my iPhone 5 s activate no problem to find iPhone please help me

Similar Questions

• I just spilled some water on my iPhone 6 near the speaker and listener made holes idk if water has penetrated or does it damage my iPhone please help!

  I just spilled some water on my iPhone 6 near the speaker and listener made holes idk if water has penetrated or does it damage my iPhone please help!

  See if there is an indicator of Contact liquid on your iPhone > liquid for iPhone or iPod is not covered by the warranty

• BEX / BEX64 problem event name. PLEASE HELP ME...

  I had this problem for the last two weeks and the same message appears ".exe has stopped working". Windows cannot open my MW2 single player or multiplayer file, The Witcher 3 Wild Hunt or GTA 5. He started only with MW2 and then more games like GTA and The Witcher has stopped working over time. The Witcher and put GTA BEX64 developed.  I read solutions online including DEP (prevention of data mining) troubleshooting, assessories - command prompt, check all the drivers updated, game compatibility, etc. Who fail to solve the problem. Please help me as soon as POSSIBLE!

  BTW, I know these games work first hand I played all these games above all of a sudden no longer responds.

  Modern Warfare 2

  Problem event name: BEX
  Application name: iw4mp.exe
  Application version: 0.0.0.0
  Application timestamp: 55d37e9e
  Fault Module name: StackHash_4c0d
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 80000008
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 4c0d
  More information 2: 4c0d4d78887f76d971d5d00f1f20a433
  3 more information: 4c0d
  Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433

  The Witcher 3 Wild Hunt

  Problem event name: BEX64
  Application name: witcher3.exe
  Application version: 3.0.7.2515
  Application timestamp: 56995fe3
  Fault Module name: StackHash_0584
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fefbbb3d20
  Exception code: c0000005
  Data of the exception: 0000000000000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:0584
  More information 2: 05844721ba6f46935da4f741075b96d8
  Additional information 3: cfd7
  Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5

  GTA 5

  Problem event name: BEX64
  Application name: GTA5.exe
  Application version: 1.0.678.1
  Application timestamp: 56e2b38c
  Fault Module name: StackHash_0584
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fefbbb3d20
  Exception code: c0000005
  Data of the exception: 0000000000000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:0584
  More information 2: 05844721ba6f46935da4f741075b96d8
  Additional information 3: cfd7
  Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5

  System specs

  Windows 7 64 bit

  i5 4690 K

  GTX 980 4 GB

  ASRock Z97 Extreme 4

  Samsung 500GB SSD

  3 TB hard drive

  PSU Corsair 850 RM

  Corsair 16 GB of Ram

  Thank you

  Cody Carroll

  The Module 'fault' is not positively identified as:

  Fault Module name: StackHash_4c0d
  Fault Module version: 0.0.0.0

  It can help to see al the modules that are loaded in a collision.

  You can download and run the following application (AppCrashView):

  http://www.NirSoft.NET/utils/app_crash_view.html

  Click on one of the recent errors GTA5.exe.

  Can you copy and paste the information that appears in the lower window that loaded modules.

  Do the same for a mistake witcher3.exe and iw4mp.exe.

• weird problem with new screen, please help

  Hello people,

  I hope someone can help. I am using windows 7 Home premium and I hope it is a simple solution that someone has met before. It's just that I don't know how to describe it so can't type into google to find an answer.

  This happens in all programs, Firefox, ms word Opera, basically any window I opened. The bar menu at the top of the screen is a transparent white color and everything works well, but after 50 or 60 seconds, it turns into a transparent, I can still read the Word editing, display etc. file. This is where the scroll wheel on the mouse and what I'm typing stops working. When I type something with the mounted volume, all I hear is a single beep whenever I tap on a button, but nothing is actually typed. Now, all I have to do is click anywhere in the window and it works again, but only for 50-60 seconds. I had to click on the screen twice since I started typing this because when I look at the screen, everything I typed is not there because the menu bar's transparent again while I was typing. Its driving me crazy.

  I don't remember what is a problem before, if it was I would have surely noticed. The only thing that has changed is I had been using my 32 LCD TV as a screen for a long time, but I moved and did not bring my TV with me, so I use the PC came with the computer screen. It's a PC I bought my sister a few years ago so I never used the PC screen that comes with it so don't know if it happened when she or what, she has, she can remember either. I have a updated driver, did not work. Changes the settings in customize and cannot do it helped either.

  Monitor: monitor LCD Compaq CQ1859

  Do I something pressed or clicked on something by accident?

  Is there a setting some part that I forgot?

  I plan to cast the spell by the window, its really annoying.

  Please help guys and ladies.

  Hello salamander.

  Please contact Microsoft Community.

  I can understand the inconvenience caused, be assured that we are here to help with your concern.

  1. What is the model of the computer and do ?
  2. Do you see an error message when the menu bar is transparent?

  Please follow the link below and include a screenshot in your post,

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  I suggest you follow the methods below to see if it helps.

  Method 1:

  Clean boot: to help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.  Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Important: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Note: If the problem persists, continue with method 2

  Method 2:

  Check the problem by disabling the Aero transparency feature. Please follow the steps below to disable the Aero transparency feature.

  1. Right-click on a vacuum of space on the desktop and click on personalize.
  2. Click on the link to the color of the window at the bottom of the window.
  3. Uncheck the check box enable transparency to disable transparency and check the issue.

  For more information, aero feature please refer to the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Aero-desktop-experience

  Note: If the problem persists, continue with method 3

  Method 3:

  A Malware - scanner The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Please follow the steps below to use the scan to Microsoft Security.

  • Run the scanner from Microsoft from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • Click on download now and click Run.
  • Choose complete system scan and wait for the full analysis.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• BlackBerry Smartphones phone new problem... Please help urgently...

  Hello...

  I really need a help that expert on black berry 9810. I am a new blackberry user by the way. So now the problem is...

  I can't configure my phone because it always came to ask me upgrade my data plan. In addition to this, sound out always asking me to connect to the network while my phone is connected to the network.

  Please help thanks me...!

  Hello ccarthine

  Welcome to the Forums of the BlackBerry Support

  We need BlackBerry data Plan to access most application on our Mobile network / BIS our carrier, a normal data plan will not provide you these features.

  Then, contact your carrier or Wireless service provider to find out if your account is configured with the BIS.

• Big problem blackBerry Smartphones! Please help me.

  I work with my bb bold 9700, I want to make the video, and then my bb shut down! When I put my battery and reset on my bb light only red light about 20 seconds and then nothing, it's always turns off. I can't turn on my bb!  20 sec red light does not blink and after my bb turn. Please help me? do you know what is a problem?

  First, try it this way...

  With the BlackBerry device under voltage, remove the battery for about five minutes, and then reinsert the battery to restart.

• MuseJSAssert:Error calls the function selection: TypeError: cannot get the "init" reference to undefined property or no, I am a beginner and not able to solve this problem with my website, please help...

  Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.

  

  I did take all measures please help.

  Hello

  Can try you it on another browser that the problem does not come up on top of our end.?

  Kind regards

  Akshay

• I have a problem in my project, please help

  my project does not work correctly I do not know why .when photo supposed to be shown that he stopped .so I tied to show u what I mean so please help me to know what the problem.

  Hello

  Your problem is common. You are not understanding how everything fit together and interact in Captivate.

  You insert a button on this slide. Buttons playback normally until they were clicked by the user.

  Click on the image below to enlarge if necessary.

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Can not activate CS6 because I did not activate it required 7 days [was: Please help]

  I recently bought Creative costume-CS6, however, didn't install/activate within the required 7 days time. This prevents me from a power activate. Any suggestions?

  First launch means exactly that: after installation, during the initial launch of the product to use for the first time.

  Most of the people, install and activate at the same time, so there is no problem with 7 days.

  The period of 7 days is really just a grace period. For example, you may have installed the software without an internet connection. Adobe allows up to a week for activation and you can use the software at this time.

  I tried many many times to activate my software thanks to enter (as shown) product code, but it says that it is unreconizible or not valid.

  Your real problem seems to be that your serial number is rejected. You really enter the correct serial number? The serial number is not the product code.

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  If you enter definitively the correct number and then contact Adobe for sorting

  http://helpx.Adobe.com/au/contact.html

• X 200 problems with MS office Please help!

  Hello

  I tried the demo version of MS office teacher on my computer when my computer completely froze and I had to use the power button to restart. After I did that I couldn't use my Outlook he said to fix it using. PST. I tried and tried I couldn't fix or even find.

  I purchased Office Ultimate through my student website and now I installed it last night. I went to use Outlook and it still gives me the same error message that I need to repair it with PSTSCAN. I uninstalled and reinstalled again and I still can not use Outlook. I went to the MS site to see if there is a problem, and I can't always find something. I can't even call customer service without having charged $50 to talk to someone.

  I installed Thunderbird to get me by until I can find that hopfully, however, I would perfer to use Outlook. If there is someone who can I would greatly appreciate your time.

  Hudson

  I finally thought to her, I couldn't locate the Office\Office.pst file that needed repaired. I finally spotted after research on and off these days. I used the inbox repair tool scanpst.exe to repair the damaged file. The oulook file has been altered after that I had to use the power button after that my computer froze. Everything works fine now.

  Thanks for the posts.

• Trying to access the files on an external drive. It is denied. Some files are accessable. / problem solved. But please help me learn.

  Hello.

  I use XP Home 32-bit Edition. My a-external hard drive is a Western Digital My Book Essential 1.5 Tb USB2 HARD drive: model number: WDBAAF0015HBK-00.

  I can't access all files on the external hard drive. Currently, I mounted it on a folder. I have some files tif on the external hard drive and wanted to access my photos.

  The message that I had to right click and select open with was "access to C:\(Folder tree) denied." I tried my programs and the Windows Picture and Fax Viewer of image editing. Nothing works.

  When I right click on the images of problem the only options I have are: open, print, edit, Preview, open with, send to. None of these work.

  Some files are not accessible, and others. Unaccessable files do not have a preview image in the window pane (on the lower left side when I'm in the folder).

  This can happen if I didn't 'delete safetly' external hard drive or there was a Brown out? Some of the tif are too long file extensions? Shouldn't windows warn me too long file extensions?

  I consulted the havn't the reader for a while.

  I can not drag and drop the files to my desktop. I can't copy, cut, delete or move the files. When I click on a file, and then click file - properties: nothing shows up and he says: size: 0 bytes, size on disk: 0 bytes. But when I click on the file in the folder, it says that it is 23.3 MB. I can move the folder on my desktop.

  When I select all the files and click on file - properties: it is said attributes: read-only and hidden. They are green in box, I have not did those and it does not work. I clicked on Advanced Options, again I had unstapled the ReadOnly and hidden, then I unchecked all 4 options because they were greenboxed too. It's green boxes, not the check marks in both situations. What are the green boxes?

  ______________________________________________________

  Fixed a problem. I dragged and deposited the files on my desktop and I can access it. At this point, I just thought, since I had problems with the music files (mp3 or wav) is too long and is not be able to access or remove them, but I can delete the folders to get rid of them.

  So my question is why am I unable to access the files? This is a limitation of my external hard drive? Can I test or repair? What is this kind of disk with this version of Windows? What is a format? It's NTFS. Computer management indicates that the external drive is healthy.

  It seems that some files are not named as long as others and I could access those. Is there a limit on character/attribution of Tif or all types of files? If so, is it the same? Pourrait - linked to the way in which the external (or internal drive?) is setup in the policies tab? Are each disk different? They seem to be a little more limited than the internal hard drives, but I'm not sure if this is a limitation of the usb2.

  Does anyone know if there is a program or a way to know how many letters or numbers have been used? Microsoft Word and Works a number of words, but Works 9 (I have that) doesn't have a number of letter.

  Contradict you yourself.  At one point, you said:

  > I can not drag and drop the files to my desktop. I can't copy, cut, delete or move the files.
  and then you say:
  > A problem fixed. I dragged and deposited the files on my desktop and I can access it.

  This side, the general approach to access in this case is "Ownership" of these files.
  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  This probably occurred because the files were created on different computers by users with different Secure ID (SID) or you have reinstalled Windows and files were protected to some extent.  Since you are using XP Home Edition, the only way to see the security settings is to start your computer using safe mode and log in as an administrator.  This will give you access to the 'Security' tab when you right-click on a file and select 'Properties' (as described in the article above).  Apart from connecting with Safe Mode, you can use 'Cacls' command from a command prompt window (start-> Run-> "cmd") to view or change permissions on files

  "Cacls": <> http://technet.microsoft.com/en-us/library/bb490872.aspx >

  HTH,
  JW

• Pavilion g6 1311-eq: driver problem... Please help me!

  Hello.. Help, please... I put t have solutions . I have a problem with the video card driver. I tried to do an update to the current version comes from 2011. When I try to install the drivers from this site... exactly from here ... http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-g6-1300-notebook-pc-series/5186808/model ... whose work... It gives me an error like: instalation of failure... Please... I want to update because my games don't work well with the current version of driver.what can do?
  I tried to install the 15.7.1 version of the driver but it show me 7400 series in Device Manager... 7450 not... and does not work

  giulesteanul

  Download the latest driver intel HD

  First uninstall all the driver AMD

  reset

  Uninstall Intel HD

  Reset

  Install the new Intel HD

  reset

  Install the AMD driver

  Reset

• 2360ee dv3 problems... Please help!

  Hello! I use a 2360ee dv3, and I have several problems with it,

  1 -http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/hp-dv3-2360ee-overheating-every-hour-or... (I made another thread, but no body has responded, also I forgot other problems)

  2. because you people forgot to add in support of NX switch in the bios (I install a new one and it's same thing) I had to clean-install win 8 and which lead to all my drivers, services premium (including their serial code) should be deleted (but that's my problem...) anyway, I have not found all the drivers on the Web site! and now switch capable graphics are not running and is so as well the "ati radeon 4300/4500" and the "Intel integrated graphics i3" to run at the same time, creating a screen (laptop) and a virtual screen, causing a lot of things work on the other screen and just because it is already running and it is better to the screen of my laptop on the ati card now when I try to set only, second screen using Fn + f4 screen resolution setting did not work and Yes, infact the Intel card takes him not on the first screen while the ati is the second and the laptop screen is located on the second, now the problem is, definition of the screen for duplicate or second screen will only cause me a long process of trying to make it work again , and when I'm finally wins, if I sleep the laptop, stop, suspend extended or even close the lead, still working on the Intel card boom causing me problems and to cite, I installed the latest drivers from the amd website, I don't want the card Intel running at all, because if you go on the link located at no. 1 I did not describe , but it is the processor that is over heating and I believe that the processor is an apu with a graphic map of the week, and that could add a little heat, also the heat problem I installed pirriform speccy on my father's computer too (also 2360ee dv3 and fun is done: he bought his two years in front of me) and his stuff work at about 50-50-55-40 (card mother-CPU-gpu-hdd) and while typing this , mine are 78-76 - 79--(n'apparaissant ne pas)!

  3 - the battery shows "plugged in, not charging", but is going up slowly, what is the problem?

  4-i set the battery to high performance, something more than that and I'm back in the days of my old laptop ram of 1 GB acer "m celerion! I know that the setting are just for sleeping and other things but how can alter performance?

  and please focus on the No. 2 most, thank you!

  I could not yet test the process below, but it may be worth trying in your case.  Minecraft is a set of OpenGL, so it won't use the default AMD card.  See this document for more information about the systems of switchable graphics of AMD and OpenGL.

  http://h30434.www3.HP.com/T5/notebook-display-and-video-e-g-Windows-8/How-to-install-AMD-beta-drivers-get-OpenGL-working-without-a/m-p/2652867/highlight/true#M67435

  As you said, it works in "windowed mode".  With this in mind, you could try the workaround suggested or leave such what because it works to a certain extent.

• Problems of HP laptop please help!

  OK, so I have a Hp laptop and it has windows Vista installed. I had this problem where my laptop just won't start all the way and I don't know what to do. It lights up then goes to a loading screen of Hp and then after that it goes directly to a black screen and nothing else happens. I tried to put it on the safe mode and whenever I press f11 to recover my system it sends me to a black screen and the same thing happens. Can someone help me or know what's happening?

  Hello

  F11 is the key you press on start to start the boot from the recovery Partition HP process.

  It is not a process of recovery of Microsoft.

  If nothing else the HP Logo appears on the screen and the recovery to factory settings will not start, it seems that you have a hardware problem.

  For problems with this, you will need to contact HP or ask in the HP Support Forums.

  HP support:

  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1369549728697.876444892.199480143

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  HP Support Forums:

  http://h30434.www3.HP.com/

  See you soon.

• G62 b31ee I need to activate the ahci on my laptop please help

  Essentially I would like someone to change (or teach me how to change) my BIOS so that I can activate the hidden options and so tell - activate the AHCI.

  Hello:

  There is no way to do what you want.

  AHCI is enabled by default, and there is absolutely no way to change this.

  If you want to install Windows XP, then you should read the guide at the link below, read the Intel section and then read the downloadable document to integrate all drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758