My laptop boot sector has failed. Installation DVD creation

Similar Questions

• HP 15-g030so: the selected boot device has failed. Press ENTER to continue

  So, I got a disc error and had to go on my hard drive. After that, I was invited by a certain recovery of hp and tool that fussed around a while and rung me that he could not repair the system and some newspapers were stored. After that I tried to install win 8.1 running from a usb storage device that was the 8.1 software the installer of windows in it. Then the screen went black and I was promtped with "selected boot device failed." Press Enter to continue. "

  Any ideas on how to solve this problem?

  Problemi1 wrote:
  And now we're back to the original problem. I have an official version of windows 8.1 downloaded and formatted to a 8 GB USB by the official program from the official websites of microsoft. And just to clarify, it works with my pc. Now, when I try to start the installation in HP computer, it promots me with "selected boot device failed." Press ENTER to continue"and im the possibility of"boot manager"," Manager "start of the EFI file', who faced the same problem when I try to manually start the device and start"(yep 2 times). "»

  Hello

  Sorry to hear that.

  If you see boot and boot to the EFI file manager but nothing else, the USB is not detected.

  Please, perform the above steps

  s ' ensure that the 8.1 Win USB is intact and working

  -Secure Boot to disable and enable the Legacy mode

  -save changes and continue with the F9 mode.

  

  If it still does not respond, please take screenshots and join them in the next post.

  I hope this helps.

• White screen then the message ' selected boot device has failed.

  After a normal shutdown last night, that my cell phone went straight to a white screen on back when I turned on.

  I tried to plug and unplug, take out the battery and connecting it to a TV with a HDMI which did not pick up anything.

  After turning off the power on and off several times, there is now a white dash in the upper left.

  I let him down for about 20 minutes before a message saying "the selected boot device is a, press ENTER to continue" that turns off the computer.

  I had the computer 4 days if shouldn't them be anything malfunction already.

  Any help would be appreciated!

  GabbyBlag

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on startup problems and wanted to help.

  You should not have problems with a PC this new.
  
  My suggestion is that you contact the HP customer support to see about maintenance and options at your disposal under warranty replacement.  If HP is unable to repair it, then you should be able to insist on a replacement - no charge!
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Installation successful, but a patch has failed (installation of Ae)

  Initial installation was a similar, but different error message. I tried to uninstall completely Ae and then clicked on install from the Cloud app and got this...

  How to fix? Thank you.

  

  Hi Kenny,

  Please see the below help document for error code u43m1d204:

  Error download or update Adobe Creative Cloud applications

  If the update still does not work, try to download the same from the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  * Do not perform very Important *.

  Kind regards

  Sheena

• WDS has failed

  Until a few months ago, I got WDS works well. It has been configured to use PXE and parameters of lite touch. Now, when I try to boot I get "pxe - m0f: boot agent Intel that exists." Selected boot device has failed. Press any key to reboot the system. "It has been set up by someone else who has since evolved and I was responsible for setting. I did a lot of reading on WDS, but seems to have gotten nowhere. Any ideas?

  Please post your request here:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• Installed PS CC (2015) twice on my laptop and got this message each time: Installation successful, but a patch has failed.  Learn more > download appears to be damaged.  Please try again (U43M1D204)?

  Installed PS CC (2015) twice on my laptop and got this message each time: Installation successful, but a patch has failed.  Learn more > download appears to be damaged.  Please try again (U43M1D204)?

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

  U43M1D204 - http://forums.adobe.com/message/4629442#4629442

• NB100-12 has a boot sector Virus

  Hello

  My netbook NB100-12 has seems to have a boot sector virus.
  Basically, it works 10 minutes after startup.

  I tried to reinstall Windows (XP Home Edition) by using the Winnt32 file but every time you start installation I get a blue screen with a STOP: 0x0000007b error message.
  I'm not able to reinstall windows in any other way, because the laptop didn't have the original CD with it, and also it has no CD ROM
  What can I do?

  Thank you
  Daniel

  What?
  Boot sector virus!

  Did you come to this conclusion because the laptop turns off after 10 min of use?

  How about other ideas such as a higher temperature, problem of RAM, etc?
  Usually the laptop would freeze or stop in response because of the higher temperature
  Make sure that the cooling modules are free of dust and make sure that the fans are not blocked during the use of the laptop!

• Need to download the iso of Windows installation DVD or usb 7.1 when booting via the BIOS

  Original title: ISO WINDOWS 7.1

  My hard drive has failed on a Toshiba laptop.  I installed a new drive and now need to reinstall Windows 7.1 I purchased pre-installed on the laptop, which was not supplied with a recovery disk or an installation disc.

  I need to download the iso of Windows installation DVD or usb 7.1 when started by the BIOS.

  My office uses Vista, and it seems to have a built-in code that prevents a download.  Where should I go from here?

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• We found no boot disk or startup disk has failed?

  OK, so yesterday my wireless mouse is broken, I restart my computer to get it to work again. When I did, it has not fixed my problem, so I went online to see some solutions. When I went on a secure site, I got an alert on my computer and something about 2 programs being completed. It seemed was going to turn off the computer, and in a panic, I turn it off. When I turned it back on, it went straight to the verification of the startup disk. And it gives me the message: no boot disk was detected or the startup disk has failed. I got it a couple of times before and all I ha do turn off two or three times, and he'd turn out normally. It won't work, and I tried several ways to remedy. I clicked on F2 and F8 a F11, but nothing works, and I do not have a cd with media recovery settings. Any help would be appreciated.

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  Turn on your computer and immediately start typing the appropriate key 'F' to run the hardware diagnostics or system on your computer. Then, run the hard drive test and report the results. If the hard drive has failed or is about to fail, you may need to replace the hard drive. If the hard drive is reported as 'OK', the boot sector, or the hard drive was damaged and the operating system must be repaired or reinstalled.

  You may need to use your HP recovery disks to solve each problem above. If you create your personal series of HP, as suggested by HP recovery disks when you configure your computer... you will need to order a series.

  Please send BRAVO

• "The Dell Dock language file, which is necessary for its operation, has failed to load. Please check your Dell Dock installation"

  Original title: Dell Dock

  Get a message saying: 'the Dell Dock language file, which is necessary for its operation, has failed to load. Please check your Dell Dock installation

  Try this for the restoration of the system to Vista before the problem:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.DellDock.com/

  Above is the link for redownload for him, if necessary.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Contact the Dell Support link re problems with their software above.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to install vista 64-bit sp2, his show Installation has failed.

  his show Installation has failed.

  Hi manjunathak,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts and try to install the updates.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the Microsoft article mentioned below and check if it solves the problem:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  For reference:

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?

  I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?

  Hi John,.

  I'm unable to install the second copy LR6. I get the windows with the message that I've exceeded the number of licenses.

  I did the following:

  On the desktop computer:

  I registered

  Uninstalled LR

  Re-installed LR

  On laptop:

  I registered

  Uninstalled LR

  Re-installed LR

  What's wrong?

  Concerning

  Dieter Kolonko

  Von: John T Smith

  Gesendet: Mittwoch, 19. Juni 2015 21:02

  Year: Kolonko Dieter

  Vacancies: I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?

  I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?

  created by John T Smith https://forums.adobe.com/people/JohnTSmith > in download, full installation, commissioning - see the discussion of https://forums.adobe.com/message/7667228#7667228>

• Only UEFI won't boot Windows Installation DVD

  As you can see on my subject matter, my phone W520 won't boot from my Windows 7 Installation DVD when it is set to UEFI mode only. I get no error or anything, just the screen goes black for a second and go back to the Start Menu and when I select the DVD player. For what it's worth, my hard drive is already partitioned GPT, and I need to repair the installation.

  Before you ask for help, I just want to mention that I created this particular Installation DVD of Windows 7 using the all-in-one tutorial that I have 32-bit and 64 - bit options all on the same disc. The drive starts very well in boot mode "Legacy/UEFI", so I don't know what the problem is. Someone saw this?

  EDIT: I followed this tutorial: http://www.insanelymac.com/forum/index.php?showtopic=186440 and I'm in step 14.

  
  

• message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

  I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

  Hi vlademer,

  D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• ENVY 20-d010t: "ERROR: no boot disk was detected or the disc has failed." On HP Envy 20

  Hello-

  I have a 20 WANT all-in-One PC and until yesterday it was working fine. When I turned on my PC, a black screen appears with the message: "ERROR: no boot disk was detected or the disc has failed." I followed the instructions on this post and ran a Test drive in the BIOS. I ran both the Quick Check and balance of large and both have been adopted. I don't know what to do now. All solutions?

  Thank you

  mgmartinelli

  Future viewers of this post.

  I took my PC to the Geek Squad at my local Best Buy store and it turns out that Windows was just corrupted. All you have to do is to do a full restore using recovery discs. For more information about your model, I would just search on the internet.