My Ipod will not hold charge does it repair Apple?

My Ipod touch 6 Genesis is less than one year old and for several months has not held a 5-10 minute repair charge more Apple does free of charge because it is the failure of the devices?

They could. We are just fellow users, so we do not know with certainty that Apple will or will not do. But I would like to make an appointment at your local apple store or service provider approved and have them check... probably sooner rather than later so you don't accidentally miss this window 1 year

Tags: iPod

Similar Questions

  • my phone has port and new battery and still will not hold a charge

    my phone has port and new battery and still will not hold a charge

    What do you mean 'there port and new battery? If someone other than Apple has opened and replaced the things, it is now unbearable.

  • My macbook pro battery will not hold a charge

    My macbook pro battery will not hold a charge. I took in an Apple reseller and claimed him install a new battery. He said that my battery was still good. I asked him to install a new battery just to have a brand new machine. With the new battery installed, the computer still will not hold a charge for very long. I got the Apple dealer and he ran several tests without conclusive results. I always have a laptop that will not hold a charge and must be connected to use for any period of time. Can anyone offer a solution? Thank you.

    Try a reset of the SCM.  System sometimes forget the management of his own material. Reset the management system (SCM) controller on your Mac - Apple Support

  • ages 7 months and a battery that will not hold a charge for at least 10 minutes

    My HP pavilion Entertainment PC is 7 months old and a battery that will not hold a charge for at least 10 minutes.  In addition, the battery icon says "fully charged, do you replace battery.»

    With batteries which cost $129, I'm a little ticked off.  I can't find information - anywhere on this site!

    The guarantee covers a dead battery?

    I bought 5 HP because of their excellent warranty.  But this, honesty, will be my last, if the battery is not covered.

    Thanks in advance for the advice and guidance!

    Wow, awesome!  Thank you very much!  The only thing you could have said or done was better deliever the new battery!

  • HP ENVY dv6z-7200 CTO Notebook: laptop will not be charged and will turn off when disconnected

    I noticed yesterday when my laptop has suddenly been shut down 64% autonomy when I forgot to plug it in and now it will not be charged. And when its unplugged it shuts down.   I check my settings and there are still immutable.

    Please help me.

    Hello

    This is a technical director of the machine therefore no available records. Please get the part number on the battery and the HP Store or stores order online like Amazon, eBay...

    Another option: use the following instructions to find the product id of your machine, and then use it to search for available baterry:

    http://support.HP.com/us-en/document/c00033108

    Kind regards.

  • the .xml file will not hold the new version I am writing on the 'AIR for iOS settings' window on Flash cc 2015

    Hello

    I need to download a new version of my app on iOS, but the .xml file will not hold the new version I am writing on the 'AIR for iOS settings' window on Flash cc 2015. It keeps appearing as:

    <? XML version = "1.0".

    also when I try to download the new .ipa on iTunes Connect with the Application Loader, I get this message:

    "" "ERROR-ITMS-4238:"redundant binary Upload. " «"" "" There is already a binary download with release ' 1.0.0' train ' 1.0.0 ' "at SoftwareAssets/PreReleaseSoftwareAsset»»»

    The problem is not of Application Loader or iTunes Connect as when I open again the .fla and check the window 'AIR for iOS parameters' he continues to display the 1.0 version over and over again. If Flash isn't that save the .xml file.

    And it happens with all my other apps Android or iOS, old and new versions, all appear as <? XML version is "1.0" on the .xml file.

    Is anyone know how can I solve this problem?

    Thank you.

    There are two different values, the build number and version number. If you use a test flight, you can submit an update without obtaining a review by increasing the build number. If you are submitting an update to an application in iTunesConnect, you must increment the version number.

  • iPod will not charge with new computers

    I just got a new laptop (Windows 7).  I also have a desktop computer (Windows 8).

    My old iPod used to load with my previous laptop (also Windows 7).

    But it will not charge the new laptop with me.  I downloaded the latest version of iTunes on my new laptop.

    He still will not load.

    I tried with my desktop computer (Windows 8) but that does not charge the iPod either.

    I tried with my old laptop (windows 7) and it loads DID.  I can't keep my old laptop.

    An ideas?

    Are you just having a problem with the "load"?  If the iPod appears in iTunes when connected, try the following as a test.  Go to the screen of the iPod settings in iTunes.  Look for the setting (a check box) to allow the use of the disk.  If currently, this option is NOT checked, check it and click apply.  With disk use enabled, does make a difference to the number of cost?

    What type of iPod shuffle you have?  There are four models of shuffle.  This web page presents all the iPod models

    http://www.EveryMac.com/systems/Apple/iPod/index-iPod-specs.html

  • Satellite A60 - Battery will not hold a charge

    Recently, my A60 Satellite 1 years stopped to load completely. If connected to the power supply, it works fine, but the battery not hold a charge at all and register under the 0% charged. Therefore impossible to use the 'portable' unless it is connected to the power supply. It was working fine, then suddenly one day stopped working!

    Does anyone else have this problem? Any ideas on what we can do? (preferably without replacing the batteries - a little more than a way of years out of warranty of course)

    Thank you

    Mike

    Hello

    This looks like a dead battery. The fact is that you can charge the battery about 500 times. After this period, the battery is dead or loose performance immediately.
    I think that the only chance to solve this problem is to replace the battery.

  • IPOD will not start power over

    My ipod touch will not start after as I hold down the power button / stop for 10 seconds; other on my ipod touch for 10 seconds, at the same time & release button with no luck.

    Any other way to get the iPod touch to start or turn it on?   Who sets the ipod touch?  A centre of repair or store for ipod touch?   What are the costs of repair.

    Try the remaining shares of:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

  • Old iPod will not be displayed in iTunes

    I found my first iPod. Not even sure what year I got it but I'm guessing 12 years ago...

    It loads when I connect it to the computer and it works like a charm but it will not be displayed in iTunes.

    iTunes had to have 1 million edits since my last played iPod, but does anyone have any idea if I can make iTunes recognize it if I can change the songs in?

    It is the same for a first generation iPod mini. Fresh big through the wall and the computer, play a lot but iTunes wants nothing to do with it.

    Any suggestions?

    Thank you

    Sophie

    Hi Sophie...



    "it will not be displayed in iTunes..."

    Your profile suggests that your Mac is running v10.10.3. If this is the case, update your OS X software and iTunes can help.

    The OS X 10.10.5 and iTunes 12.3.3 implemented to date are available.

    Disconnect the iPod before installing updates.

    Click on your Apple  top left of your screen.

    In the drop-down menu, click on about this Mac

    Make sure the " view " tab is selected, and then click software update.

    Your Mac may restart several times during the update process. That's ok.

    Then plug in your iPod and see if iTunes recognizes it.

  • I phone 5 s will not work reset does not help

    my daughter has a 5s we are vacationing in Spain and she's dead.

    It does not have a manual resent (Home button/sleep key)

    addition of power doesn't help (left in charge all night)

    UST just a white screen

    Try to connect in recovery mode on your computer, which is explained in this article:

    If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

    If you don't have a computer at home, a provider of Apple Store or Apple authorized service next to your place, they will help you.

    Find an Apple authorized service provider

  • The time on my Ipod will not change when its coastline, Wifi disconnects randomly, screen goes green and red and restart full iPod.

    OK so this problem started about two days ago. I noticed that my time was off so I went to settings > General > Date and time. I changed the hour correctly but when I locked it and got out of her for a few minutes, it was always the same when I changed it. For example: this morning, back at the exact time that was at 10:41 20 minutes later, I changed my time and it was still stuck at 10:41 time will work properly if I am constantly on my IPod and do not block. I really need to use the alarm when I wake up every morning! I've tried everything to fix it, but nothing seems to work. Reset my IPod do not even help.

    This issue has also started two days ago. I noticed that the wifi on my IPod touch 5th generation cut off while an application is open, but when I close it then connects back. It is only on my IPod, but not my IPad. It's pretty boring. I also tried to reset my router but it always disconnects.

    The latest happened just yesterday. Again, I've tried my time is correctly set when all of a sudden half top of my screen turns red and turns green half lower. The screen then goes to black and my entire iPod restarts.

    Thank you very much for the help. :-)

    Try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    -Restore factory settings/new iOS device.

    If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

  • iPod will not play songs

    Hey now good people!

    I have an iPod classic, 160 gb. Until very recently, I had no problem with my music playing on it, but now it won't play some songs. What I've done so far:

    -It is a PC brand new that I just built in recent weeks. There win 10 Pro. The OS and iTunes are up-to-date

    -The songs play fine in iTunes

    -J' did a reset of the iPod

    -J' have wiped off the iPod and started fresh

    I just finished wiping and synchronization. The same songs are the ones that still will not play. In addition, I have a couple of new songs, you just bought in the last few days I have to say sometimes the iPod to play twice before the song, it will play.

    I'm really confused as to why this is happening. Anyone encountered this and did you solve it?

    Thank you

    Roseann

    What is the format and bitrate of the songs that will not play?

    Which menu do you use to access it, and have you tried another?

    TT2

  • Dynamic binding will not be rendered, does not connect to the server, CC 2014, 2015 CC

    Hi all

    I tried to contact Adobe support on this issue, but after spending 50 minutes trying to explain to the rep what dynamic link, the cat no longer works, so I am posting this here!

    I'm on a Macbook Pro 2013, OS X 10.10.5 2.4 ghz + 16 GB of RAM and I run out of problems with links dynamics in CC 2014 and 2015 (both fully updated) - it is important to note that it has never worked properly , but in the past a few reboots, revision or import the model in a different way has finally worked.

    In recent weeks, whenever I try to make a model in Media Encoder, it fails to connect to the server of dynamic links - this happens when you add to the queue of EI (it adds the comp, but won't connect, once I hit rendering) or when you import directly from Media Encoder (sometimes he manages to read the project add the model file and then fails to connect).  The error log says "cannot read from source, it can be moved etc.".

    I tried the following:

    Pass all plugins (I don't have that some installed Trapcode plugins and a couple of old plugins of the trial) of '... common library' for the plugin in the application folder.

    Clear cache of AE and me.

    Disable the firewall.

    Test with very basic compositions.

    Reset me.

    Nothing works and make the files without loss of EI (10-200 GB) becomes impractical and blocks until the AE for hours - nobody knows what might help others to reinstall everything (very slow internet connection, could take days).

    I doubt that it is connected, but I also have license issues major since the move to the country and therefore duty cancel my subscription and re-subscribe with a new account (different username etc..).  Half the time the apps that I use (AE, first, Illustrator and Photoshop) will not open, responsible for account Adobe comes constantly, opening and closing. Normally signing off CC and removing the OPM.db file works, but not always.  Need me an average of 20 to 30 minutes to open any application Adobe, and sometimes they just do not open at all.

    I am incredibly frustrated to spend more time trying to AE to work I work in an AE - I don't want to not scream (Why oh why oh why adobe!) to you folk, but I feel like a fool to pay each month for software which opens at all, or that does not work when it does.  I should mention that on my iMac more recent (2015), with exactly the same applications and plugins (but who never had my old account on it) everything works pretty well as it should.

    Suggestions (apart from those you can find forums to research - I tried all MS) would be much appreciated!

    Updated - I think I've fixed it (either by the way it took me ages to find this post, because someone had moved without letting me know, I got so stuck in a loop of browser redirection, as Adobe had allowed me to change my username to that already in use.)  I'm not fan No. 1 Adobe this morning...).

    Three things I tried, one of the last 2 must have worked.

    1. I checked the host file, it was empty, but apparently rogue adobe references often cause this problem.

    2. I checked my installation in the creative menu cloud language - it was strangely grayed out, so I confirmed language than English, this could well have caused the problem that I've used French as the language of installation (I work in English, but teaching in French...).

    3. I think that this might have been what solved the problem - I renamed the folder SLCache (Support HD-Library-Application Adobe) in SLCache.old (effectively removing) then restarted the computer.

    Now the questions link license and dynamic seem to have disappeared, Dynamic Link is very slow, but it has always been.

  • Firefox will not hold, but shows in the Task Manager, after updating graphics drivers from AMD 13.1.

    Hello

    After update for drivers AMD 13.1 on my 5770, Firefox will not launch; It doesn't, however, appears in the Task Manager. I want to emphasize that it will boot into Windows safe mode; When I opened it in safe mode, I used this time to deactivate all plugins, modules, extensions and created a new profile. This did not help. I also tried launching Firefox in its safe mode and had no luck with that either.

    I encountered this problem once before, when trying to upgrade to an earlier version. I think I was moving from 12.1 to 12.4, but I'm not 100% sure of that. In the end, my solution was then to retrograde back to my previous driver. The steps mentioned in the previous paragraph has not helped at that time, not do a complete reinstall.

    experience of 15 years, and that computer repair baffled me.

    Thanks to all those who might be able to help.

    Eventually the relevant specifications.
    Windows 7 Ultimate x 64
    AMD Phenom II x 4
    Ram 6BG
    Chart AMD 5770, running catalyst 13.1

    See here

Maybe you are looking for