My ipad model is MD516LL/a. What ipad do I have? 2? 3? 4?

Similar Questions

• I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are therefore currently operating on 9.2.1. It just says: update could not be completed, and that was in the 11-15. I pay for extra storage if this isn't the issue...

  I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are running 9.2.1. I can't get either do an iCloud backup, he repeats to me just last backup could not be completed. The last successful backup has been in November 2015. I pay for most large storage storage account is not the problem but, the fact I pay for cela and cannot use it is very frustrating = / I really need to get my backup iPhone I have a few important pictures there. I have read other posts, but nothing useful there. Is this a problem in one of the updates at this time or some other interferente app? Or? Thank you...

  Welcome to the Apple community.

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > Storage manage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > backup), reboot the device and then turn on BackUp on new.

  If this help not disable backup again, remove your existing back to the top of settings > iCloud > storage > Storage manage > backup > this device (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > general > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do with settings > iCloud > storage > storage management > backup > appliance > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• I have iPad Air and have never used my application pages. He now does not turn on and just displays "pending". The application does not open and I would like to download an application on pages to activate my use. How can I correct this situation, please?

  I have an iPad Air and have never used the app to Pages. For some time, it has not been enlightened and shows 'pending', but does not open. Now I want to resolve this situation. Any ideas, please

  Hello. It seems to be hung trying to complete the installation. You can try to remove and reinstall. To remove it, go to settings > general > storage > storage management. Expect that the apps fill, then on the Pages. You will see the used storage and a delete option. It allows to remove the existing copy. Then go to the app store, in respect of the purchase, you will see the Pages with a cloud beside her. Tap on the cloud and it should install again.

• My iPad does not have a Finder icon

  MY iPad does not have a Finder icon

  tylerjimbo321 wrote:

  MY iPad does not have a Finder icon

  I think that it is only for Macs.

• The iPad 2 Air have a mute

  The iPad 2 Air have a mute?

  https://help.Apple.com/iPad/9/#/iPad9940e758

• The real reasons on iphone-stove high 6s more and how to solve? What guarantees do we have to change the device?

  The real reasons on iphone-stove high 6s more and how to solve? What guarantees do we have to change the device?

  Hello, João,.

  Thank you for using communities of Apple Support.

  I see that you are concerned about the operating temperature of your iPhone.  Please take a look at the article linked below support to learn more about keeping your iPhone in its limits of acceptable temperature.

  Keep the iPhone, iPad and iPod touch in acceptable operating temperatures

  Take care.

• How can I find out what operating system I have when there is no original hard drive?

  I recently bought a HP Pavilion tx1000 from my understanding, it's a phone company and the hard drive was removed and destroyed. There are other issues, as there was a black screen, all lights will just not turn on the screen but have sense then fixed the problem. My question is that I bought a new hard drive and I'm sure I need to download again the OS but I can't know what the laptop operating system has 32 or 64? is there a way to discover this because I can't get past the HP logo?

  Hello

  There are 17 model numbers in this Serires of HP, you have given us.

  http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=HP%20Pavilion%20tx1000&SearchType=s-002

  If you click on any one of them, he asppears they only came out with Vista 32 bit or 64 bit Vista.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3370390&LC=en&cc=us&DLC=en&lang=en&cc=us

  To know exactly what was on this subject, I suggest you contact HP.

  http://WWW8.HP.com/us/en/drivers.html

  See you soon.

• How to see what Apple ID I have?

  After a search through the community for this topic, I found a simple and direct answer for that.  Me seems to have two Apple ID, and I can't find the password to the original immediately the bat.  I know the name, but must be able to try a few cases before coming to the right conclusion for the password.  I will lock if I try too many times?  Is there a better way to locate the other ID?

  Hi Todd M.

  If you want to see what Apple ID you have, go to appleid.apple.com on the web and at the bottom of the image, you will see the link "Forgot Apple ID or password?". Click on it and type the e-mail address that you use most often and click on continue.

  If you know your ID Apple (which is an email address), you can go to appleid.apple.com, enter the Apple ID and then type what you think is the password.  I try again and if it does not, click on the forgot password link.  Or, go directly to iforgot.apple.com.  Continuously trying different passwords block you the account for security reasons.

  Here are some resources for you:

  Apple ID - Frequently asked Questions

  If you have forgotten your Apple - Apple Support ID

  Contact Apple for the Apple ID account security support

  If your identifier Apple is locked

  If you or someone else enters your password, security or other wrong account information questions too many times, your Apple ID automatically locks to protect your security and you cannot connect to Apple services. You can unlock your Apple ID, after verifying your identity.

  When you see one of these alerts, you can go to iforgot.apple.com to unlock your account with your existing password or reset your password. After several unsuccessful attempts to unlock your account, your identifier Apple will remain locked and you can try again the next day.

  If you see a message which differs by alerts above and you can't reset your password, contact us for assistance.

  Take care

• My phone has stopped ringing, but it will vibrate and display on call incoming screen then what direction should I have it on ring outloud.  I don't remember changing anything?

  My phone has stopped ringing, but it will vibrate and display as a call comes in, so what settings should I have on that.  I don't remember changing anything?

  Have you checked the ring/silent switch on the left side of the phone?

  If the switch is slid to the back of the phone and you can see a red line above the switch (the side closest to the screen), it is in silent mode.

• Tecra M4: How to know what graphics card I have (6200, 6600)?

  Hello
  I buyed a Tecra M4 and don't know what graphics card I have...
  The shop said, it's a gforce go 6600 with 64 MB, but now I've read, that there is only one with 64 MB 6200 and 6600 with 128 MB...
  Windows and analyse the tools to say, it is "NVIDIA GeForce GO 6200 TE 64 MB / 6600 128 MB TE...»
  So, how can I know which one I have?

  Hello

  Have you checked the Device Manager? I think that here you can find a s information on your subject of an integrated graphics card.
  The second possibility is the use of the DirectX tool. Please enter in the window RUN the dxdiag command. Then the directx should appear, and you will find the detailed description on the graphics card and the properties.

  But as far as I know that the Tecra M4 has been delivered with nVIDIA GeForce FX Go6200 64 MB or 128 MB card nVIDIA GeForce Go6600 FX.

• What is loadperf I have in my event viewer?

  What is loadperf I have in my event viewer? Please explain.

  How to manually rebuild Performance counter library values

  John

• How do I know what sound card I have?

  Just had to completely reformat my (old)! PC after having some evil wear get on it - have reinstalled windows XP, but can't get any sound (just the odd system beep) - in the "Device Manager ' no sound cards don't show so cannot reinstall drivers because don't know what sound card to install to.  Guess the only way to know what sound card I have is to open the machine and quick - glance, but I'm afraid that I don't know what I was looking for.  Can anyone help?

  Hi LouiseCA,

  To determine the card's installed on your computer, you can follow one of the following method:

  Method 1:

  Display in the devices hidden in Device Manager:

  a. Click Start, click Run and then type devmgmt.msc.

  b. click on the view tab

  c. Select Show hidden devices

  d. look for the audio device.

  Method 2:

  a. Click Start, click Run, type msinfo32.exe in the Open box and then click OK.

  b. expand Components

  c. tap sound devices

  d. find the manufacturer of your audio device.

  You can check the link below for the provider of hardware and software contact information:http://support.microsoft.com/gp/vendors/en-us

  You can check the link below to install the sound card: install or remove a soundcard (for windows XP):http://windows.microsoft.com/en-US/windows-vista/Install-or-remove-a-sound-card

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HOW CAN I CHECK WHAT VIDEO CARD I HAVE

  Help, please. I WANT TO KNOW WHAT VIDEO CARD I HAVE, BUT DON'T KNOW WHERE THE SPECIFICATION OF THE SYSTEM IS ON THE COMPUTER.

  Click Start > run.  Type "dxdiag" and click OK.  The direct X diagnostic tool displays information from the video card on the display tab.  It does not show the speed of the processor, but once you know the GPU you have you can get.

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• How to find out what lifecam product I have?

  When I upgraded from vista to 7, the report said that my lifecam is incompatible. When I tried to download the software for the lifecam, he asked what product I. but it doesn't seem to be any marking on the lifecam and the report does not say what version. the report has 2 inputs for lifecam, versions 1.30.175.0 and 1.1.1.0. How can I know what lifecam product I have?

  http://www.Microsoft.com/hardware/digitalcommunication/ProductList.aspx?type=LifeCam

  The pictures he should help you to identify the camera.

  I'm surprised that there is no label on the camera or the cable. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have?

  Original title: Windows 10 upgrade options

  It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have? I know there are problems with the upgrade a 32-bit version on 64-bit directly, but it is possible to install 64-bit and have a backup installation files in the Windows.old folder.

  If you are currently running a 32-bit version of Windows 7 and you want to migrate to 64-bit Windows 10, you will need to download the 64-bit Windows 10. ISO and make a custom installation:

  How to: perform a customized Windows installation

  A custom installation will produce a Windows.old folder, but as that mentioned, it is none functional. The best thing you can do is to create an image of the system in advance if you need to go back to Windows 7:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  See also:

  What are the official update paths to Windows 10?

  Microsoft has revealed in a video of 9 Channel official upgrade paths to Windows 10:

  

  Users of Windows XP and Windows Vista will have to do a clean installation of a. ISO, so Windows 8.0 users.

  Source: http://channel9.msdn.com/Events/WinHEC/2015/OWD100

  If you try to upgrade to Windows 7 by using Windows Update, it will keep the same architecture.

  How knowledge publishing Architecture, canal and the construction of 10 Windows installed.