My HP Pavilion laptop has apparently not "Bluetooth." It can be added?

Similar Questions

• g6 Pavilion laptop keyboard does not

  All of the keyboard on my computer hp laptop pavilion g6 has completely stopped working.  As it is locked?   I installed Office 2013 teacher and then it stopped working.  Not that that was the reason, but it's the only thing I did differently.

  Hello

  Try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Tap away at the button esc you start the laptop to see if it will launch the Start Menu and select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys (assuming that they work in this menu) to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Note:  If you find that the keys do not work in the Bios menu, then it is likely to be a hardware problem.

  Kind regards

  DP - K

• HP pavilion laptop computer does not start

  When I turn on my laptop it does not start. It goes to a blue screen that indicates it should be repaired. Help please

  Hello

  Error code 24 characters long drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• HP Pavilion laptop dv7 - does not start, CAPS/NumLock blinks

  After my own research Web, it seems that my laptop has a bad CPU. I'm writign this forum hoping to find confirmation of my diagnosis before I have spend money to solve the problem.

  When I try to start the laptop computer he hangs with a black screen, sounds as if it is trying to read something from the CD tray and flashes the LED lights by the SHIFT LOCK and numlock. According to the link I paste below, the CPU has stopped working. I want to be sure it's accurate before you buy a new processor. Could there be other issues, I need to address here?

  http://support.HP.com/us-en/document/c01443366

  Hi Steve2014,

  Welcome to the HP forum!

  Thanks for your post, I'm happy to help you.

  I understand that you get a black screen with no error message. The document you provided is right for the codes.  If the indicator light flashes only once, it indicates the CPU.  If you can run the diagnostics F2 at startup and launch the "Run - test, it will test the processor.»

• My HP Pavilion laptop g6 will not connect to any wireless internet access

  I have dealt with this for a while now, and it just happened to no part I turned on my computer one morning and it would not connect to my wifi. I've tried EVERYTHING. My computer allows me to plug in an ethernet cable and the router and use the internet like that. I know it's not the router because I use the internet on my iPhone and tablet. When I try to connect to the internet, it has a red X where the wireless icon used to be, now the icon looks like a computer instead monitor the small bars. When I type my button wireless on my keyboard, a message appears and warns me that I just got my wireless turned off, but no matter if it is off or on this little button always has the light on orange. I can't understand what is happening and I would appreciate if you could help me!

  Hi katherinehill12,

  It seems like there is something wrong with the Ralink card because of the question mark. Try installing the Adapter Ralink WiFi and let me know how it goes.

  Thank you

• HP Pavilion 15 laptop: help! HP Pavilion laptop charger works not properly.

  Hey!

  My laptop charger is malfunctioning. We all know that if a device is unplugged and use it permanently, it will possibly miss fees.  If the problem is when my charger is plugged in, it do not charge the cell phone or laptop to run out of charge instead it neutralizes the battery and allows him the same percentage it is (46% will remain as 46%).  I just realized this problem last month, but I don't know what is the real problem. If this is the problem of the charger, it wouldn't charge or neutralize my battery at all. It is more likely that the port of loading is the problem but at the moment, we don't know.  What can I do?

  Misaya wrote:

  Power adapter is plugged in.

  Here are my results:

  Load capacity: 89%

  Type of warranty: 1

  Cycle Count: 97

  Manufacturer: 13-42
  Battery age: 399 days
  Serial No.: 07758 29/08/2014

  Temperature: 27 ° C

  Nominal capacity: 2800 mAh

  Full load: 2540 mAh

  Remaining capacity: 1168 mAh (45%)
  Current: 0 my

  Battery status: OK (1)
  FAILURE ID: OK

  Voltage to the terminals: 15192 mV

  Cell voltage mV 1: 3797

  Cell voltage mV 2: 3797

  Cell voltage mV 3: 3798

  Cell voltage mV 4: 3797

  Status: 00C 0

  AC: No.

  CT #: 6ECPHC29J7G5D2

  At the bottom of the results it shows power supply: no

  There is also current: 0 my in the upper part.

  Also note that load capacity: 89%. This means that your battery is exhausted. This is the max your battery can take care of.

  It is an indication of some possibilities. I would try #1 first, then #2.

  (1) a problem with the AC adapter. It's probably not that the question if you are able to remove the battery, connect the power adapter and start-up in Windows.

  (2) in the battery method control compatible ACPI Microsoft operating system device drivers could be damaged.  See the image below.

  

  Call the Device Manager.

  Uninstall the driver from the power adapter plugged. Ignore the warning.

  After it is uninstalled, right click on any device and select search the hardware changes.

  The operating system must install a new copy of the device compatible Microsoft ACPI control method battery driver.

  (3) failure of the circuit electrical distribution\charging on the motherboard

  If it does not help it is time to use the warranty. The battery, adapter and motherboard are replaceable without cost to you, as long as the warranty is still in effect.

• HP Pavilion laptop g7-1320dx: Windows 7 reinstall can not connect to Internet

  Hello everyone, I just reinstall Windows 7 on my laptop that I fixed by installing a new hard drive. It is a G7 Pavilion 1320dx laptop with Windows 7 Home Premium 64-bit. The number of product of motherboard is 649948-001, just in case where. I tried to connect to wireless internet and via a wired connection and always the message "install a driver for your network card. I already tried to install several drivers, but I don't know if I'm doing this correctly. Can someone point me in the right direction to find the right driver to get my laptop up and running again? Thank you!

  Hello:

  Here are links to drivers and ethernet services network wireless adapter you need for your model of PC...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55083.exe

  This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

  File name: sp55342.exe

• Pavilion laptop g7 does not start

  I have a HP Pavilion g7-1167dx Notebook PC running Windows 7 Home Premium.  When I turn it on, the LED only lights are LEDs of power (on the power switch and side) and the network LED on the F12 key.  I am not able to enter the diagnostics of material via the F2 key.  The fan is operating normally. It was produced before intermittently, but I wanted to just wait awhile and it would eventually start again.  When he finally is never returned, I disassembled carefully, according to the maintenance and care, guide (on an ESD protection adequate workstation) and gave it a good cleaning.  It was very dusty inside.  Unfortunately when I reassembled it, it still does not work.  The computer is a little more than two years. Product number: LW414UA #ABA

  I sent the motherboard to repair parts of computer out of Miami, Florida and they fixed it and returned.  I was told it was the video chip.  They charged $70.00.  With each shipment way I got it fixed for $90.00.   Hallelujah!  With their setting of the original motherboard, I didn't have to worry about problems of CMOS and "tattoeing" a new motherboard, which would have cost a lot more.

• HP Pavilion laptop cursor will not move with the pad of the finger.

  From the beginning to the top finger button not work or move the slider. I tried out the battery but no change. I can type my password on the keyboard but don't know how to use the keyboard rather than the fingerpad of

  Plug in an external mouse and then check and see if the touch pad is disabled in the control panel.

  I hope this helps.

• My Dell laptop has hit (not abandoned, just bumped) and now the desktop upside. Help!

  So I just got my laptop on the edge of a Chair and when I went to get up it will be falling, but it didn ' t I caught it and suddnely the display had turned upside.»  I tried to restart twice, but it is still upside down.  Everything seems to work fine, except that I'm looking at a screen backwards.

  Hello

  Right-click on an empty area of the desktop - graphics Options - Rotation

  CTRL + ALT + arrow key it also runs.

  CTRL + Alt + (up arrow), Ctrl + Alt + arrow (pointing down), Ctrl + Alt + arrow (left) and also Ctrl + Alt + arrow (right)

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My laptop has 2 discs and I can't replace a (VN7 V15 - 571G)

  I just ordered an Acer Aspire V 15 Nitro VN7 - 571 G-50VG and it came with a 1 TB drive HARD + 128 GB SSD. I tried to remove two disks and just install a 500 GB SSD instead. I cloned the content of the 128 GB SSD, which was the C: drive, while the 1 TB HARD drive is drive D:, the 500 GB SSD using Macrium.

  When I started to disassemble the laptop, I couldn't find the 1 TB HARD drive, it was under the keyboard and to the right, as in other models that I found on YouTube. I removed that and installed my 500GB SSD. I booted up my laptop to find that it still initialized from the 128 GB SSD. Because I could not find, I thought to leave there and instead of the 500 GB SSD boot by changing the boot order. I made and noted that the 128 GB SSD was labeled 'HDD0' and the 500GB SSD was labeled "HDD1. However, he kept always begin on the 128 GB SSD!

  So, where can I find this 128 GB SSD so I can go out and put my 500GB SSD? Or, how can I change the laptop will start on the 500 GB SSD instead?

  I can send pictures of the inside of the laptop if necessary.

  Here is the link to order:

  http://www.Amazon.com/Acer-VN7-571G-50VG-notebook-computer-i5-5200U/DP/B01CL50JV6

  Thank you!

  It's on the back of the motherboard.

  

• New laptop has ms vista but no service pack added - what should I do?

  Bought a new laptop last week and tried to award-winning homevista windows update but difficulties have ever known of all service packs downloaded.

  The Department of customer services of the store that I bought suggested I bring her to the store for a refund? Its a great little notebook and think there must be a solution... not involving me having to purchase windows 7!

  Toshiba won't know because they do not support the software...

  What should I do - return or continue to try to get their hands on the necessary downloads?

  "The Department of customer services of the store that I bought suggested I bring her to the store for a refund?

  It was the good advice of sellers.

  Click Start > right click on computer > properties > it will tell you it IF there is certainly some SPs No. installed and what version of bits you > 32 bit or 64 bit

  Here's information to help you.

  And you can also try the Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• We bought paper license for Windows 7 Professional for a laptop... the laptop has now stopped working. Can I re install Windows 7 in a new laptop using the previous button?

  Operating system - Windows 7 Professional 32-bit

  Type of license - license paper

  If previous key provided with the laptop dead, no, you cannot transfer to a new laptop. OEM licenses are not transferable:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• the application of catalyst control center host on my laptop has stopped working then, what can I do?

  everything disappeared in the Favorites and also all the icons on the desktop.

  Hi alonzocarlton jr,.

  Thanks for posting your question in the Microsoft answers Forum. It is not clear to your last post if you have run a full computer scan until Rey suggested. If you have, what were the results? If necessary, you analysis your computer using Microsoft Security Essentials. It's free.

  The question follows other users on the computer?

  What is the brand and model of your computer? If your computer comes with Windows preinstalled, go to your production website and make sure you have the latest drivers for your BIOS, card mother and graphics card. Follow the steps in this link to manually install the drivers.

• HP pavilion dv6: HP Pavilion dv6 has stopped working

  Hello

  I have a HP pavilion dv6 i7 - 4 GB RAM model, I bought in 2011. The laptop worked fine until yesterday. But a sudden power cut has caused its judgment as the back of the battery is close to zero. But later when I tried to load and restart, the laptop simply did not. I can see the charge works very well, but none of the lights (power, caps lock, etc.) are on.  Even after using the old method of draining any static battery in the laptop (by pressing Start button / stop for nearly 30 secondds), the portable computer simly does not start. There is no visible boot, that nothing displayed on screen as the laptop itself is not able to start.  I tried to reset the RAM by removing and re - install in accordance with the procedure prescribed by HP. But, still no effect.

  (There is no previous repair/replacement in my laptop. Thus, all parts are those which are authentic HP)

  The situation is completely distraught for me because nothing is displayed on the screen. I have no idea if the laptop is under tension, or not. Although I tried restarting without battery. The results were the same.

  Any help would be appreciated.

  Thank you.

  Hi @Durvank_Yewle,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and laptop does not turn on. Try perform a reset.  There are many tips here.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Plug the adapter into a different wall outlet. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Here is a link to computer does not start for Windows.

  Here's a video that might help. It shows you how to reinstall the HARD drive, which is sometimes useful.

  Please let me know how it goes.

  Thank you.