3682:36e8:4ccb % 17
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1 d 80: 2f6e:979 c: b57d 18%
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP 192.168.1.4 =
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.30.1
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.158.1
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO 1074415970 @ 3331240Hz-> 0 Hz 1000000000
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO ((x * 2518163806) > > 23) + 322527338056
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: System uptime 321912074 us
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: command line: "C:\Program Files (x 86) \VMware\VMware" "-s" 'vmx.stdio.keep = TRUE' "-#" "product = 1; name = VMware Workstation; version 8.0.0 =; BuildNumber = 471780; licensename = VMware Workstation; licenseversion = + 8.0; ""-@ ""pipe=\\.\pipe\vmxf3ce37cf9b6f9c3e;" "D:\VM\Windows 7 x64\Windows 7 x64.vmx".
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
  2011-10 - 03T 19: 22:38.056 + 02:00 | VMX | "I120: UI connection on pipes '\\.\pipe\vmxf3ce37cf9b6f9c3e' user (null)".
  2011-10 - 03T 19: 22:38.057 + 02:00 | VMX | I120: VMXVmdb: local connection timeout: 60000 ms.
  2011-10 - 03T 19: 22:38.104 + 02:00 | VMX | I120: VmdbAddConnection: cnxPath = / db/connection / #1 /, cnxIx = 1
  2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:483]: VMAutomation: initialize VMAutomation.
  2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:780]: VMAutomationOpenListenerSocket() to listen
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Past vmx/execState/val of poweredOff
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1877, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 3, newAppState = 1881, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: VMMon_GetkHzEstimate: calculated 3411189 kHz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: VMMon_RememberkHzEstimate: calculated 3411189 kHz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC kHz estimates: Memoirs of vmmon 3411189, 3411189, osReported 3401000. With the help of 3411189 kHz.
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU 0 # TSC = 1100186590922
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 1 TSC = 1100186590888
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: # 2 CPU TSC = 1100186590603
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 3 TSC = 1100186590637
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 4 TSC = 1100186590948
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # TSC 5 = 1100186590906
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 6 TSC = 1100186590898
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 7 TSC = 1100186590836
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC of measured first delta 345
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC 387 min Delta
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC 0 3331240 Hz-> 0 to 3411189000 Hz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC ((x * 4294966339) > > 22) +-1100565306901
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: tscOffset-1100187618517
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: using TSC
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: material TSCs are synchronized.
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: PTSC current = 289960
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Module CPUID initialization failed.
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:869]: VMAutomation_LateShutdown()
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:819]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VMX VMDB Flushing connections
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)
  2011-10 - 03T 19: 22:38.129 + 02:00 | VMX | W110: Failed to initialize the virtual machine.

  I scored an error... I tried to reinstall, clean... nothing helps.

  Curiously, I can use the Player app to run all VM´s without problem...

  All solutions?

  Thanks in advance

  Marcus4Aspern

  Is - the name change "vmware.exe" with something else?

• Cannot start the physical machine converted to a virtual machine under ESXi 4.0

  Hi all

  I have 2 has with the material below

  Dell optiplex 755 2.4 Qcore 4 GB of RAM and 160 GB of HARD drive

  A performer with ESXi 4.0 other runs with Windows 2003.

  I tried to convert physical machine with "Vmware Vcenter converter Stand alone" 4.0.1 build 161434

  I used the tool on the source machine and by another machine on the network.

  The two process converts the physical machine to a virtual machine successfully without any errors.

  After conversion, the virtual machine cannot start, and shows only a small slider that is not flashing too.

  

  The physical machine have a single partition of 160 GB

  The space currently used on the physical machine is 26 GB.

  I reduced the size of the HARD drive to virtual computer with fix / light available in 40 GB.

  point to make here is that the ESX have only 160 GB HDD, so he will not be able to copy all 160 GB because of which I am reducing the 40 GB HARD drive

  I converted a few other physical machines with 40 GB HARD drive and they work well after the conversion.

  Any sugessions would be greatly appreciated.

  Thanks in advance

  Hi Sunil,

  Let me know the drive selected in the custom option controller.

  Thank you

  Krishna

• Cannot find driver Atheros virtual wifi miniport adapt for pavilion dv7 4160em...

  I reinstall windows 7 and now I can't find virtual wifi miniport driver adapt Atheros for pavilion dv7 4160em on my computer (HP) side is not on the list but I have before on my computer (and Device Manager is now gone!) How to find the right driver? In Device Manager is not on the list so I don't know which driver should I?

  Try this one:http://h30434.www3.hp.com/t5/Wireless-Internet-and-home/Atheros-WLAN-Driver-Fixes-Connection-Issues-With-Linksys-Exxxx/td-p/701407

  According to the manual of reparation for Dv7-4000, there is only one card Atheros wireless:

  Atheros AR9285 802.11b/g/nmodule

  The pilot of the link above should work...