My internet it says its connected but no internet
Hi all
I have a HP pavillion 2210ed g7 and until a few days ago, my internet worked very well.
Suddenly, my internet doesn't work. The laptop says I have a good signal, but I don't have access to the internet. I thougt it was the router, but I reset it and it didn't work. On other devices internet works, its only my laptop.
I hope someone can help me.
Greetings Jesse Spliter
Hello
Before performing the following procedure, make sure that you have the means to reinstall AVG and any activation code required if there is a paid version.
On another PC, download and Save the relevant "Removal Tool" from the links below.
AVG removal tool - 32 bit Version.
Tool to remove AVG - 64-bit Version.
Once completed, this transfer to your laptop (just paste the desktop) and then run the removal tool - restart when asked and check if you have now access to the Internet.
If you can now connect Ok, just reload AVG and restart once the installation is complete.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Changed the old Comcast to Comcast modem / gateway Infinity with wifi. Ethernet cable lights are lit at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to a GREEN fixed?
Whenever you change your network hardware, it's always a good idea to carry out a new round of full power to all your devices. Check out the following Tip of an airport users for more details. Please post back your results.
-
My charger is plugged on my Tablet and its says its loading but the percentage custom mounted and ive tried a new charger and tried to charge it for 24 hours but still nothing... I also need plugg in the charger to use and still when I turn off the screen or tablet, it says that its loading but the percentage never rises please help!
It shows what percentage? As suggested, it's probably the battery, but it is possible that the problem is in the charging circuit instead.
-
Original title: update replication
Hey there. I recently did a factory reset and now I can't seem to install service pack 1... It says its installed but when I search for new upates I get the same so far again and again and again. any ideas?
I don't think it is a good update of the service pack, a because it was only 1.9 MB, but every once its installed, I look for new updates and get the same thing. its driving me crazy. I can't keep getting my system at a speed without this service pack
Hi Jools101,
You can try the following steps and check if it helps:
Method 1:
You can check the update history if the Service pack is installed or not. If impossible to install, then checkfor codes error.
a. click Start, all programsand then click Windows Update or Microsoft Update.
b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
c. double-click the update has failed to check the error codes.
For more information, see the article:
See the Windows updates are installed
Method 2:
You can check the article to reset the Windows Update components and check if it helps.
How to reset the Windows Update components?
Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information, you can view the article:
Also see the article:
Windows Update or Microsoft Update repeatedly offers the same update
Method 3:
You may also refer to article and check if it helps:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
For more information, see the article:
-
Windows 7 CD rom works not added new cd rom Bios same says its currency manager it says its there, but a explanation mark. Tried to remove drivers and rebooted in safe mode, the same still seems a conflict somewhere, but how do I find and fix it please.
Try to remove the UpperFilters value. by following these steps:
Copy and paste the following text in Notepad and save to a .reg file (save with the .reg extension and give a name like fixcd.reg):
First create a system restore point, and then double-click the saved .reg file, add to the registry and restart the computer.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}]
"UpperFilters" = -.
'LowerFilters ' = -. -
Win 7 Security Cleaner Pro is not let me access anything be it because it says its dangerous but I have McAfee and McAfee says: all right. Any suggestions on what to do?
Original title: Virus problems
Win 7 Security Cleaner Pro is a rogue program, it means that your PC is infected with malware
http://www.bleepingcomputer.com/virus-removal/remove-win-7-security-cleaner-Pro
-
First pro cc 2015 project file does not open... displays the logo and says its loading but it never opens up to... There is two days. I reallly need to solve this... any suggestions?
Hi Carl U.
You have solved this problem yet? If not, please contact support here.
Thank you
Kevin -
I tried to install Winows Service pack 1 for Vista repeatedly. The PC says its installed. But other programs can seem to find. for example, Norton 360 say it can not be installed because I do not have windows service pack 1
Adding to the suggestion of Anoop, you can also try the following
See the section under the tool File Checker system - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista http://support.microsoft.com/kb/936212>
http://support.Microsoft.com/kb/822798/en-us>
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates>
http://support.Microsoft.com/kb/971058/en-us>
UTC/GMT is 09:08 on Sunday, July 8, 2012
-
printer says its troubleshooting, but can't find the problem
I have a MFC-9560CDW printer
I have a Dell Optiplex 990 running on Windows 7 ProfessionalPrinter says I'm connected but she need to troubleshooting when I click on solve it says that it cannot find a problem
It worked before on that PC or you just installed it?
-
E4200 PC connects to the router and the network home and says its connected to the internet but wont
Hello
I have an E4200 and upgraded to the Cloud Connect. It was buggy, and so I went down to the firmware before that. I have all the computers works well in the House except my office. It connects to the network, he can see the other computers on the network can still do a windows update. But when I go to use google chrome or internet explore it just won't connect to the internet. Has anyone already experienced this? It does not work either if it's a wired or a wireless connection, it was fine before the upgrade downgrade and following. It is on this desk that I installed and uninstalled cloud connection thew. I know enough to set up the network, but when it does not work... .so I'm lost for what to do. Help, please!
I did a restore of the system to a point before I upgraded to Cisco Connect Cloud, and that did the trick. Thank you for your willingness to help. All is well now.
-
Computer can't find HP Photosmart D110a Printer even though it says its connected to the network
I've had my printer for almost 2 years now, and I have never had any problems until about a week ago. I have connected my printer and computer to a new wireless home network, and everything worked fine for about two weeks. Then one day, the printer was 'offline' and I couldn't get it online. So I uninstalled all the software of printer and re-installed, and now my laptop cannot find my printer at ALL. I tried all available on HP diagnostic tools and none of them can pick up the printer on my network even if, on the printer, and the report of the network Test on the printer says that everything is connected successfully. I checked the IP address of the printer, and it looks like a "Dummy" IP address: 10.59.1.250. If I type in my browser, nothing comes. I work at home, and I need my printer back on as soon as possible. Help! My computer laptop OS is Windows 7 64 bit.
Th ecomputer is connected directly to the router (with an ethernet cable)?
I'm looking on the AT & T site and he says:
- Create a safe and secure wireless home networks
- Provide wireless connections for devices such as Smartphones and
Netbooks
This leads me to believe that the router is the creation of the different networks. The printer is on and the computer is on another. There is probably a way to get then talk to each other or to force all on a single network. You can check with AT & T? (Not trying to pass the buck, but they could have a quick response.)
Treefrog
-
in more detail in my toolbar, the part on the top of my screen, I have a toolbar where I do research, etc, I click on the tap of firefox, and then add the ons and it says that my tool bar is on the top of my screen, the part of the toolbar, there is a space for the invisible toolbar How can I make visible again, I tried to download the toolbar again, downloads, it is always invisible, I hope you know what I mean, please help, thanks
none that don't give me no help, but thanks anyway, I kept looking around and said the hell with it and restored default firefox, redownloaded toolbars that I wanted and it worked.thanx, tod
-
I can't load my video or chat online it says I need 2 install adobe flash 10 drive I install but when I try always says I need to install 2 I think I deleted a driver by mistake help please thx
Hello
Flash can get corrupted
Download and save the uninstaller flash on your desktop or wherever you like from the link below
then right click on the uninstall program saved flash and run as administrator and uninstall flash player
http://kb2.Adobe.com/CPS/141/tn_14157.html
then download the latest version of the reader direct flash from adobe on the link below
Uncheck the 1 google toolbar before downloading
http://get.Adobe.com/flashplayer/
and for more information on this problem if needed:
below link is Adobe flashplayer support forums:
http://forums.Adobe.com/community/webplayers/flash_player
help troubleshooting Adobe flash player
-
Hello
clicked on a few games separately, I initially loaded on my laptop - I want to uninstall - computer said that they have been uninstalled - but if I go into my control panel I see them - but if I click on them - computer says that they are uninstalled - then why I see them again? and how to get rid of so that they can be seen?Hey,.
Try to check the place where these games were installed if you don't find them, then it must be a file any who can stay as recorded data of the games, check that the recorded data and then check in the control panel.
Also take a lok at this
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
See you soon!
-
How can I get STD?
7thtry we do not offer a trial of Acrobat Standard. We invite you to download the trial of Acrobat Professional 11 for your evalatuation. You can find differences in features between Standard and Professional at https://www.adobe.com/products/acrobatpro/buying-guide.html.
Maybe you are looking for
-
Sync with Mac Book Pro external hard drive
No recommendation for the software synchronize files between the Mac Book Pro Retina and the external hard drive / distance NAS?
-
multiplier-accumulator by using fixed representation of pint
Hello I wait with multiplier bulit battery using fixed point representation in labview but I've not found a good guide and the blocks of fixed point in the menu is small and is not enugh anyone can add simple application as in this example x: 8 sign
-
KB2758857 causing Microsoft Money Sunset crashing.
Original title: KB2758857 accidents causing I have installed all updates recent and experienced crashes. (a repeatable: Microsoft Money Sunset would break to attempt to import a.) OFX file). I saw a C++ runtime error noted. I uninstalled and reinstal
-
How to hide an update, error 0X8007064C
I get an error 0X8007064C I found that this security update is already in my computer or superseceded and I want to hide.
-
When my computer tries to update ADOBE I have error 1648?
I frequently get the automated for Adope update, my computer works, but then says error 1648. I'm not sure that the number is the same, but he did for some time. I kept just delete it but now Itunes upodate, now I can't burn CD because he needs s