My HP Pavilion a350n does not either of my DVD players or CD.

Similar Questions

• Pavilion DV-6149nr: pavilion dv6 does not read blu ray/dvd

  Having a problem with my blu ray/dvd player. It will read the software CD and drives very well, but does not recognize blu ray and dvd. I tried reinstalling the driver, but that solves nothing. Tried to restore my system to a point when he did read those, but it does not, either.

  SGTMonkey wrote:
  

  So, is this fixable or should I just buy a new drive?

  Looks like the drive will need to be replaced. Reason to be after you restored and still the same problem of reading is then laser most likely has it reache use life. Reader of OD aren't so expensive that it just make sure yours is Sata connections and must match any player you just have to remove your plate and put it on the new drive and that will resemble nothing has changed.

• HP pavilion dv6 does not recognize the cd/dvd drive

  When I run the diagnostic it says that there is an error on the driver.

  Hello:

  Please see if this Microsoft Fix - it tool will work for you.

  http://support.Microsoft.com/kb/314060

  Paul

• Pavilion mouse does not

  Hi - I have a Pavillion DV5-1235DX, and the mouse suddenly stopped working.  I tried a flash drive in the 2 USB ports on the right side of the unit when the mouse is connected and the drive is not recognized in both.  The flash player works in port on the left side of the device, but the mouse is not recognized it.  I tried a new mouse, and it does not, either.  The touchpad works very well.  Any suggestions?

  Thank you!

  Marlene,

  If you have not already done so, try:

  • Put new batteries in the mouse - if they are weak at all, the mouse can suddenly disconnect and confuse the computer.
  • Perform the Hard Reset .  Start the computer and connect

  Hard Reset is a reset of the driver; This isn't Windows 8 resetting that installs the operating system.  The procedure to hard reset does not erase your files or it destroys your Windows installation somehow.

   

  Why a power reset works to solve some problems:

  Hard Reset erases the pilot instructions that generally persist to boot-to-boot.  The computer is forced to go to read all the 'cool' instructions of drivers and software stored on the operating system drive.  The clearing and forcing action see drivers on the disk and software can solve some problems.

  Why a power reset does not work:

  If the problem is more than a simple tangle, if 'good job' located in the operating system is not good enough - in other words, you need an update, a new driver, or there is a problem that can not be "unraveled", then reset does not work.

  If there is an underlying hardware problem power reset will not work.

  =========================================================================================

  Click on the star of congratulations !

  It's a big 'thanks' for Experts who offer assistance.

• I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at * address email is removed from the privacy *.

  Thank you very much. I hope hear from you soon. Thank you once again :)

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at e-mail removed for privacy

  Thank you very much. I hope hear from you soon. Thank you once again :)

  You have a laptop. So try the right button on your touchpad. It work?
  If so, the only remaining possibilities are:
  1. bad mouse. Get a new one.
  2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

  P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Pavilion dv9005us does not illuminate

  My Pavilion dv9005us does not light with or without the battery. I held the power to discharge remaining power, then plugged in the ac adapter shows blue light to the decision-making of the laptop, but none of the front lights light up. The motherboard is burned out? Any advice. I just got windows 7 to put on the laptop and unable to start. Bad luck!

  GDH777 wrote:

  Hello and thank you,

  but I had already done all the things that you suggested and your advice was right on point, but the laptop is a 2005 model and in its release cost a fortune, I guess we got our money wrth although I could buy 4 destops for the price of the HP Pavillion dv9005, just want to I could get it to start , with his age, he is not a value of the repair costs.

  But I so appreciated your answer... Viewied much my post but you were the only one to respond, sad for the HP forums. I went else where to get advice and got a lot of instant answers... If the laptop is still under warranty it would not have been a problem. I don't know that this model had a recal on this HP never does the model owners aware of the recall... What a pity so disappointed in HP. I bought a Lenovo y580 a year ago and I doubt that I'll never have problems with support.

  I hate to complain, but still Ty

  Remember, this is a users forum and questions are answered when you can be sure of the answer. I can say, on the one hand, if your system is an AMD-based system in the failures of graphic chipset Nvidia/AMD feared so your Board is most likely won't want to work more. Dv6000 and DV9000 HP have been candidate of choice for these chipset failures unless they have their video chipset fixed or replaced.

• 2 USB ports on the left side of my HP pavilion g6 does not

  2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

  Windows 7 64-bit, install:

  Intel USB 3.0 Host Controller Driver

• my computer hp laptop Pavilion dv6800 does not illuminate

  My hp Pavilion dv6800 does not illuminate

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Satellite C650 - 1 CT does not recognize the CD/DVD

  Hello

  I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

  Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

  System details:

  Satellite C650-1 CT PSC08E-03M001EN
  OS: Windows 7 64-bit
  Place/country: United Kingdom

  Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

  Thank you
  Lamin

  Post edited by: jammehkunda

  As first step try please remove the optical disc drive from Device Manager and restart your laptop.
  After doing this review please the Device Manager and let us know if the problem persists.

• Satellite 1900 (PS192E) - does not recognize the CD/DVD

  Hey all,.

  I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

  When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

  If there is someone out there who could give me some advice, I would be extremely grateful.

  Thank you very much

  James

  Hello

  OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
  What version of Windows is it?

  If you want to install a driver for the graphics card go into Device Manager and select Update driver.

• Tecra M5: DVD player does not read these mini DVD

  I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.

  Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.

  All the other standard size DVD, CD works good about it. Its complex and as well as irritating.

  Any suggestions?
  Why his messedup?

  Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
  Try the sascha. Maybe you are a lucky man, and it works.
  If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
  Then stops again, put the drive in the notebook and the startup of the device.
  The laptop should recognize the drive and must indicate the firmware again.

  I don't know if this will help but it s attemptable m

• Satellite A100: Does not start a recovery DVDs

  Hi guys.
  First timer here.
  I have read some of the Q & A on reboot problems the A100 since the recovery DVDs.
  It seems I have the same problems as keith.

  I want to start all over again the OS and my laptop does not start from the DVD.
  Tried the standard f12 boot from cd option. tried her "hold C on the boot option.
  Both options end with no joy.

  The screen that says "loading ramdisk image", loads the machine breaks, asks me to wait, then every time the same thing.
  The screen goes black, flashes very quickly and white and then loads from the hard disk as normal.

  Now try to hold my frustration and do something radical.
  I know that in the Q & A previous, the subject is considered as replied...
  other options?

  My following thoughts are to delete/uninstall almost every thing and try and force the thing to boot from the DVD.
  have also copied the dvd and tried to boot from the copy, always with no joy.

  Are there any other suggestions?

  Is it possible to put a partition in the existing drive and start the recovery dvd in there, then delete the junk of the original section of the drive, and then delete the partition?

  is it possible to close all essential processes and format the HARD drive?

  is it possible to reset the HARD drive somehow?

  see you soon,
  Martin

  Hello Martin

  To be honest, it's pretty strange question. There is one thing I am interesting for:
  Is - this first time, you try to use a recovery media for the installation of the OS?

  If possible, try to get the Microsoft CD/DVD facilities to see if the same thing will happen.

  In any case, I will try to give you answers to your questions.
  > Is it possible to put a partition in the existing drive and to start the recovery dvd in there, then delete the junk of the original section of the drive, and then delete the partition?
  It will not work. On the recovery of the media it is recovery image and this image must be installed correctly. You cannot "recover DVD in there. Not question

  > is it possible to close all essential processes and format the HARD drive?
  I would like to know what you understand under the 'essential processes?

  > Is it possible to reset the HARD drive somehow?
  You can't do this somehow. If you want to 'reset' HARD drive, you must delete the existing partition or delete any OS installation. After having done that, you need to install new OS. All this will be done at the beginning of the recovery procedure.

  I really don't understand what's wrong there. Please answer to my first question, and we will continue this discussion. ;)

• Lenovo Z585 does not start on a DVD - jump directly to Windows

  Hello, I just got a new IdeaPad Z585 from newegg, and I can't figure out how to boot from a disk in the drawer of the DVD.

  I tried to open the BIOS and change the boot order, as well as simply go directly to the start menu. I tried with UEFI both active and disabled, as well as Secure Boot both enabled and disabled. No matter what I try, it does not start in any DVD.

  I try to install Linux and tried different discs and distributions of this. When no even reached GRUB, I tried a Windows 7 installation disc, and even that is ignored.

  What should I do?

  Hello
  The secureboot and uefi must be handicapped simaltaneously. You can try if you haven't.
  Also, could you try pressing the novo button to power your laptop. The novo button is the button of reocovery key a small next to the power button. Has then access Startup menu see if it helps.
  Concerning

• Windows Live Photo Gallery does not recognize my CD/DVD burner. How can I fix?

  I installed Live Photo Gallery (twice), but it does not recognize my CD/DVD burner, which works OK otherwise.  How can I fix?

  PCubedP

  Hello

  As the question is limited to Windows Live Photo Gallery, I suggest that you post the question on the link provided below for assistance.

  http://windowslivehelp.com/product.aspx?ProductID=20