My HP M9500T is not always wake up...

Similar Questions

• Windows Vista will not always launch

  This issue is driving me crazy.

  My laptop starts but will not always run windows, it may take several startups or remove and replace the battery, and then it works OK. I just did a hard drive recovery, but the problem persists. He's happy to wake up in the mode sleep, but not quite as a cold start.

  Assessment diagnosis of memory indicate a problem?

  > I have a hard drive recovery, but the problem persists. He's happy to wake up in the mode sleep, but not quite as a cold start

  So, it seems that the problem is not related to the software.
  Maybe the higher temperature affect the functionality of the laptop.
  What do you think of this?

  Have you checked whether the vents s ntoebook are free of dust?
  You can remove the dust easily using the jet of compressed air

  What about a HARD disk check? I think you should also check that there is a nice tool called of Hitachi's Drive Fitness Test he s freeware so you can download for free.

• LabVIEWIOControl not always spent in VI.

  Hi all

  I use a FileGlobal in TestStand to keep a table of LabVIEWIOControls of all agrees them I accede to my request of series. I pass the variable to a particular VI (Communication.vi) several times throughout my test sequence, but some of the time VISA resource name is not passed in and a _unnamedTask «»< (0)"="" appears="" in="" the="" vi for="" the="" visa="" resource="" name="" control="" on="" the="" front="" panel="" instead="" of="" the="" comport="" name (i.e.="">

  Of course VI errors if it doesn't have a VISA reference and reports

  "VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

  -1073807346; User-defined error code. »

  However, in debug mode, when the face before poster and is the resource reference VISA without name I can if necessary select comport on the menu drop down and the VI works.

  I am tracking the FileGlobal in the window settings step TestStand and it has the correct value, and the variable is related to the VI and passed through the connector pane. How did lose the Compote value from time to time? Looks like it works for the first few VI, (it usually fires on the second or third instance of VI, but not always), but once the value continues to have spent, he's stuck like this until I complete the sequence.

  The test sequence is not new, but this error is new and in the wake of the upgrade me to TestStand 3.5 to 4.1.

  Thanks for the tips. I put .seq and vi if necessary.

  Andrew

  However, he did not participate in this thread, Congrats to Bryan Heslop, ESF for the New Mexico to help us identify the problem.

  The fundamental problem was mismanagement of resources VISA session. Using sensors in the window spy in TestStand and LabVIEW, Bryan helped us refine the question at a particular stage in TestStand, which called a VI that would close the VISA session. We had not noticed this because TestStand held the value in a fileglobal and it was not clear that the session had ended.

  Oddly enough, this same bad management of the VISA resource was / is not a problem of TestStand 3.5 apparently more lenient. There must be a difference in sessions VISA 4.1 handles how that makes it a hard failure. I was always interested to understand the difference, if someone has a preview on this.

  Thank you

  Andrew

• iPhone WiFi hotspot not always recognized

  Sometimes, my MacBook Air recognizes my iPhone as a hotspot 5SE, sometimes he recognizes it, then rejects it, and sometimes it doesn't recognize at all.

  It seems that I have to toggle the settings > cellular > Personal Hotspot several times before I can get my MacBook Air (10.10.5) to recognize my iPhone, keep the connection.

  Hello Mel Magree,.
  Thank you for using communities of Apple Support.

  If I understand your message your iPhone 5s is not always recognised by MacBook Air. I know how it is important for you to be able to use the hotspot on your iPhone 5s feature. In this situation I recommend to use the steps in the following article:

  Get help with Personal Hotspot in iOS

  Best regards.

• Sometimes when I delete a message, the message is deleted until I see it. Not always, but often.

  When I delete a message in the Inbox, sometimes the message is deleted at the same time. Not always, but often enough to be annoying. I have to go to the trash to read it or get it back.

  Try a new mouse. Sounds like your wrong and deliver a double click when you click.
  If you can press Delete on your keyboard and remove only 1 message then its your mouse.

• Images are not always displayed in received emails

  Images not always displayed in the body of some downloaded messages. They appear at the end of the message.

  can I have a few screenshot you your mail so that i can see the error.

• Why do not always get my messages on my iwatch

  Why do I get not always my text messages on my I watch?

  Hello

  If you are referring to text message notifications, their behavior depends on the parameters and the status of your devices. With wrist detection enabled, in order to get notifications to your attention as soon as possible:

  -If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.

  -If your iPhone is locked or mode and your watch is unlocked (regardless of the question of whether the screen saver is awake or asleep) and on your wrist, you will receive notifications on your watch.

  -If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.

  More information:

  About notifications on your Apple Watch - Apple Support

• iPhone 5 c does not always sound during calls to the.

  iPhone 5 c does not always sound during calls to the.

  Is do not disturb on?

  This is the icon of Crescent Moon at the top right of the screen

  If yes – you can control center - activate by sliding upward on the homescreen of the lower edge and tapping on the icon

  If this is not the case - check to see if these contacts are in your blocked list

• Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Hello

  Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.

• I DOWNLOADED FLASH PLAYER BUT WHEN I TRY TO WATCH A CLIP IT IS SAID TO GET FLASH PLAYER, I HAVE ALREADY. I CONTINUE TO DOWNLOAD, BUT IT DOES NOT ALWAYS HELP

  Question
  I DOWNLOADED FLASH PLAYER BUT WHEN I TRY TO WATCH A CLIP IT IS SAID TO GET FLASH PLAYER, I HAVE ALREADY. I CONTINUE TO DOWNLOAD, BUT IT DOES NOT ALWAYS HELP. Thank you

  --> Updated Firefox to version 10.0.1

  • How to download and install Firefox on Windows

  Follow the suggestions mentioned in the section "Flash does not work properly or will not update" in the following article:

  • Flash Plugin - maintain and troubleshoot

  Check and tell if its working.

• Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I can back into my email account. Is there a way to permanently solve this problem? Thank you.

  Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I am able to get back into my email account. Is there a way to permanently solve this problem? Thank you.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • https://support.Mozilla.com/kb/cannot+log+in+to+websites

• HDR5010KB-digital recorder - signal does not always come through the use of HDMI

  Hello

  I bought the product above in October. Since then, I have had intermittent problems. When switching on the channel AV on my TV (a Panasonic TX-P42S20B) signal is not always crossed when you use the HDMI channel (I also connected via a SCART, and who works so always seems to be a problem HDMI.) It is particularly obvious when the recorder has been used for a while (be it for recording or playback.) It is not overheating (or if this is the case, not to the degree I get a warning message) and turn off the power to the electric network seems to correct the problem, but it's a pain.

  I tried to change the hdmi cable, as well as to try different channels AV on my TV and it did not help. Is this a common problem or make me a defective unit?

  Any suggestion would be appreciated

  Have you noticed the same problem using other devices connected to your TV (using the same cable)?

• CTRL + left click is not always the same as the Middle-click

  CTRL-click is supposed to open a new tab, but this does not always happen. For example in a YouTube channel, a video in the sidebar (or right-clicking and selecting new tab) Middle-click opens the video in a new tab, but ctrl-click opens in the current tab. Y at - it a fix for this?

  These links are that JavaScript links (according to elegant), which do not respond the same as ordinary hyperlinks.

  I have a userstyle installed in Firefox that adds a 'J' cursor 'hand' on most of the JavaScript links, and tells me that I need to way - click on these links - cause {Ctrl + click} will not work.
  
  http://userstyles.org/styles/233

• Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing happened until now

  Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing has happened so far.

  Same question, the lock in action field icon is absent.

• HP Pavilion x 360: micro does not always work

  Hello!

  I recently had problems with my microphone, which does not always work when using Skype. What is strange, is that sometimes it works perfectly, while other times that it is impossible for the other person to hear me. There is nothing wrong with the Wi - Fi connection while... Any ideas of what could be the problem?

  Hi @katarint ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion 360 and problems with the microphone and Skype fading out or does not. Hereis a link to download a new version which may help to solve the issue of the gradual estrangement. Please uninstall your current version and restart your computer before installing the new version.

  Here is a linkto Skype help under technical questions.

  I hope this helps.

  Thank you.