My ibook G4 Leopard crashes during the installation of the software HP 3050

Similar Questions

• My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  If you have not yet installed any Adobe application, try step below and check.

  Step 1

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. ( "Don't miss ~ symbol" )

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the OOBE, OOBE old and AAMUpdater to old AAMUpdater.

  Step 2

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  It will open the folder System Library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the folder Caps Caps-old and young OOBE to centenarians, OOBE Adobe Application Manager of Adobe Application Manager.
  

  
  

  Step 3)

  Basket of Adobe Application Manager of Applications > utilities.

  Step 4) [same step again]
  

  Click on the link below and download Adobe Application Manager and install the same:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

  Once the update is complete.

  Restart the computer once and try to install CS 6.

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Equium A60 crashed during the update of the Bios

  Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
  Thanks in advance

  I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

  The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• Windows 8 crashed during the last update, now wants to save and may not do.

  Windows 8 crashed during the last update. Stuck at 30% for more than 4 hours before I finally pressed the power button to restart the system. Windows 8 Pro with Media Center now says system build 9200 at the bottom right of the screen.

  Whenever I try to activate Windows 8, it cannot connect. When you use the command prompt Windows + R and slui 3 with my purchased serial number I get Code 0 x 80070424. Description: The specified service does not exist as an installed service.

  Hello

  This error can appear if your firewall settings prevent Windows to complete the online activation process. To resolve this problem, you can activate Windows by phone instead.

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)
  2. Type SLUI 04 in the search box, type or click on applicationsand then tap or click SLUI 04.
  3. Follow the instructions on the screen.

  Hope this helps

• HP T610 more: HPDM deployment for t610 image more crashes during the installation of the new initial start of the image

  We are working on the update of our thin clients HP T610 more.  Update us the thin clients in the last image of the OS WES7P and also update to IE11 and Citrix receiver 4.4.

  We use HPDM 4.6.4

  We have successfully several T610s and update the image of the OS and related software with no problems.  We are then able to use the 4.6.4 to successfully shoot HPDM and image of these thin clients updated in the master repository.

  We then create a task to deploy the new image to several thin clients.  We configure the task to use the imagery being cached, and then run the task.  HPDM then successfully deploys the image for thin clients.

  Customers accept the image cache and once the image is fully downloaded they restart to deploy the image.   After the restart, the image unfolds and decompresses correctly, then the thin client, start the original installation of Windows.

  But for 90% or more of these newly imaged thin clients that they get hung up during the installation of Windows (usually during the message that windows is written to the Registry).  Once the thin clients get hung at this stage they are inaccessible and unrecoverable by HPDM and must be copied via USB.

  We believe that the issue is somehow related monitors are connected to thin clients.  If isolate us completely thin clients monitors, then deploy an image the new image is OK.  HPDM reports that the image has been deployed successfully.  If we then go back to thin clients and reconnect the monitors of the thin client is updated and the screen seems to be in standard vga mode low resolution.  A restart of the thin client then recognizes and sets the appropriate screen resolution, and the thin client is good to go.

  What is normal sound monitors must be separated to deploy a new image?

  Thanks for any idea or thougts.

  From the point of view HPDM, disconnect monitor is not required when you deploy the image. Personal thought is that there is a compatibility problem between the display driver, graphics card and the system. Installing Windows intend to write a default registry value based on connected monitor (maybe display settings), for some reason, he was stuck. I'm not the driver or the operating system that you are an expert, I would say that you submit a ticket to HP for additional troubleshooting.

• ESX 4i + installation problem [crashes during the spin of stage.tgz?]

  Hey,.

  I have a HP DL580 G2, and I have some weird problems during the start-up phase of the cd. It follows the usual sequence of decompression .tgz various events? files and then stops on one and hangs... I left for about 2 hours and nothing. The dvd is ok boot on my laptop, and I exchanged the disc in the machine with an another dvd - rom. The machine was running 3.5 previously without problems. Is there a switch I missed like noacpi or as I write at startup?

  I'll take the exact file it hangs on tonight, I just wanted to see if anyone had a suggestion in the meantime?

  Thank you

  Jonathan

  You can check it out here - http://processorfinder.intel.com/

• Tecra M2V crashes during the Windows 2000 format

  I'm working on the installation of Windows 2000 for a laptop Tecra M2V in my school. The installation process crashes when the disk has reached 6% format. It is always in the same place that the deadlock occurs. Is there a way to get around this, or can I change a setting in the bios Setup? Any help appreciated.

  Hello

  Not easy to say what can be the problem, but if the formatting process always freezes at the same place I assume that there is a problem with the HARD drive sector faulty or bad. I recommend you to check the HARD drive using a tool. Google a bit and you will find many tools for free.

  Good bye

• Satellite A210-15Y crashed during the update of the bios

  The worst case has happened and the laptop computer crashed during an update of the bios. I know that there is the possibility to repait the bios with a tool of recovery from crisis. For this purpose you have to press 2 keys (in most cases FN + B or Win + B) during the connection of the supply cable and the next start. I tried many books, but nothing happened. Can someone tell me the keys on which I have to press a 210 - 15Y satellite and maybe where I can get an image of cd of the tool of the crisis, because the laptop does not have a floppydrive?

  Hello

  As far as I know that the BIOS crisis procedure may be crazy by a technician of the ASP.
  You can not download a version of traditional BIOS who can update the BIOS from a USB FDD floppy.
  You can download only focused on the victory of the BIOS that can be run so that windows operating system is running.

  In my opinion, you should get in touch with a local ASP!

• After Effects keeps crashing during the RAM Preview? [Sound problem]

  Hey, personal Adobe! Adobe After Effects worked well during the first week! But about 3 days ago I discovered a major problem. Whenever I have add all the sound/music files in the application and click the RAM Preview, Adobe After Effect crashes. It was surprising to me because it never happened to me before. But here's the thing, if I don't add any audio files in my project and click RAM Preview, it does not crash. Any ideas on how to solve this problem?

  Thanks again!

  You should consider updating your OS and your AE.

  Apple fixed some critical bugs in that related to EI 10.10.5, so I'll try that first.

  So, if you don't mind the new cool blue colors, you should also consider updating AE - at least to the last version of CC 2014. There was a lot of bug fixes and new features added.

• program crashes during the routine of the export/media

  My updated Prem Pro CC 2014 continually crashes during export to a 10 minute video.  Content is JPEG, Go pro films and regular movies on top of music file.

  I'm glad I'm not being paid to miss this deadline...

  Thanks for the reply. 15 minutes with Adobe technology support call indicated that a new video driver was needed for my IMac.  I love simple solutions!  Could meet my customer deadline too.

  Mike

• Problem with CS5 to crash during the insertion or deletion of page

  I have a legacy file (teaching manual) which was created in CS2 and has been edited and updated over the past two years with no problems. The file is about 360 pages, with about 30 illustrations, table of contents and index larger size. During the updating of the material today, I went back to insert a page because the text to overflow and InDesign crashed. This happens whenever I try to insert or delete a single page. I can insert a single page on the pages i to viii, but when I try to insert a page in InDesign Sec2:1 early crashes. I can open and close the file, and edit anywhere without any problem.

  If I insert 2 pages at a time, it works fine and I can run the text on the page. But when I delete the extra page that I don't need, it crashes. It doesn't seem to be specific to any specific master page in the file. I tried several times to export to an IDML file, reopen and save it in an InDesign file, but the same problem occurs.

  The same thing with the file on the same verson InDesign which is on my laptop. This problem does not occur with other InDesign files that I've created in the past. I need help. Thank you!

  I just thought some about this, so I'm glad you popped up again.

  Seems to me you have two choices, go back to the previous version which works and re-do much editing or try to fix later. If you want to go back, open the file and check the bey in the history of file holding the CTRL key while you choose about InDesign from the menu help. You will see the full backup history in the lower left corner of the dialog box. I check for the latest version, that it has been saved, then open the file in this version and export into .inx (in CS4 or earlier) or .idml .idml for CS5 or later, and then open the .idml in CS5 and save as a new .indd and proceed.

  The existing file, you can divide and conquer stuff, but like I said, I thought instead, and in your shoes I would probably ignore the first step and try to export to text marked for each story, and then build a new doc by placing the tagged text. If it seems to be OK, place the images again and go ahead.

  Whatever it is, I think you have some heavy lifting.

• Satellite Pro L100 - Crash during the update of the Bios

  Hello

  I am the owner of a Satellite Pro L100 (PSLA4E)

  On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

  When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
  Is there a way to solve this?

  Thank you very much
  Rich

  Hi Richard

  Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

  Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

  Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

  Good luck and have a nice day

• DM1 #WX899UA #ABC notebook: pavilion Dm1 crashed during the attempted upgrade win7 win10

  TRIED to LEVEL WITH WIN10 media USB and after two days creating his stop because she looks stuck.

  Tried to resuscitate her for the last two days and currently hdd is no longer recognized in the bios.

  the last time I saw drive c with 15 meg of 200 GB drive was something during the chkdsk command that I fell into the 10 victory of the media creation tool repair mode. I had to 'unlock' or dismount the Volume, and all open handles subsequently would be invalid.

  (Whatever that means...).

  now I can start only from the USB port. As in the bios, there is no device found startup, there is no hard drive in the bios says hard drive test.

  now I think I need to get a win7 on USB startup file to get her going again... maybe? If yes where?

  also when I tried to download win7 from MS, REQUIRED the product key but the label is worn and were guessing the lack of tanks erase...

  Of course right about now, I have a few words of choice for bill gates... with his win 10 that my laptop is verified to be able to run!

  any suggestions are welcome. BTW, tried all the suggestions on the HP support site...

  Also makes a disc image before I looked at all this, but it is not accessible because of the bios not being able to see the hard drive...

  Thank you

  OK, thanks for this update - guess their link is more ISOs OEM.

  So here's another link - and it does not include the OEM ISOs, but again, I don't know if they will work for HP: http://www.majorgeeks.com/files/details/universal_windows_downloader.html

  Good luck