my hp Tower light,

Similar Questions

• HP Envy Desktop 700-414: HP ENVY flashing light red Desktop PC 700-414

  We just got two HP ENVY 700-414 Desktop PC. On one of them when he sleeps the red light on the front of the Tower lights on. The light on the other computer turns on but does not Flash. What caused the flash light and we should be concerned?

  Yes, it's supposed to blink. In fact, the flashing is to let you know that it is dormant and not offshore.

• Lights up turn of the computer - monitor remains blank

  • About 5 days ago, I was using my computer as usual. I have a game, was talking to some people and play music, everything works fine. Out of nowhere, my screen locked up, I thought he was just a typical gel, so I waited a minute or two while trying things like the Ctrl alt del and alt + tab, none of these things, do nothing at all. To speed up the process, I turned off the computer manually and turned it back. After back on the screen remains empty. When the device is turned on and that everything is working normally, the light on the power button on the monitor to blue. When the computer is not turned on but the monitor is, or when the computer is in "standby", the power button goes orange. After turning on the actual computer monitor screen remained pure black, and that the switch remained orange. The computer itself seems to turn on normally, the green light in the back turns on and remains solid, the two fans inside the Tower lights up and there is the noise of typical general snoring from the computer. Since then, I tried to unplug drain all the power and turn it back on, I reinstalled the RAM, I checked the card plugged into the VGA port has been completely connected (it was a problem in the past after sending in my computer when the VGA port had been fried. The symptoms at the time were essentially the same ones they are now corrected again when an operator HP had me check if this card was plugegd, it was not completely, I pushed it and it worked fine.) Anyway, this time I tried this card verification. I pushed a little more to check if that was the problem, it doesn't change anything. I tried another monitor (with a different cable), that doesn't change anything. My warranty on the computer turns off, so my only way to contact HP for help is with the online chat, and this conversation has done me any good. They had me try all the things I had already tried and then just told to take it into a store.
  • The computer in question is a HP Pavilion Media Center TV m8020n PC
    http://h10010.www1.HP.com/wwpc/ca/en/Ho/WF06b/12132708-12133156-12133158-12133158-12133158-79681383-80144481.html
  • The operating system is windows vista Home premium
  • I don't have something new installed recently, the only thing I can think anywhere near it at all in the last few weeks would try to load a camera to plug into a USB port on the front and put the memory card from the respective device in one of the memory of the computer on the front card readers.

  No, the second port works do not means that the embedded video is disabled. Here's a video explaining how to remove the video card. It has a tab, that you must move to release the card. Scroll down and you will see the different models.

  http://support.HP.com/us-en/document/c01177594

  It could still be the video card. Try to remove the card completely and the embedded video. Since your unable to see the screen, you can not enter the bios to see if the edge can be activated but sometimes when the card is to remove the edge can activate itself. If no luck, try another video card.

• Power DP500 G4 problems

  Does a couple of months. Randomly, one day after several weeks, I hit the power button and it was fine. Used 4 - 5 times a few weeks since then. Evening, after about 3-4 minutes he closed as if the power supply cord had been pulled. It will not feed into. I used a browser when it happened. I know that the AC cord is on, I can hear the power click when contacts connect with the machine. Battery PRAM (?) bed 3.7V with a meter. I took it off for 10 minutes for a reboot without result. I don't see any LEDS lit on the motherboard, even if I don't remember having ever seen one, but I read that maybe there a. (A few years ago, I replaced the power supply once the Tower lights up after a power failure in the area due to lightning. We seem to have several failures each year in this area. Just for background information, do not know if there is no relationship to the current problem. )

  Hello

  The battery check was made with a resistance of 1 K series?

  Was the cord power & all devices disconnected when you have removed the battery for 10 min.?

• 750se envy: envy of the brand new office no signal to the monitor via HDMI

  Just got my new 750se envy and 25 x 25 backlit monitor. After putting it all together, I connect the monitor of the Tower via HDMI. Tower boots, display lights, I pop in setting up the drive, but the monitor says that it cannot find a signal. I test my old monitor to the new Tower (a monitor of series pavilion aged 7 years). Same results. The Tower seems to be the treatment given that you can hear what it read the disc.
  
  I take another hdmi cable and and test exactly as described above. New monitor, new Tower and new hdmi cable still no signal. Old monitor, new Tower and new hdmi cable still no signal.
  
  Just to be sure, I plug my new monitor to my old HP Pavilion desktop computer. Tower lights up as usual, and the new monitor immediately comes to life with color. I can safwly guess it's the tower. I open the side panel and check all jacks to make sure they are warm and fully attached. Nothing seems to be loose or out of place.
  
  I start to sting online for answers. I met this reset of the BIOS. Press F10 to 8 seconds, down, 3 times arrow, enter twice and restart. Nothing. Still no signal. Can I assume there is something wrong with the Nvidia GeForce GTX 960 and windows the cause? Maybe turn hdmi ports are messy? It was the only other subjects I really found on the issue. Everything seems to work, just no signal between the monitor and Tower.

  89kowens

  Since it is a relatively new machine, instead of hurt for hours to fix yourself, why not just let HP repair at our expense!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Good luck

• ImageClass MF8050cn paper gets stuck in the tray on the second page every time.

  When you print several pages first page doing very well, but then it blocks on the 2nd page every time.  Have to constantly get out the paper tray, to reach in to retrieve the pasted copy that comes with a tow light does not damage the paper at all.  Back page cluttered in the paper tray, pushing paper in the tray, press OK.  It will now print 1 page then jam again on the 2nd.

  How to solve this problem?

  Thank you, I called support and had the result of the call to a Canon authorized service center and fixed.  I was happy to find an authorized by the technical support representative gave me.  Have not taken the initiative again.

• AMD question

  Hello guys,.
  I have a problem with my computer hp laptop 1 month ago, the problem is that while I am trying to remove an applications and programs of "uninstail or change a program". by mistake I removed AMD, and then I clicked on Cancel to not be deleted. From the date, I did this. My guard high heating tower, light up and down buttons do not work, and the USB on the left side not answered for a flash memory or plug my hamdsets.

  any help please!

  Hello:

  First of all, download and install the graphics driver amd and restart.

  http://support.AMD.com/en-us/download/mobile?OS=Windows%207%20-%2032

  If usb3 ports don't work, download and install both of these drivers and restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4053

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_133037_1&swEnvOid=4053

• How can I make laptop print letters dark

  When I print from Office letters are in bold black... Print the letters of high Tower light and hard to read

  Check your printer's printing preferences.

• Computer automatically "wake up" and unable to wake up mode standby when left idle

  original title: screen saver does not work, the computer automatically "wake up". Computer regularly become inactive and cannot be stopped! Forced to pull the plug.

  We have a Vostro 200 with windows vista. The computer still works very well except for two major problems. The first: the screen saver does not work. The screen goes black minute before the screen saver, but when it needs to switch to screen saver mode, the fan in the computer is a thud and the screen turns back on. The second: If the computer is not alone for extended periods of time (hours to end upward in a weird semi-off state). The monitor becomes completely black (the power light goes from green to orange) and the power of the Tower light flashes continuously. If we move the mouse or the keyboard, nothing happens. We are not able to easily to "wake up" the computer. If we hold the power button down for 10 seconds, the round ends. If restart us the breath fan aggressively, but the screen will not display anything. The only way to get the computer working again is to turn off the switch that powers the computer for ~ 1 min and then put it back in again once. After a time abnormally long start-up, the computer goes to the exact same State it was when he went to the black start (the documents are always opened ect.). Does anyone have a similar experience? I am baffled and could use some help. Thank you!

  Hello

  I would guess that you have a hardware driver that is not fully compatible with the sleep mode function. I would check with the manufacturer and system of the various devices for driver updates (do not use Windows Update to do this). If this fails to solve the problem, you can turn off "sleep" (Control Panel/Power Options, check the settings of the engine at idle) or reduce the State of "s" that the system tries to get into the BIOS system (if available).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Screen is blank, no response...

  Ok... I had this problem happen a few months and now it's happening again.  I have a Dell XPS 8100 studio.  The screen turns off and goes into 'power saving mode '.  Tower lights up, the screen will not return.  By pushing the button on the monitor delivers a message that there is no signal from the computer.  I contacted Dell and they say that the hardware is fine and it's a software problem.  Of course, I don't have a software warranty when I bought the computer so they want me to pay $250 for a guarantee to be able to go, re - install windows and do other things because of a "corrupted" Windows installation.  I just installed windows 7 service pack 1 successfully, as well as a few other updates until now I could not install.  Any suggestions?

  Hello

  No signal means there is no communication between the monitor and the computer.  The issue could be the cable that connects the two. You can try a different monitor or connect this monitor to another computer and check what is happening.

  Given that the computer passes mode this could suggest and issue with the power supply internal power saving. See the troubleshooting steps in the link given below.

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2242bc0f-6c7e-4df7-AF34-2df7741d0abb

  Also, try changing the refresh rate of the computer and check if that helps. To change the refresh rate follow the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Hope that information was useful

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Display empty Ailen ware will have r4

  After experiencing a problem with loading a game, so I decided to restart my PC. When he tried to come back, only doing things is the Tower lights and fans. I tried a few times it power off and put into service, but the same thing happens.

  So far, I opened the Tower cleaned the machine, re sitting the jury of the vid and tried the monitor with another PC.

  The monitor is good and are therefore all connections. I'm guessing that the jury of the vid is bad... any other possibilities?

  WFCxEroes

  OK I have intertwined on the video card, and nothing has changed... Maybe motherboard?

  Heck.
  Yes, maybe... but also see this, especially the article "If above fails.
  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19530277

• (Redirected) Display empty

  I had a problem with loading a game, so I decided to restart my alien ware A4. The screen never lights, nor the key board, the only thing that seems to happen is the Tower lights and some fans seem to be running.

  So far, I have confirmed that the monitor is working, I tried the other out put on the vid card, I cleaned and reinstall the vid card.  Nothing has changed... I guess the vid card is bad. Any thoughts?

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Mac Pro Tower 2012 Unresponsive (Power Light On, red LED turn on)

  Found my Mac Pro 2012 Tower responds more today with the power led and a red led light on the inside of the tower.  The subject of research and could not find anyone who had this exact question (unless I'm missing something) and I also have trouble understanding what LED light and how do I proceed.  Any advice would be greatly appreciated

  

  Remove all external and off devices, disconnect all external cables

  Check your GPU for dust/dirt/creep (where it "fits" of the socket), you can remove it but when undertaking this make sure that you are properly grounded at all times and the components are put in static free containers, then clean the inside of the computer with compressed air ensuring that you damage the connectors not blowing the white point.

  Replace the GPU and follow the instructions to reset the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

  See the yellow highlight

  

  Plug directly into a wall outlet connected to the ground not a power strip or battery backup.

  otherwise, to replace the CMOS battery on the logic board, after that leave the device unplugged for 30 minutes or more.

• HP Envy Phoenix 860-019: turn out the lights on the Tower

  Is it possible to turn off the multicolored lights on the Tower without having to open the Tower?  I don't really have the experience and the know-how to start sleeping inside a computer tower.

  @Sweeney139, welcome to the forum.

  No, there is no way to turn off the lights.  At this point, HP did not have this option available.  I had a Phoenix at the beginning and I couldn't even turn them off inside the case.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• White flashing light on my Tower in early 2008

  Hi people,

  I have a Mac Pro 2008 beginning 2.8 Mavericks 10.9.5 running 2xquald.  Since the update about a month ago my Mac is acting strange.  During the race, fans will ramp up to maximum and keep doing this until I hold the power button to turn off.  After a reboot, things return to normal.  The my screen started to freeze, and other times the Mac will only die and restart itself.  More recently, the screen froze and fans exploded, so I held the power button until it turns off, but when you restart, I had a power light flashes and it wouldn't restart.  I tried to wait a few minutes and after several attempts, restart got the same results.  Then I unplugged all devices and it restarted.  I have shut down once again, plugged in, and it restarted correctly.  Is an OS problem or a hardware problem?  Thank you!

  Please after the release of EtreCheck

  <https://discussions.apple.com/docs/DOC-6174>

  <http://etrecheck.com>

  It is possible that you have some installed 3rd party additions that don't play nice with the Mavericks.  This happens often.

  You can also try to start in safe mode

  <http://support.apple.com/kb/ht1564>

  It's just an experiment, but it won't load 3 additions of party, and if things are more stable in safe mode is a very strong indication that the 3rd party software is the first cause.