What is loadperf I have in my event viewer?

Similar Questions

• What are the themes common to monitor the event viewer?

  General Administration, I would like to know what common elements are usually to monitor event viewer.

  Would be verification "error or warning" Application and system be enough?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Hello

  Event Viewer follows the Windows Firewall and other security-related applications.

• Viewed surveillance applications in Event Viewer.

  Hello

  I need the ability to control the applications that have been consulted/open/run on a computer. I have checked the event viewer, but can't find anything that can make this clear for me. Can you please advise on it or just point me in the right direction.

  Concerning

  You can use auditing on Windows XP to check the user access. But you must have activated before being able to check on the access of the audit.
  Click on the following article for assistance in the verification of the configuration.

  KB Article ID: 310399 -how to audit access of the user files, folders and printers in Windows XP
  I hope this helps.
  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't open my direct messenger(msn!!) of windows... There is an error and I have to look at the event viewer (what's that?!) Help...

  Please if you know what the problem is, tell me... i have to open my msn again, thanks... !!!

  Hello

  read this

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  and they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security.

  My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security. I ran Netstat-no, but data flashed on the screen, but I can't freeze it at the screen to display the data. What keys down to hold the data on the screen to display it.
  Thank you, OTTO

  original title: interruption tcp/ip connect limits

  Hello

  Try the steps below and check if the problem persists.

  Step 1:

  Run the fix provided in the link below to reset TCP/IP and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Note:

  Step above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Step 2:

  You can check the link provided below for more information on the use of Net command in Windows XP stat.

  Netstat

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/netstat.mspx?mfr=true

• What is F-Secure goalkeeper? I found it in Event Viewer with the error

  On one of the computers I tried, I think I can get rid of some hackers or hacker, I found this F-Secure Gatekeeper in Event Viewer and they were all in front of them of the error.   We buy this software, so I don't know why it is in the event viewer.

  Hello

  • What is the full error message that you receive in the event viewer (http://support.microsoft.com/kb/308427)?
  • You the computer to the domain?
   
  F-Secure Internet Gatekeeper is a suite of real-time services to protect against computer viruses and malicious code coming business network in the web (HTTP and FTP over HTTP) and e-mail (SMTP) traffic.
   
  If you do not have any Antivirus installed, you can install Microsoft essential Security on the computer.
  Here is the link:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx 
   
  See also:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/security_ht_comp.mspx?mfr=true

   

  http://www.Microsoft.com/security/PC-security/spyware-prevent.aspx

• I would like to know why Windows does not know what it is to have the codes mean

  More recently, Windows jumped this error code:

  Windows Update error 80070436

  Windows on my computer, or all of the online database has any idea.

  Remember, it is the rule, not the exception.

  I want to know:

  (1) why he gave me a code?

  (2) why he gave me a code he himself has no idea of what it refers to?

  (3) how is it possible to find something so special as a code 8-digit that makes no sense or reference?

  (4) why this is the case almost every time?

  (5) is it some kind of joke or game who has the power of Microsoft considers it necessary to continually unfold over and over again?

  In conclusion, I would have preferred that Windows just said "it didn't work and we don't, can't or won't give a reason or explanation.

  Which means that your error.

  Services and drivers are both in the Services database. You trying to add another named, but a same named a already exists.

  Event Viewer may have more information. The newspaper should have more information.

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --
  C:\Windows\Windowsupdate.log
  C:\Windows\Windowsupdate.log
  C:\Windows\Windowsupdate.log
  C:\Windows\Windowsupdate.log

• It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have?

  Original title: Windows 10 upgrade options

  It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have? I know there are problems with the upgrade a 32-bit version on 64-bit directly, but it is possible to install 64-bit and have a backup installation files in the Windows.old folder.

  If you are currently running a 32-bit version of Windows 7 and you want to migrate to 64-bit Windows 10, you will need to download the 64-bit Windows 10. ISO and make a custom installation:

  How to: perform a customized Windows installation

  A custom installation will produce a Windows.old folder, but as that mentioned, it is none functional. The best thing you can do is to create an image of the system in advance if you need to go back to Windows 7:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  See also:

  What are the official update paths to Windows 10?

  Microsoft has revealed in a video of 9 Channel official upgrade paths to Windows 10:

  

  Users of Windows XP and Windows Vista will have to do a clean installation of a. ISO, so Windows 8.0 users.

  Source: http://channel9.msdn.com/Events/WinHEC/2015/OWD100

  If you try to upgrade to Windows 7 by using Windows Update, it will keep the same architecture.

  How knowledge publishing Architecture, canal and the construction of 10 Windows installed.

• do you have an output event initiate key tab?

  Hello

  I have a table in my form. If the user presses the tab key on the last field of the last row, I want to add another line (as happens in the tables in MS Word for example).

  My problem is: How can I find out what inititated an output on my domain event? Was it a tabulator or did the user click with the mouse somewhere else?

  I would like to write something like

  If (xfa.event.trigger = 'TABKEY') {...}

  Hope that someone had the same problem already.

  ULI

  xfa.event.commitKey returns a value based on what has been used to exit the field. 3 that a tab has been used a 1 means that the mouse has been used.

  If you can write code that looks like this:

  keypressed var = xfa.event.commitKey;
  If (keypressed == 3) {}
  App.Alert ("you left this area using a tab")
  }
  If (keypressed == 1) {}
  App.Alert ("you've left the field with the mouse")
  }

  Paul

• How to see what Apple ID I have?

  After a search through the community for this topic, I found a simple and direct answer for that.  Me seems to have two Apple ID, and I can't find the password to the original immediately the bat.  I know the name, but must be able to try a few cases before coming to the right conclusion for the password.  I will lock if I try too many times?  Is there a better way to locate the other ID?

  Hi Todd M.

  If you want to see what Apple ID you have, go to appleid.apple.com on the web and at the bottom of the image, you will see the link "Forgot Apple ID or password?". Click on it and type the e-mail address that you use most often and click on continue.

  If you know your ID Apple (which is an email address), you can go to appleid.apple.com, enter the Apple ID and then type what you think is the password.  I try again and if it does not, click on the forgot password link.  Or, go directly to iforgot.apple.com.  Continuously trying different passwords block you the account for security reasons.

  Here are some resources for you:

  Apple ID - Frequently asked Questions

  If you have forgotten your Apple - Apple Support ID

  Contact Apple for the Apple ID account security support

  If your identifier Apple is locked

  If you or someone else enters your password, security or other wrong account information questions too many times, your Apple ID automatically locks to protect your security and you cannot connect to Apple services. You can unlock your Apple ID, after verifying your identity.

  When you see one of these alerts, you can go to iforgot.apple.com to unlock your account with your existing password or reset your password. After several unsuccessful attempts to unlock your account, your identifier Apple will remain locked and you can try again the next day.

  If you see a message which differs by alerts above and you can't reset your password, contact us for assistance.

  Take care

• The real reasons on iphone-stove high 6s more and how to solve? What guarantees do we have to change the device?

  The real reasons on iphone-stove high 6s more and how to solve? What guarantees do we have to change the device?

  Hello, João,.

  Thank you for using communities of Apple Support.

  I see that you are concerned about the operating temperature of your iPhone.  Please take a look at the article linked below support to learn more about keeping your iPhone in its limits of acceptable temperature.

  Keep the iPhone, iPad and iPod touch in acceptable operating temperatures

  Take care.

• My phone has stopped ringing, but it will vibrate and display on call incoming screen then what direction should I have it on ring outloud.  I don't remember changing anything?

  My phone has stopped ringing, but it will vibrate and display as a call comes in, so what settings should I have on that.  I don't remember changing anything?

  Have you checked the ring/silent switch on the left side of the phone?

  If the switch is slid to the back of the phone and you can see a red line above the switch (the side closest to the screen), it is in silent mode.

• Tecra M4: How to know what graphics card I have (6200, 6600)?

  Hello
  I buyed a Tecra M4 and don't know what graphics card I have...
  The shop said, it's a gforce go 6600 with 64 MB, but now I've read, that there is only one with 64 MB 6200 and 6600 with 128 MB...
  Windows and analyse the tools to say, it is "NVIDIA GeForce GO 6200 TE 64 MB / 6600 128 MB TE...»
  So, how can I know which one I have?

  Hello

  Have you checked the Device Manager? I think that here you can find a s information on your subject of an integrated graphics card.
  The second possibility is the use of the DirectX tool. Please enter in the window RUN the dxdiag command. Then the directx should appear, and you will find the detailed description on the graphics card and the properties.

  But as far as I know that the Tecra M4 has been delivered with nVIDIA GeForce FX Go6200 64 MB or 128 MB card nVIDIA GeForce Go6600 FX.

• How to set fire to a single event "mouse down" when a tab control and its digital control have all two events 'mouse-down' with different function

  Hi all

  I have a digital control in a tab control. Both of them have their own events 'mouse-down' in a while loop. But when I click on the digital command, instead of raising the event of digital control only, both of these two events fired.

  Maybe I can check if the mouse is in the range of digital technology to filter events, but if the window is resized, I have to recalculate the range once again.

  Is there another way to do it?

  I pasted the test code too.

  Thank you!

  Excerpts of work

  

  Side note: I really don't like the controls on the tab and use them very rarely.  And the few times I use them, it is for tabs to which I often use to select among the screws to put in a secondary school.

• What is the 528 event in the security event viewer in Windows XP Home Edition?

  What is the 528 event in the security event viewer in Windows XP Home Edition?

  Hello

  Are you facing problems with your computer?

  Check out the link for details about event ID: 528

  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.0&EvtID=528&EvtSrc=security

  For reference:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427