My iPad using the cell instead of wifi available?
My iPad using my cell Sprint connection, even if my wifi is available. I went to the cell phone/settings data and scrolled all the way down in the right column and saw 'wifi help '. I used a lot of my allowance for the use of the data until I found this article and turned it off. When it seemed? I have never heard before, and it sounds like a bad way to cellular providers to make more money.
Wi - Fi assist has been added a few iOS updates there. When, it does rely on cellular data if there is bad Wi - Fi signal. I didn't have problems with it on my phone or my iPad, but others have reported problems sometimes. You can, as you did, switch it off. I'm not sure it's a money maker as infer you, but I've read that in iOS 9.3 it is supposed to declare the amount of data if you have assets. I would recheck your Wi - Fi when you believe it was turned on and make sure you have a solid connection and signal. Tags: iPad Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application. iPhone & iPad with the same Apple ID, Wifi Dead after # 21 #, cannot call the specific number Hi guys, I really hope someone can help out me with this one. Long story short: After a week of vacation when we left our iPhone and iPad at home, my girlfriend's iPhone did get any cell phone signal when we came back, said network unavailable in the upper left corner, then we called Fido, the cell phone company, we use to try to resolve the problem. After trying to isolate the problem by changing my SIM card in the phone and SIM card in my phone, we saw that it was related to his SIM card. The key to reset cell phone network, has changed twice between the SIM card and after a good 24 hours, his phone was on the right track with the exception that it was not able to call me and only me. We get an error call failed. But she was able to receive calls from me and everyone else. Also, we were unable to set up the voicemail. As if the phone thought she was my line because of some flying over the passage of my SIM card in the phone... This is the first problem... That we called Fido again. After the usual troubleshooting stuff (reset the network settings, restore the device in iTunes, force the restart, eject and put in the SIM card) the Lady on the line calling in the phone app, the number "# 21 #". Then BAM! no more WiFi on his phone AND his iPad connected to the same Apple ID (not a network problem as all the other device not associated with this specific apple id are ok with this network and wifi iPad literally fall from the moment I hit that famous number) when I press on my wifi network in the list It behaves as it accepts the password, but all is not connect with the wheel spinning without end. Thus, employees of die cell phone are clueless and now she can't call me and she can't go on the internet with none of its aircraft. I tried a full restoration of his phone. Tomorrow I will try the iPad on my place of work to see if it can connect to the anther wifi network, pending: 1-don't, anyone know what this # 21 # code is and how I can repair the damage he has done? 2-is my SIM card remains on his good theory and if so, what can we do about it, if not then what could cause his phone to have a call to a number failed error in particular? Thanks in advance! Not sure about the theory of SIM card, but my guess is not... don't dwell settings. The SIM card must be "read" on every power up. The code in what she you punch is a mobile PHONE for call forwarding. She must have felt you have enabled I guess. It shouldn't be anything else stop call forwarding for his phone, if it was enabled. X 230 bluetooth does not work - cannot use the cell phone as personal hotspot I try to use the bluetooth in my X 230 to connect my laptop with my cell phone. I want to be able to use my cell phone as a personal hotspot, where I am in an area where no WiFi secure. I would have thought that it would be a standard feature in a laptop that is presented as a business device, but apparently this is not the case. I installed the bluetooth driver and the updated system, as suggested by joelle... http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&docid=HT073834 and http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS012808 ... but it's still not working for me. I am now able to connect my mobile phone to my X 230, but instead of allowing me to access the internet via bluetooth, a dialog box appears that allowed me to play songs that are on my cell phone using the laptop speakers. I am disappointed that bluetooth driver has not come pre-installed on the 230 x, and I'm disappointed that I'm not able to use my cell phone as a personal hotspot for my x 230. I solved the problem myself by following the instructions on this page. http://www.kevintaber.com/2012/05/25/iPhone-personal-hotspot-via-Bluetooth-tethering-to-Windows-7/ In Windows 7, go to the control panel > hardware and sound > devices and printers How to separate 2 IPADs using the same Apple ID Problem: I have 2 iPad (IPAD 2/IPAD Air) using the same Apple ID. To maximize the storage capacity on two IPADs, how can we separate the two so that each IPAD will show its max 16 GB storage? I have to reconfigure the old IPAD back to factory setting? I create an AppleID separated for the IPAD 2? Your comments are greatly appreciated I'm not sure I understand what you're talking about. If you have two 16 GB iPads, they have only about 13 GB of storage available out of the box. Using the same Apple ID on both devices does not affect the amount of space you are using, if you sync the same content for both and in everything you turned on automatic downloads and use iCloud photo library on both devices. -What are you trying to achieve? What exactly do you do? DVD Movie factory for toshiba uses the Cell processor? Hello, can someone tell me if the DVD 5 film factory that comes with the F50 - 10Z (my machine) uses processor cell on it for the return. I tried creating many DVD and using transcoding, as demonstrated on the processor Cell HD video demonstration, but cannot see the cell processor to be used in the cell processor vista gadget. I've recently updated my OS to Vista 64-bit, is it possible I am missing some plug in HD processor for DVD 5 for Toshiba movie factory, material all the drivers are installed correctly, but you are looking for pointers? Hmm I don't think, but other DTV bundled apps do, and I think the program of the gesture as well. How can I get my new widows 7 to Acrobat 9 on the drive when you work with Outlook. Everytime I open a pdf file it opens in the drive instead of my acrobat 9 std. I hope this makes sense. Hi paulf54407224, Right-click on any PDF file & follow the steps in the screenshot below. 1) open with-> choose default program (2) select "Acrobat 9 Standard" & check the option below "always use the program selected to open this type of file". Click OK to confirm. This will make Acrobat 9 your default PDF Viewer. Kind regards Nicos To the right at Adobe. After a careful examination of many current technologies for the content of the Web site (including HTML, PHP, Java, JavaScript, MySQL, etc. and systems such as Typo3, Joomla, etc), we decided to drop everything for PDF, being an ISO standard and the de facto standard for office documents. Everyone has Acrobat Reader is installed, the plugin is also installed, and so everyone is able to display a http://.../index.pdf. Problems that are common to other sites, such as the injection of SQL code, the need to keep a backup of SQL server, the demand of space (the naked typo3 installation requires 1 GB of server space), for example, they are all simply, we do not want. Following initial considerations and the advancement, an index.pdf file monkey 200 K holds today, our entire Web site. Dynamic content is loaded by SWFs included read various .xml files. The site displays beautifully on a Mac with Safari and Acrobat X or Windows XP with any browser. There are a few problems, however, which are still pending. Describe us them here. Index.pdf of the index.html call can result in a blank page, and the Acrobat Reader plugin makes no effort to inform and help the people customer. It turns out that the v10 of Acrobat Reader is not available on all platforms. For example, linux (ubuntu v11) and solaris (v11) still have Acrobar Reader v9. On linux or solaris, you see a "3d data parsing error" whenever you open a page with swf included.» This happens all the time. It only occurs if your version is different from the version 9.2. 9.3 and 9.4 show the above error. It's a problem of multiple roles, because the latest version on these systems is version 9.4; version 10 is not available from Adobe, and most of the people are not ready to go back to version 9.2, which is not available from the default package of the System Manager. Other systems are not without problems. Apple OS x, for example, the plugin is only available for Safari. If your default browser is Firefox, Chrome or Opera, you don't see the index.pdf. You have to use Safari. Apple iOS, even Safari fails to execute the index.pdf, because Acrobat Reader is not available for this platform. We have solved most of these problems via a HTML + JavaScript loader which performs a compatibility check-up. If all tests are successful, the HTML code then calls the PDF file. If the tests fail, then a courtesy message, explaining the problem and describing the steps the user must perform to solve the problem (s). If the user does not wish to use the Acrobat plugin, then the user is redirected to the RSS STREAM. The site is based on the RSS STREAM, and so the user has access to (most of) the content of the site. You can read this code at the following address: http://www.MadreAcqua.org/index.html. It is not enough, however. We had people with Acrobat Reader X installed on supported Adobe Systems, but their browser plugin remained version9; It turned out that the update of the Reader app could not update the Player plugin. On Windows 7 + updates, with Firefox 4 + updates and Acrobat Reader 10 + the index.pdf does not display included sovereign wealth funds. Note that it works on Windows XP + updates and Adobe Reader 10 with any browser. The failure on Windows 7 is a mystery. There are also people who are sick and tired of Acrobat Reader update by hand, or do not have the skill or the time to do it. It is also the source of the recent security problems. Below you will find other problems. 1. the index.pdf includes sovereign wealth funds for its dynamic parts (RSS readers and video). Sometimes, random, sovereign wealth funds, do one of the following: they disappear (the only way to make them appear again is click on their area); they disappear and reappear as the Christmas lights (the only way to stop is to reload the page); also, they disappear or reappear when resizing the browser window. 2. the mouse wheel allows to reverse the pages instead of scrolling. Specifically, each page of the site is displayed in its entirety. If we do scroll, however, the engine should try to scroll, find that the page is displayed in its entirety, and so nothing should happen. Instead, the engine displays the next page of the PDF file. The PDF file was built with the indicator "single page view", but the engine force mode 'to enable scrolling '. This seems to be a bug in the Adobe Reader software. In short, dear Adobe, please ensure that all platforms have the same version of the Acrobat Reader plugin, and that the plugin is updated automatically, in the same way to Flash Player 10.3. One plugin (pdf + swf) would also be useful. Please also make a charger official as part of the plugin, both to solve (mostly) the above problems and increase your own awareness of them. Otherwise implies your inability to offer its support to HTML ++. Best regards M.A.S.T. Not a bug - you're wrong points. If you embed a SWF file usinguniversal mode (Acrobat 8 and earlier versions) l, then it will never print, because it is never part of the PDF page. Legacy content is an annotation that is managed by an external program (in the case of the legacy SWF, a copy of office of Flash Player). For security reasons, there is no communication between the engine PDF printing and that the external program, so when you print the PDF file you will see nothing except the poster images. If however you embed your SWF in Acrobat 9 native mode +, it will play using the built-in Flash Player copy and will be printed, as long as you select "document and annotations" in the menu options and print on paper, it will look exactly as it does on the screen at the moment you press the button print, provided the SWF correctly handles step scaling. In addition, you can write a PDF with SWF file included for printing, but when you print it, the content of the included SWF file does not appear on the paper. This is part of our list of bugs. Photoshop using the work instead of the memory disc live available Hello I use Photoshop CC 2014, 16 GB of RAM. Strange thing: efficiency slows down, but not yet, Photoshop uses all the available memory. Why? For as far as I understand the guide: optimizing performance. Photoshop, she must use ram available first of all, that the "scratch disks". Here what is happening exactly: http://thiefunny.home.pl/pliki/photoshop-efficiency.jpg. [below the same photo]. Return 92%, max 11FR could serve, thought 8 GB available, Photoshop uses 4.5 GB: O. records of work: 1.89/10, 6GB: O My configuration: Adobe Photoshop Version: 2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532 x 64 Operating system: Windows 7 64-bit Version: 6.1 Service Pack 1 System architecture: AMD CPU Family: 15, model: 4, Stepping: 3 with MMX, entire SSE, SSE, SSE2, SSE3 FP Physical processor count: 4 Processor speed: 3210 MHz Built-in memory: 16382 MB Free memory: 8028 MB Memory available to Photoshop: 14666 MB Memory used by Photoshop: 75% Multi-frequency 3D printing: disabled. Windows 2 x UI: disabled. HighBeam: enabled. Tile image size: 1028K Image cache level: 4 Overview of fonts: medium TextComposer: Latin Display: 1 Limits of the display: top = 0, left = 0, low = 1200, right = 1920 Display: 2 Limits of the display: top = 515, left = 1920, low = 1595, right = 3840 OpenGL drawing: enabled. OpenGL allows old GPU: not detected. OpenGL drawing mode: Advanced OpenGL allows Normal Mode: true. OpenGL allows Advanced Mode: true. AIFCoreInitialized = 1 AIFOGLInitialized = 1 OGLContextCreated = 1 NumGLGPUs = 1 NumCLGPUs = 1 glgpu [0]. GLVersion = "3.0". glgpu [0]. GLMemoryMB = 1280 glgpu [0]. GLName = 'GeForce GTX 570/PCIe/SSE2. glgpu [0]. GLVendor = "NVIDIA Corporation". glgpu [0]. GLVendorID = 4318 glgpu [0]. GLDriverVersion = "9.18.13.4788". glgpu [0]. GLRectTextureSize = 16384 glgpu [0]. GLRenderer = 'GeForce GTX 570/PCIe/SSE2. glgpu [0]. GLRendererID = 4230 glgpu [0]. HasGLNPOTSupport = 1 glgpu [0]. GLDriver = "nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um" glgpu [0]. GLDriverDate = "20150313000000.000000 - 000. glgpu [0]. CanCompileProgramGLSL = 1 glgpu [0]. GLFrameBufferOK = 1 glgpu [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = '4.50 NVIDIA. glgpu [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] = [1638-4] glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [4] glgpu [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [192] glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [32] glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [32] glgpu [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8] glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [4096] glgpu [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [2048] glgpu [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [124] glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [16] glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1 glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1 glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1 glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1 glgpu [0] .extension [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1 glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1 glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1 glgpu [0] .extension [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1 glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1 glgpu [0] .extension [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 1 clgpu [0]. CLPlatformVersion = "1.1". clgpu [0]. CLDeviceVersion = 'CUDA 1.1. clgpu [0]. CLMemoryMB = 1280 clgpu [0]. CLName = 'GeForce GTX 570. clgpu [0]. CLVendor = "NVIDIA Corporation". clgpu [0]. CLVendorID = 4318 clgpu [0]. CLDriverVersion = "347.88. clgpu [0]. CUDASupported = 1 clgpu [0]. CUDAVersion = "7.0.29. clgpu [0]. CLBandwidth = 1.33921e + 011 clgpu [0]. CLCompute = 611.67 Type of license: subscription Serial number: 90970483473306459849 The application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\ Temporary file path: C:\Users\THIEFU~1\AppData\Local\Temp\ Zero Photoshop has async I/O active Scratch the volumes: D:\, 465, 7 G, 296, 6 free G S:\, 111, 8 G, 42, 4 free G Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop 2014\Required\Plug-Ins\ CC Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop 2014\Plug-ins\ CC Installed components: A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library ACE.dll CEA-2014/08/12-23: 42:09 79,557478 79.557478 adbeape.dll Adobe EPA 2013/02/04-09: 52:32 0.1160850 0,1160850 AdbePM.dll PatchMatch 2014/09/07-21: 07: 38 79,558079 79.558079 AdobeLinguistic.dll Adobe linguistic Library 8.0.0 AdobeOwl.dll Adobe Owl 5.2.4 AdobePDFL.dll PDFL 2014/08/18-15: 13: 12 79,512424 79.512424 Adobe AdobePIP.dll 7.2.1.3399 product improvement program AdobeXMP.dll Adobe XMP Core 2014/08/20 / 09: 53:02 79,156797 79.156797 AdobeXMPFiles.dll Adobe XMP files 2014/08/20 / 09: 53:02 79,156797 79.156797 AdobeXMPScript.dll Adobe XMP Script 2014/08/20 / 09: 53:02 79,156797 79.156797 adobe_caps.dll Adobe CAPS 8,0,0,13 AGM.dll AGM 2014/08/12-23: 42:09 79,557478 79.557478 ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31 Amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; Brand: Wednesday, July 30, 2014 15:59:34) 1.000000 ARE.dll ARE 2014/08/12-23: 42:09 79,557478 79.557478 Axe8sharedexpat.dll AXE8SharedExpat 2013/12/20-21: 40:29 79,551013 79.551013 AXEDOMCore.dll AXEDOMCore 2013/12/20-21: 40:29 79,551013 79.551013 Bib.dll BIB 2014/08/12-23: 42:09 79,557478 79.557478 BIBUtils.dll BIBUtils 2014/08/12-23: 42:09 79,557478 79.557478 boost_date_time.dll photoshopdva 8.0.0 boost_signals.dll photoshopdva 8.0.0 boost_system.dll photoshopdva 8.0.0 boost_threads.dll photoshopdva 8.0.0 CG.dll NVIDIA Cg Runtime 3.0.00007 cgGL.dll NVIDIA Cg Runtime 3.0.00007 Adobe CIT.dll CIT 2.2.6.32411 2.2.6.32411 Adobe CITThreading.dll CITThreading 2.2.6.32411 2.2.6.32411 CoolType.dll CoolType 2014/08/12-23: 42:09 79,557478 79.557478 dvaaudiodevice.dll photoshopdva 8.0.0 dvacore.dll photoshopdva 8.0.0 dvamarshal.dll photoshopdva 8.0.0 dvamediatypes.dll photoshopdva 8.0.0 dvametadata.dll photoshopdva 8.0.0 dvametadataapi.dll photoshopdva 8.0.0 dvametadataui.dll photoshopdva 8.0.0 dvaplayer.dll photoshopdva 8.0.0 dvatransport.dll photoshopdva 8.0.0 dvaui.dll photoshopdva 8.0.0 dvaunittesting.dll photoshopdva 8.0.0 Dynamiclink.dll photoshopdva 8.0.0 ExtendScript.dll ExtendScript 2014/01/21-23: 58:55 79,551519 79.551519 icucnv40.dll International Components for Unicode 2013/02/25-15: 59:15 Build gtlib_4.0.19090 icudt40.dll International Components for Unicode 2013/02/25-15: 59:15 Build gtlib_4.0.19090 igestep30.dll IGES 9.3.0.113 drive imslib.dll IMSLib DLL 7.0.0.154 JP2KLib.dll JP2KLib 2014/06/28-00: 28:27 79,254012 79.254012 libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch) libiomp5md.dll Intel(r) OpenMP * Runtime Library 5.0 libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0 LogSession.dll LogSession 7.2.1.3399 mediacoreif.dll photoshopdva 8.0.0 MPS.dll MPS-2014/08/18-23: 43,19 79,557676 79.557676 pdfsettings.dll Adobe PDFSettings 1.04 Adobe Photoshop CC 2014 15.2.2 Photoshop.dll Adobe Photoshop CC 2014 15.2.2 plugin.dll PlugPlugExternalObject.dll Adobe CEP PlugPlugExternalObject Dll Standard (64 bit) 5.0.0 PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (64 bit) 5.2.0.54 Adobe Photoshop CC 2014 15.2.2 PSArt.dll Adobe Photoshop CC 2014 15.2.2 PSViews.dll SCCore.dll ScCore 2014/01/21-23: 58:55 79,551519 79.551519 ScriptUIFlex.dll ScriptUIFlex-2014/01/20-22: 42:05 79,550992 79.550992 svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0 TBB.dll Intel Threading Building Blocks for Windows 4, 2, 2013, 1114 tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 2, 2013, 1114 TfFontMgr.dll FontMgr 9.3.0.113 TfKernel.dll kernel 9.3.0.113 Geom TFKGEOM.dll kernel 9.3.0.113 Adobe TFUGEOM.dll, UGeom © 9.3.0.113 updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 8.0.0.14 VulcanControl.dll Vulcan Control Library 5.0.0.82 Application VulcanMessage5.dll Vulcan Message Library 5.0.0.82 WRServices.dll WRServices Friday, March 7, 2014 15:33:10 build 0.20204 0,20204 U3D writer 9.3.0.113 wu3d.dll Required plugins: 3D Studio 15.2.2 (2014.2.2 x 001 003 x) Accented edges 15.2.2 Adaptive wide-angle 15.2.2 Angular Strokes 15.2.2 Average 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 bas-relief 15.2.2 BMP Camera Raw 9.0 Camera Raw Filter 9.0 Chalk and charcoal 15.2.2 15.2.2 charcoal 15.2.2 chrome 15.2.2 Cineon (2014.2.2 x 001 003 x) 15.2.2 clouds (2014.2.2 x 001 003 x) 15.2.2 COLLADA (2014.2.2 x 001 003 x) Halftone color 15.2.2 15.2.2 colour pencil CompuServe GIF 15.2.2 Conté 15.2.2 pencil 15.2.2 crack Crop and straighten Photos 15.2.2 (2014.2.2 x 001 003 x) Crop and straighten Photos 15.2.2 filter Hatch: 15.2.2 15.2.2 to crystallize 15.2.2 cutting 15.2.2 Dark strokes 15.2.2 deinterlacing 15.2.2 DICOM Difference clouds 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 glow Move 15.2.2 15.2.2 dry brush Eazel acquire 15.2.2 (2014.2.2 x 001 003 x) Embed watermark 4.0 15.2.2 entropy (2014.2.2 x 001 003 x) NO export VERSION color tables Extrude 15.2.2 FastCore 15.2.2 routines (2014.2.2 x 001 003 x) 15.2.2 the fibers Film Grain 15.2.2 Filters 15.2.2 Gallery Flash 3D 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 fresco 15.2.2 glass 15.2.2 Scarlet contours Google Earth 4 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 grain 15.2.2 graphic pen Halftone Pattern 15.2.2 15.2.2 HDRMergeUI HSB/HSL 15.2.2 IFF Format 15.2.2 15.2.2 IGES (2014.2.2 x 001 003 x) 15.2.2 ink outlines JPEG 2000 15.2.2 Flattening coefficient 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 goal blur 15.2.2 goal correction Lens Flare 15.2.2 Liquefy 15.2.2 Operation of Matlab 15.2.2 (2014.2.2 x 001 003 x) maximum 15.2.2 (2014.2.2 x 001 003 x) Mean 15.2.2 (2014.2.2 x 001 003 x) Measure Core 15.2.2 (2014.2.2 x 001 003 x) Median 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 Mezzotint Minimum 15.2.2 (2014.2.2 x 001 003 x) MMXCore Routines 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 mosaic tiles Multiprocessor support 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 Neon 15.2.2 paper 15.2.2 colour NTSC (2014.2.2 x 001 003 x) Ocean Ripple 15.2.2 15.2.2 OpenEXR Paint Daubs 15.2.2 15.2.2 palette knife 15.2.2 patchwork Paths to Illustrator 15.2.2 15.2.2 PCX (2014.2.2 x 001 003 x) 15.2.2 photocopying 15.2.2 Photoshop 3D engine (2014.2.2 x 001 003 x) Photoshop Touch 14.0 Photo filter package 15.2.2 (2014.2.2 x 001 003 x) Pinch 15.2.2 Pixar 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 plaster 15.2.2 plastic wrap 15.2.2 PLY (2014.2.2 x 001 003 x) 15.2.2 PNG 15.2.2 pointillism 15.2.2 polar coordinates Portable Bit map 15.2.2 (2014.2.2 x 001 003 x) Poster edges 15.2.2 People's Republic of CHINA 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 radial blur 15.2.2 radiance (2014.2.2 x 001 003 x) 15.2.2 range (2014.2.2 x 001 003 x) Read watermark 4.0 Color research grid NO VERSION rendering 15.2.2 Crosslinking 15.2.2 the ripple Rough Pastels 15.2.2 Save for Web 15.2.2 15.2.2 ScriptingSupport Shake Reduction 15.2.2 15.2.2 shear 15.2.2 asymmetry (2014.2.2 x 001 003 x) Smart Blur 15.2.2 Smudge Stick 15.2.2 Solarize 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 splash Spherize 15.2.2 15.2.2 sponge 15.2.2 sprayed strokes 15.2.2 stained glass 15.2.2 stamp 15.2.2 standard deviation (2014.2.2 x 001 003 x) STL 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 Sumi-e 15.2.2 summation (2014.2.2 x 001 003 x) 15.2.2 Targa 15.2.2 texture veneer 15.2.2 tiles 15.2.2 torn edges 15.2.2 twirl watch U3D 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 draft 15.2.2 vanishing point 15.2.2 the variance (2014.2.2 x 001 003 x) Virtual Reality Modeling Language. VRML 15.2.2 (2014.2.2 x 001 003 x) Water paper 15.2.2 15.2.2 watercolor 15.2.2 wave Wavefront | 15.2.2 OBJ (2014.2.2 x 001 003 x) WIA support 15.2.2 (2014.2.2 x 001 003 x) 15.2.2 wind Wireless Bitmap 15.2.2 (2014.2.2 x 001 003 x) Zig - zag 15.2.2 Plug-ins option and the third: NONE Plug-ins that could not load: NONE Flash: Libraries GuideGuide Adobe color themes Adobe paper Texture Pro Install TWAIN devices: NONE No, it's just not how it works. A few things will always use the scratch disk and regardless of memory real use PS for example will always be reserve enough space in the zero file as soon as you open a picture. This could get into an argument without end, so it would be better if for everyone's peace of mind, you have accepted things simply as they are. Mylenium utils is a packege so should I use the SQL instead of utils. An Oracle database is not delivered with a package called "utils". We have no idea what is this package. We do not know what it contains. If someone in your organization or a tool that you use to convert the SQL Server T - SQL code to Oracle PL/SQL code created a package which simulates some T - SQL functions, you must determine if it is useful to use this package or using the built-ins Oracle. It may be wise to normalize the using the utils package if the hope is that the vast majority of the code will be converted by a tool and not touched by man so that there is consistency between the code base. It may be wise to normalize the Oracle built-in functions if the goal is to make easily understandable code for Oracle developers who do not know the T - SQL functions that are simulated. This isn't something that we can answer for you. Justin Using the XML instead of rowImpl class? Hello You can still access a display object that is not a class Impl. Simply add custom methods or override default methods, a class of impl. If the VO is dependent on you can access them to the link view defined on the VO Campeau accessor. If they are not linked you can access AOS to find one instance of VO Frank How to use the partition instead of group by? Hello Almost all of the aggregate functions (the ones you use in a GROUP BY query) have analytical equivalents. Aggregate queries to collapse the result set. indicates how many 14 employees are in each of 3 departments. but the first query produces 3 production lines, the second query produced 14. Which should you use? As with many other things, the answer depends on what data you have and what results you want from this data. If you have a specific question, ask. Post some sample data and the results desired from this data, as Rob has said. There is another important difference between the aggreate and analytical functions: analytic functions can easily be restricted to a window , or a subset DataSet. It's something like a WHERE clause and a WHERE clause applies to the entire request: a condition of wondowing applies only to a single line. Whenever I try to open a document by Document Cloud on iPad, it says "unable to connect, please check your internet connection" even if I'm on a 4G signal. It seems to be well on WiFi, but not mobile. Any suggestions? Have no problem connecting to the Cloud of Document on laptop connected to WiFi. Hello world Thanks for your suggestions. After trying the ever conceivable solution, that I finally decided to get the network (EE) it turned out that they had accidentally blocked the site over some network settings. Since they have restored the settings, we can now access the document cloud! Thank you for your help. How to use the variable instead of the table name in the select statement of procedure Hello something like that. When you try to install Mozilla blocker of content through the Apple Store, the installation has been abandoned with the reason being that the application was not compatible with my device: an iPad running version 9.2 Development is compatible with the devices 64-bit running iOS 9 and above. Check the update by Firefox requirements section to see if your device is supported. HP 430 notebook PC: How can I get all the updates driver for my hp 430 PC laptop? Hello Windows 10 requires the updated driver for my laptop in order to take the updates to the latest version of Windows is supported. Can I get help on this issue? Thank you Cyberkhan Rotate the Plot chart legend of XY Is it possible to rotate the legend of the plot for the plot names letters run from the bottom to the top rather than in the whole of the operator interface? The names of my plots are bigger and I need to show at least four plots at the same time. Pu Question for a memory upgrade ENVY Ultrabook 6 t-1000 There is no sign of memory on this machine, so it seems that I have to remove the front panel together in order to access the memory. I don't want to damage the computer so I would appreciate some advice on how to do it properly. Cannot install windows update, error: 0X8007F0F4 Original title: Secuity update for Windows XP KB2686509. This update download but does not install. Error code is 0X8007F0F4 No Pavilion P6000 desktop no signal to follow after the lightning I had a lightning which has taken on my desktop HP P6000 computer. The model number is QN641AA. It would not be a signal to the screen. I left the power cord DVI on the graphics card to the motherboard DVI port and it worked for a few minutes. I replSimilar Questions
Then right-click on the bluetooth device (in this case, an iPhone) and choose Properties
Deselect all EXCEPT Personal Area Network Access Point
everything in translating my MS in mssql to oracle is converted into code bit: utils
utils is a set I think so is it good to use it or do I find any equivenlent sql function.
so please tel me oracle sql function for utils.patindex ();
Yours sincerely
I have the following query.
There is a class of VO1ViewObjectRowImpl in which I can access another method of the viewobjectRowImpl class. It works very well. My query is can I perform the same know to retrieve the values of all lines of the view object another without generating java class for it? In other words, is there a way to use the .xml rather than the VO2ViewObjectRowImpl class file? If so, please refer to the link where I can find the information.
Please answer this.
Thanks and greetings
I'm unable to use the partition by clause in the following cases,
the column with null values other_number contains 10 records in 'une_table '.
5 records where the date 01/11/2009, item_code = 1
5 records where the date 01/10/2009, item_code = 2
This query returns all of the records of 10, (which assume back 2)
SELECT count (a.anumber) on (partition TO_char(a.some_date,'MM'), a.item_code) AS i_count, a.item_code,.
TO_char (a.some_date, 'MM')
Of une_table
WHERE to_char (a.some_date, 'yyyy') = 2009
AND a.other_number IS NULL
Works great if I wrote like this,
SELECT count (a.anumber) AS i_count, a.item_code,.
TO_char (a.some_date, 'MM')
Of une_table
WHERE to_char (a.some_date, 'yyyy') = 2009
AND a.other_number IS NULL
TO_char(a.some_date,'MM') group, a.item_code
How to use partition of in this case?
You seem to have already discovered that, regardless of the values returned by
a comprehensive funcition using ' GROUP BY x, y, z "can also be found
an analytical function by using "PARTITION BY x, y, z".
The COUNT aggregate function:
SELECT deptno
, COUNT (*) AS cnt
FROM scott.emp
GROUP BY deptno
;
The fact the analytical COUNT function:
SELECT deptno
, COUNT (*) OVER (PARTITION BY deptno) AS cnt
FROM scott.emp
;
You could get 3 rows of output using the analytical function and SELECT SEPARATE , but it is inefficient.
If you want has collapsed of results (one line per group), it is an indication of striong you'll want features global, not analytical.
If you want a row of output for each row in the table, it is a strong indication that you'll want to analytical functions.
If you need calculate a SUM of lines with a previous of this line order_date , or an average of last 5 lines, then proabably you want to use the analytical function.
create or replace procedure scc_chemical_analysis
is
v_table_name varchar2 (100);
Start
declare
cursor c1 is select * from v_table_name; -This is the variable name. How can I use it in the select statement.
.
.
.
.
end;
1 declare
2 vSQLString VARCHAR2(32000);
3 pTableName varchar2(1000):='EMP';
4 BEGIN
5 vSQLSTRING :=
6 'SELECT ''x'' FROM ' || DBMS_ASSERT.sql_object_name(pTableName) || ' WHERE rownum<=1 ';
7 EXECUTE IMMEDIATE vSQLSTRING;
8* END;
SQL> /
PL/SQL procedure successfully completed.
Maybe you are looking for