My hp laptop keeps restarting

Hi my hp pavilion dv6000 keeps freezing I gave the phone to Pc world and they could not fix it! I had this problem for about 3 years now and I had also heard that hp wanted all the dv6000 back but my warranty was expired (this is what they said when I called them up) and now I hope that someone out there can help me to fix this thanks to laptop for playback

If you had it in a shop and they couldn't fix it. I'll assume that at least, they tested the memory and hard drive.  The most common problem with the DV series is under the video chip solder balls.  There are many examples on youtube of people reinvest their video chip:

http://www.YouTube.com/watch?v=S2jPq8Qf6g0&feature=player_embedded#t=0s

Did you run all the tests on your memory, hard drive?  Have you tried to return to the factory-installed? Try running the laptop with the battery removed and see if the problem goes away.

Tags: Notebooks

Similar Questions

  • COMPUTER TOSHIBA LAPTOP KEEPS RESTARTING ITSELF

    Hello

    I HAVE A LAPTOP TOSHIBA WITH WINDOWS 7.  MY LAPTOP KEEPS RESTARTING ON EACH 30 MINUTES OR... I BOUGHT DEFEDER PRO 15-1 TO SOLVE THE PROBLEM, BUT I CANNOT COMPLETE THE SCAN BECAUSE OF THIS PROBLEM. BEFORE IT RESTARTS I GET THREE DIFFERENT MESSAGES IN A SMALL WINDOW THAT OPENS AND ARE FOLLOWING... "WINDOWS MUST NOW RESTART BECAUSE PLUG AND PLAY ENDED UNEXPECTEDLY", "WINDOWS MUST NOW RESTART BECAUSE THE SERVICE OF POWER ENDED IN UNEXPECTED WAYS ' AND ' WINDOWS MUST NOW RESTART BECAUSE THE FINISHED UNEXPECTEDLY DCOM SERVER LAUNCHER. I TRIED SCANNING IN SAFE MODE BUT STILL HAVE THE SAME PROBLEM.  ANY SUGGESTIONS ARE WELCOME. Thank you..

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • my laptop keeps restarting

    each time, reboot to keep my lobtop

    Hi Jennifer Smith,.

    1. when exactly your laptop restarts?

    2. do you get an error message?

    3. you remember changes before this problem?

    4. what version of Windows you are running on the computer?

    Method 1: Run the fixit available in the link below and check if it's a difference-may be worth a try

    Difficulty of broken desktop shortcuts and common system maintenance tasks


    Note:
    Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

    Method 2:  Select the boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

    Method 3: check the logs in Event Viewer for more information on this problem

    Open event viewer

    What are the information in event logs? (Event Viewer)

    You might want to know

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  • Pavilion: Laptop keeps restarting

    I reset my computer and it got stuck at 29% after 12 hours I turned it and turn it back on and it took my to a menu then I clicked on trouble shooting reset my computer even once, it got stuck on 33% and then I turned off and on again and it took me to the menu again I clicked on continue for Windows and then he showed the hp logo after the screen went black and showed the logo of hp again this continues to be I tried turning off and on again, but it is just done the same thing, I've been running Windows 10

    Hi @Brandon6,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP Pavilion computer and problems with restarting and looping. Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

    Here is a link with Microsoft on how to check the file system.

    Here is a link to put the laptop in Safe Mode. Then you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

    You must return your Notebook back to the previous operating system functions. Round trip is a feature that will restore your computer to the old operating system that was installed before you upgraded to Windows 10. Pressing F11 at startup of Windows should give you a few options on the Advanced tab.

    Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

    Please let me know how it goes.

    By clicking on the Thumbs Up below, you can say thank you! .

    Thank you.

  • my laptop keeps restarting after the installation of updates

    my laptop is stuck at step 3 of 3 (only display 0% complete) after the reboot for updates, then restart again and again, with the same supposed progress, I ve let it doesn't restart on 7 times.still no good.

    Tell me what are the steps to solve this problem

    Hi Amrbialy,
    When your computer is turned on, push and hold down F8, this will bring an option before it starts on your desktop. Choose "last known good configuration".
    If this has no effect. Then do the same thing, except choose Safe Mode. When it boots to desktop click Start > all programs > Accessories > system tools > system restore.

    Then it will give you an option to choose a date to return. Choose a date before you install updates, and then click OK. Restart your computer.

    It will be useful.
    Let us know how it goes!

    Thank you

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Satellite A305 keeps restarting

    I have a Satellite A305-s6857.
    Windows xp 64 bit vista.

    This is what is happening, please bare with me it gets really confusing. Laughing out loud

    My laptop keeps restarting on its own.
    at first I thought it was overheating - so I downloaded SPECCY and clean the radiator using carbon Spray. CPU temperature average around 60 degrees.

    so after ANOTHER REFORMAT. the computer worked fine, installed all the drivers using the recovery CD. (computer remained without restarting)
    everything worked well. After you have installed all the drivers, I restarted the computer and it came

    "your account has been disabled. Please contact your system administrater' so I went safe mode created an administrator account.
    Another thing to install TOSHIBA came after rrestarting the computer where I would choose an account name and password.
    so after that I got through the process, he went on the desktop.

    After that, he did it again. Computer keeps restarting, sometimes only takes a few seconds, sumtimes lasts 5 minutes.

    RELATED ISSUE: Tuner FM from Toshiba keeps repeatedly installation and restart the computer.
    then I went to msconfig and disabled everything on start up.

    I don't know much about laptops, but in MY OPINION.

    It is a software problem, VISTA/driver problem, if its vista I think it has something to do with the admin default thing, cus when I am connected to this account, that it has not been restarted.
    but when this thing "account disabled" came and I had to use a new user, he did it again.

    AND ALSO: When in safe MODE, the computer does not restart.

    someone please get back to me.

    Thank you
    Jason winter

    Hello

    > I have a Satellite A305-s6857 running windows xp 64-bit vista.

    What Windows environment it restarts: Win Xp or Vista or both?

    > so after a REFORMATER FEES. the computer worked fine, installed all the drivers using the recovery CD. (a computer stayed on without restart) everything worked fine. After you have installed all the drivers, I restarted the computer and it came

    It looks like a driver/driver causes reboot.

    > SECONDARY QUESTION: Toshiba FM tuner keeps several times install, then by restarting the comp. I went to msconfig and disabled everything on start up

    Can remove you it at all to check?

  • P50T-B satellite keeps restarting randomly

    My laptop keeps restarting, so I lose some work if I'm in the middle of something. It was a very occasional problem, but now it becomes more regular. Someone at - it an idea what is the problem?

    I don't want to have to replace it under warranty as I put additional software on now.

    Thank you.

    Hello

    What exactly happens? What you think what could be the reason for this? I mean on this virtual path that none of us can say with certainty what could be the problem.

    Is machine hot enough when this happens? It happens when you use some specific software?
    You know there are several reasons why this can happen.

    Since when have you noticed such behavior of s to laptop?
    Try to provide some important information about your machine. Maybe this can help us understand what may be wrong with your machine.

  • laptop keeps rebooting at startup

    my laptop keep restart at the start, I tried to go into safe mode and choose a date before the problem started, he was allowed a few days and then happened again, can someone please help with this.

    OK then he must have a recovery partition, to access this press f11 or f10 one who should pull up. Once there, select the option you want.

    new installation or os fix

    hope this helps

  • My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

    My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

    Hello

    1. have you made changes on the computer before this problem?

    2. do you get an error code?

    Follow the mentioned article:

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    http://support.Microsoft.com/kb/949358

    Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

    WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    Hope the above information is helpful.

  • Help! My computer Dell laptop keeps telling me that Windows Explorer has stopped working. After that another pop up immediately comes up saying Microsoft restarts. Any ideas?

    Help! My computer Dell laptop keeps telling me that Windows Explorer has stopped working. After that another pop up immediately comes up saying Microsoft explore restarts. It does not give me enough time to get what in the start menu, I was able to start the virus scan twice but it does not end. When I run it in safe mode, it continues to be. Any ideas? I was able to access the control panel through the Task Manager, but it doesn't seem to be any abnormal process running.

    Hi Roar4life88


    1. for how long have you been faced with this problem?
    2. did you of recent changes on the computer?

    Method 1:

    You can perform a scan SFC and check. To Perform a Scan SFC -

    a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
    b. type the following command and press ENTER:
    sfc/scannow
    A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
    c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
    d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
    e. once the scan is finished, close the command prompt window, restart the computer and check.

    Check the link below for further guidance on scan SFC - mentioned
    http://support.Microsoft.com/kb/929833

    Method 2:
    Also I suggest you to check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

    Create a new user account-
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

     

    I hope this helps.

  • SWMagent keeps restarting on my laptop.

    Original title: SWMagent

    SWMagent keeps restarting on my laptop but I don't know what you could help you?

    Hi Hayley,

    We would like to know more detail from you to help you better.

    (1) have you installed software metering Agent or Manager of easy software by Samsung on your computer?

    (2) you have any software from third-party security installed on your computer?

    SWMAgent.exe is known as the Manager of easy software and it is developed by Samsung.

    Run the following fix - it to uninstall Easy Software Manager software.

    Solve problems with programs that cannot be installed or uninstalled:

    http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

    If you need help with Windows, please do not hesitate to post. We will be happy to help you.

  • computer laptop VAIO keeps restarting

    I bought my computer laptop sony vaio (model SVF15318SNB windows 8TM) April 2014 but on the month of August I have encounter a problem even now the laptop itself keep restart displaying the vaio icon but after restart 5 times or less he launched little windows. Fortunately, windows doesn't crash at all, but after 10 or 30 min it stop and restart itself. So, I look at sony nursery they check the Ram system, control the fan unfortunately, they do not find the specific target, they said that maybe it's the operating system that is causing the problem. Thus, they recover the windows. After recovery, the laptop works fine without problem. But after a few days the problem occur.so I take a recovery action after that and that during the system recovery itself close and restart this worst case is that the windows driver is impossible lock to update the system everything is lock

    I also ran the RAM, hardware scan both he could not find any error. Furthur consultation for the vaio Center care havnt done yet.

    So if there are suggestions please post and I will appreciate it.

    Hello Vishwaschangamayum,

    Thank you for believing in us giving the opportunity to help you.

    I can understand the level of frustration through which you are going. As you mentioned in your post that the problem began in August. Thus, there could be a chance that the problem originated on the Windows Update, released by Microsoft in the same month, as many customers were faced with the same question.

    These types of errors usually occur with a blue on the computer screen, when a serious problem causes Windows 8 to stop or restart unexpectedly. There are several reasons why this type of error occurs on the computer. They occur generally when there is some driver problems in the computer. However, it can be also a few other software/hardware reasons.

    Please refer to the suggestion provided by rvuerinckx replied on August 15, 2014 in the following thread.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/blue-screen-Stop-0x50-after-applying-update/6da4d264-02d8-458e-89e2-a78fe68766fd

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • BSOD Kernel_Data_Inpage_Error, now after the upgrade to Windows 8.1, computer laptop keeps auto restart

    Original title: Kernel_Data_Inpage_Error on Windows 8.

    Hello
    A few days ago my laptop continued to restart on its own, turning to a blue screen with a message saying: "Kernel_Data_Inpage_Error". Given that this happened that the sound no longer works on my laptop, I tried to update my laptop to Windows 8.1 to see if that could help solve the problem, but when he started to install my laptop itself restarted each time.
    Do you know what I can do to fix this?

    Please get back to me on that.
    Thank you.

    Mitch

    It works

    First thing.  I would update to win 8.1 when you have solved the problem

    These accidents were related to the corruption of memory (probably caused by a driver).

    Please run these tests to check your memory and find which driver is causing the problem.


    If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

    Since then, it is more likely to be a pilot run everything first.
    1-Driver Verifier (for full instructions, see our wiki here)

    If the auditor does not have the issue we move to it.

    2-Memtest. (You can learn more about running memtest here)


    If you cannot start after you have enabled the auditor reboot in safe mode
    In Vista & victory (F8)

    Co-written by JMH3143

    .

  • Satellite P300 itself keeps restarting after the initial splash screen.

    My Satellite P300 itself keeps restarting after the initial splash screen.

    Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

    That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

    Any help or advice would be much appreciated.

    Post edited by: aic-poppy

    Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
    To start the laptop in safe mode and let us know if it works, try it please.

  • Satellite M40 - 277 keeps restarting - button / stop?

    I have the problem that the (per hour to enter acient) laptop Satellite M40 277 of mine keeps restarting unpredictibally. Initially I have if it was a problem of overheating, so I used SpeedFan and CPU-Burn a test, but the computer does not restart until the airflow to the bottom is fine (I consider that the entry of the fan on the bottom a design error, but it's something else). Now, if the air flow is a bit stuffy, the laptop stops at about 83 and then it will have difficulty to challenge. Ok.

    However when the laptop is about 63C it restarts sometimes and I feel, it can be a power button is stuck. I have XP installation so that it will always ask before you actually stop, and when I pick up the phone on the side (the plastic box where the power button is integrated in waiting) I often question of the judgment. NP, just click away. But I also feel that the button can get stuck and then the system turns off after 5 seconds of 'holding company' the power button.

    So I just tried to get a quick glance and we should normally be able to remove the keyboard, but this M40 is a challenge. Even after that the keyboard is free, I don't see the actual power button.

    Is there anyway to loook under high elegant green rim the power button? How to open this thing up?

    Tom

    Hello

    As far as I know this little switch cover is fixed by 6 latches and connected with small flat cable to the motherboard. It just seems but if you don't know how to remove it you can damage these small latches and later you won't be able to fix the new.

    Anyway, if you think that this power button / troubled maybe just make the switch cover replacement may solve the problem.
    What say about it? Try to get the spare part and ask if anyone can exchange it for you.
    Of course, the best thing is to ask for professional help, but it will cool somewhat.

    Another way, do a risk and try to replace one.
    Let me know what you think of this.

    Good bye

Maybe you are looking for

  • Newly purchased HP 7520 does not scan the e-all-in-one in color on mu Mac OS 10.9

    Need help, totally frustrated. Just installed a brand new HP 7520 e-all-in-one on my new MAC OS 10.9. The product prints and copies in color. However, all scans come out in black and white?  Who can help me, desperately in need of time. I have the pr

  • Sound in Mode safe

    Note that audio service does not automatically run in safe mode.  Audio service does not appear in the list of services.  Could it be registered under a different name?  Audio services can be enabled in safe mode?  Advice requested

  • Homegroup and Firewall from Norton 360 questions

    After installing Norton 360, I see is no longer any other computer on my Homegroup network.  I can access is the only printer on our network two computers because of the Norton 360 firewall.  Norton support says that this is not their software blocks

  • Windows Live Mail, send and receive error message: error in Live Mail ID 0x8DE00001

    original title: sending and receiving erratic Today I created 2 new email my Live Mail account addresses.  Sometimes, I am allowed to send and receive, and at other times, I get an error (Server error 4102) with Live Mail error ID 0x8DE00001.  After

  • Installation of Oracle WebCenter Suite 11g

    Hi allWe have a requirement where we need to install full Oracle WebCenter Suite 11 g. I think starting with a component at a time, in the process began with WebCenter content, and once he did want to go with other products. Is this approach feasible