My music is, but I can not play on my e260

That's what I was doing. My e260 is stuck so I downloaded something about, I found on the web, updated)
( http://www.sandisk.com/Assets/File/D...fw01.00.12.exe). Yes, a former.

The refreshing problem has been resolved, BUT I can't play my music. My computer says that the memory of my e260 is almost full (also said it on the info on the sansa), with all my music I had before I downloaded this version (E:\MUSIC), but I just like artist 3, I had more than 100. I can play on rapsody, I can get if I open the 'Music' folder on my sansa, but the music does not appear ON the drive on the sansa software.

I used differet improvements I found and nothing, it is the same, no music.

What can I do? Please help me, my appeared at my job is bored super.

Please, I beg you.

To see the music on your computer, go to settings/USB Mode and change mode. You can see the music which has been transferred in a mode both - MTP or MSC, not both. It's just for your computer - it should appear on the Sansa.

Search for your music into the unknown. There may be bad ID3 tags. Here is the ID3 tags.

Tags: SanDisk Sansa

Similar Questions

  • Multisession CD burning, but I can not play!

    I like to burn my music on CD and often use the option 'multisession' during their combustion. The only problem is, I can't play!

    Danaford Hey! This happened to me before too until I had a tip from my friend. When you create a Multisession CD and it is not finalized, then you will not be able to play on your CD player at home or in your car. Try to use a 'track at once, do not finalize Session' to copy some of the tracks in a single session. When you are finished with the CD, select the option 'Track at once, Finalize CD' to close the CD. If a CD of recoredable is not closed, it cannot be played on a CD player.

  • Installed the Flash Player 10.1, but still can not play games on Facebook.

    I recently tried to install the new flash player 10.1 with the same error message could not be saved.  I think that I tried to do it 100 times receive the same error message. I checked that I am the administrator.  I think I finally had installed and was so excited, but when I went to the 'about' page to see if it has been installed there is nothing there.  I went to facebook to play bejeweledI and I see only a blank white page with the Red Cross.  Then the pop up appears asking me to install the latest version of flash player.  I have windows xp, System 32, IE 7.  I've installed shockwave 11 and you can see it in add and remove file and also in the add ons.  However, the only thing I see on Flash player is the Adobe Flash Player 10 plugin but there is nothing under "size" here.  When I go in the c:\windows\system32\macromed\flash folder I see the following files:

    Flash 10h.ocx

    Text to install Flash

    Flash player.xpt

    Flash util10h_activex.exe install/uninstall vs 10.1.53.64

    Flashutil10h_ activex.dll

    Flashutil10h_plugin

    Npswf32.dll shockwave flash 10.1r53

    Install the text

    I also have the plugin Java 1.6.0 21 installed and can be seen in the add ons.  I have Adobe acrobat 7.0 is installed.

    I have Norton SystemWorks 2006 and updated each year.  I hope that's all the information you need.  I have read other threads and have tried everything I can think of, but I have to do something wrong.  Please HELP, I'm going crazy with question!  Thanks in advance...

    Yes!  It worked!  Thank you very much for your help.  I can now play my games on who's who!

  • How to make a slideshow to be used on blu - ray. I MADE A SLIDE SHOW BUT I CAN NOT PLAY ON BLU

    HOW TO MAKE A SLIDESHOW TO BE USED ON BLU - RAY, I MADE A SLIDESHOW IN LIGHTROOM, BUT I CAN ' FIND A WAY FOR BLU - RAY. JIMBUZZ1

    Lightroom creates a DVD that can be played on other computers.  This includes slideshows.  If you want to be able to show your DVD into a Blu - ray or standard DVD player connected to the TV, then you must use a software that will create the DVD in the proper format.  You might consider ProShow Gold, or Adobe Premiere Elements or similar programs.  According to its capabilities and your TV, you might be able to simply display a regular data DVD images.  My TV has an entry for a flash drive.  I can load the images to a flash drive and view them directly.  But if you want to show your slideshow on your TV, you need to author with appropriate software.

  • Question for Microsoft Support; I have a huge amount of music files .m4a that I can not play on Windows Media Player?

    Question for Microsoft Support;
    I have a LARGE amount of files music .m4a in a storage drive stand alone that I downloaded from an old Apple computer have more possession of. I can't understand how to enter these data into my old Emachines computer Windows Vista run the Media Player program. I tried to copy a few files m4a manually in the file Media Player Music folder, but they do not play. I'm not really all that computer savvy and know only the basics, I need to use my computer really. Can you give me some step by step instructions how to get these converted files or whatever it is I need to do to get them to play and to integrate properly into my library if it is possible? If this isn't the case, I'll have to go out and buy a new Apple computer for my 60 GB music collection. In the past, that I've never had no real problem shooting files to leave this computer based Vista and convert these files to my old computers Apple Itunes Player. So what's the problem with your system of guys that done anyway this such a pain in the butt? I would really like to understand what exactly is happening with this issue? It's very frustrating for me. I'm a finish Carpenter not a computer programmer. Such things should not be so difficult for someone like me to understand. All I intend to buy a really nice computer, probably in the summer and was considering a Microsoft based computer. But if this kind of problem will be spread with Microsoft products, so maybe I should reconsider. help you can offer to alleviate this problem will be greatly appreciated.
    Thank you
    Signed;
    Tim M. from Detroit.

    According to research on the Internet, Windows Media Player, atleast this is version 11 (included in Windows Vista and available for Windows XP SP2 +) cannot play Apple loseless type .m4a audio files without having to install any codecs.

    If you want to use Windows Media Player, you can follow the instructions mentioned here to install the necessary codecs and plugins.

    (In the related instructions above, in the first step talks about codecs - your .m4a files are files Apple loseless then follow the party referred to in the first stage about Apple loseless .m4a)

    Personally, I prefer using alternatives to Windows Media Player rather than installing codec packs.

    If you don't want to install codecs, download no matter what media player from "programs that open. M4A files"- Windows category list on this page.

    If you use a spare player - VLC Media Player is my choice.

  • Can not play my music Via Bluetooth on my system Audio of Nissan Navara Outlaw (2015)

    Hello

    I have connected my Nissan Navara Outlaw (2015) and my iPhone 6 sec more (iOS 9.3.4) via bluetooth. The phone works ok via bluetooth, but audio (although it shows that the bluetooth audio is connected) does not work. I can't play music via bluetooth. I can, however, connect iPhone via USB and it works properly; I can play my music via the USB port.

    Someone has had the same problem, if so, how it was fixed?

    Greetings, Leonce2!

    From my understanding, your iPhone more 6s on iOS 9.3.4 connects to your Nissan via bluetooth, but it will not play sounds. Because this is not how it is supposed to work, I'll be happy to help you.

    Help to connect your iPhone, iPad or iPod touch with your car radio - Here are a few useful steps to ensure that your iPhone and stereo are completely matched. If your iPhone/car played stereo audio via bluetooth before, you can also contact your dealer to see if there are updates of software of bluetooth stereo for your Nissan.

    Take care and thank you for using communities of support from Apple!

  • HP Elitebook 8730w: Eject CD (context menu) doesn't work does not and can not play music CD

    Hello

    After the upgrade to Windows 10 (starting from Windows 7) my CD drive (HL-DT-ST DVDRAM GSA-T50L) does not work properly. I can play the audio files located on the hard disk or over the internet, but I can't play a music CD. Eject the DVD from the context menu fails ("" an error occurred..; ' ").

    The content of the Cd is visible in the file Explorer. I can open and close the CD door manually.

    I get no error in Device Manager ("this device is working properly"). Uninstalling the driver SNA by restarting the computer does not change anathing. The computer indicates that the driver is up-to-date.

    The upgrade to 32-bit Windows 10 has been without any problems.

    Any idea?

    Thank you. LeoEG.

    Finally, the Windows troubleshooting tool solved the problem. It installed a generic audio driver. Thanks for your effort. LeoEG

  • I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

    I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

    Hi gullo56,

    Welcome to Microsoft Answers Community Forums.

    To help you better I would ask,

    a. If it functioned very well under Windows 7 before?

    ·         I suggest you to disable your firewall security software and check if you are able to play the game.

    From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

    1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

    For information about how to run a program in an earlier version of Windows, visit the link below,

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    2. you can also try to reduce the hardware acceleration and check if it solves your problem,

    1. Click Start-> Control Panel-> appearance and personalization.

    2. under customization, click on adjust the screen resolution.

    3. in the display settings dialog box, click the Advanced Settings button.

    4. in the monitor Properties dialog box, click the Troubleshooting tab.

    5. click on the change settings button.

    6. in the Security dialog box, click on continue.

    7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

    8. click on OK.

    9. restart Windows.

    Hope this information helped you.

    Kind regards

    Arona - Microsoft technical support engineer

    --------------------------------------------------------------------------------------

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I went to download songs on my phone from windows media player, but they will not play. How can I play?

    I went to download songs on my phone from windows media player, but they will not play. How can I play?

    Hello

    1. what version of Windows Media Player is installed on the computer?

    2. what happens when you try to play the songs?

    3. do you receive any error messages?

    4. have you already check the manual for the type of files supported by the playback device?

    I suggest you to check if the file format is compatible with the unit for playback.

    Reference:

    Information on the types of media files that supports Windows Media Player

    http://support.Microsoft.com/kb/316992

    (Do not run the FIXIT, close the pop-up window and go through the article for more information on the different types of files supported by Media Player.)

  • Can not play music in Windows Media Center or Windows Media Player

    Original title: Media Center

    I can play is more music in the Media Center or the drive. I can download and burn music, but I can't play anything. I can use I Tunes or Rhapsody to read what I have saved. Any ideas?

    Hi I80Cruiser,

    1. When did you start to question?

    2. what type of files you are trying to read?

    3. what exactly happens when you try to listen to music in the media center or the reader?

    4. you receive an error message or codes?

    You can read the following article and try to rebuild the library which may help to solve the problem:

    You cannot view, add, or delete items in the library of Windows Media Player 11

    http://support.Microsoft.com/kb/925718

    Also check out the links:

    Solve problems in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

    Listen to music in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/listen-to-music-in-Windows-Media-Center

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • can not play torn music and it is not a sound problem

    I ripped a cd in the music file and it will not play gives C00D11B1 error code. It is not my sound I tried Windows Fix - It and that did not work I have a HP Pavilion g7-1222nr Windows 7 Home premium laptop I SRS premium Audio IDT high def audio codec (default)

    I ripped a cd in the music file and it will not play gives C00D11B1 error code. It is not my sound I tried Windows Fix - It and that did not work I have a HP Pavilion g7-1222nr Windows 7 Home premium laptop I SRS premium Audio IDT high def audio codec (default)

    =================================
    The following link might be useful:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    'Acquisition of rights to use music '.

    Component security update - this allows to upgrade page
    the security of your digital media player components so
    You can play the files on your computer
    http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp
    Or...
    http://drmlicense.one.Microsoft.com/crlupdate/en/crlupdate.html

    And... a Google search found the following link...
    It might be worth a visit:

    Proceed at your own risk *.

    How-to-solve: error C00D11B1 when you try to
    play files in Windows Media Player 11 or MuvAudio
    http://audials.com/forum/index.php?page=thread&ThreadId=12485

  • Apparently, the surface has Flash Player but can not play on a site. Help, please!

    Apparently, my Surface installed Flash Player, but my daughter can not play on a site called Friv, which requires Flash player. I have no idea why this might be. apparently you can play friv by changing the compatibility in the tools, but I can't!  All ideas

    Hi Lisa,

    Flash Player is integrated with Internet Explorer in the Windows 8 operating system. As he fails to open certain Web site, refer to the suggestions from the following link and check to see if they help.

    Flash Player help / Flash Player issues. Windows 8

    http://helpx.Adobe.com/Flash-Player/KB/Flash-Player-issues-Windows-8.html

    Hope that the information provided is useful. If you have additional questions, or if this problem persists, come in and we will be happy to help you.

  • Once I downloaded the new version of Adobe Flash Player 11.3.300.262, I can not play games with my friends on Yahoo Messenger.

    It could be a coincidence, but when I upgraded to the latest version of Adobe Flash Player 11.3.300.262 I can not play games with my friends on Yahoo Messenger. I know that when I've updated for a reason that I had to try 3 times before it took. It shows that it is updated. I wonder if I have to uninstall and reinstall. Also, I never use Internet Explorer 8 but when I went there to check I found a plug check link there and it showed over there that Adobe Flash Player necessary update but it was an older version and not a Foxfire had updated me too. Now I'm really confused if it causes a problem. I've never had to control Internet Explorer for plug-ins before. Have always just updated to Foxfire since that's what I use. Adobe Flash Player seems to play videos OK not really sure if this is the issue or not. My Java plug-ins have been very well and have been updated some time there, so I know it's not that. Any help is appreciated. Thank you!

    Hey again,
    After hours of reading and checking to make sure I had good things enabled, I did, I gave up and uninstalled the latest version of Adobe Flash Player, they gave me and re-installed and later I had my friend get on Messenger and we tried games and it worked this time.
    For some strange reason when I updated it took me 3 tries before it took. So even if he told me that it has been installed, apparently it wasn't really. Just goes to show you that you can not trust what you see.
    What has really scratching my head was I went to Internet Explorer 8, which I never use more and discovered you can now get Mozilla plug in slip out there and when I did showed that same Adobe Flash Player is outdated but it was to a different version. Not knowing if it would help, I installed a new too and he said it was his understanding that it does not. So I guess you can have 1 version installed on the computer 1 despite 2 browsers different different versions. It becomes too complicated for me. Laughing out loud!
    I work with computers all the time at work but not the technical stuff. If it's something simple, I can guess through it to help someone but it's my first personal computer for me and is a former first, so I got experience using different types. We use the desk at work as well. Personally, I like computers laptops for various reasons. And the mention of people many browsers go way over my head.
    Please answer this question though and you answer back.
    DFelice

  • Can not play in DOTA on Satellite L510 (i3) with Intel HD graphics card

    Hello

    Can anyone help me regarding the Satellite L510 (core i3)? Can not play in DOTA even if updated the latest display driver (Intel HD Graphics (Core i3) with 8.15.10.2086 version of the driver.) on Intel website, but still can not solve my problem. I tried to reinstall using win7 or vista OS but still the same.
    Someone at - he had to face the same problem with me?

    Thank you.

    Hello

    What s wrong exactly?
    You are not able to start the game?

    You compared the required for the game with the hardware specifications of notebooks?
    Your good enough to play this game material uses better resolution?

  • Satellite A300D - is overheating and can not play games

    Hello
    I'm quite desperate. My Satellite A300D is overheating. I can not play new games. Temperature hit 94 degrees and laptop is restarted. I cleaned it several times, very precisely and nothing. So I decided to send it to the official service of Toshiba. After that, the phone is still the same.

    My only hope is buy cooling grease and cooling stock-base. But before that ideas, advice?

    Thanks for everything...

    Hello

    I can understand you mate, but have you contacted Toshiba service center again? You should speak with the technicians and explain the situation. I put t know what they did, do you know that?

    Cleaning of the laptop is still a good idea but if it doesn't work maybe the thermal compound must be renewed. So ask a technician for help laptop.

    By the way: what OS are you using? You can use the same problem with the factory settings and preinstalled display driver?

Maybe you are looking for