My new B210 goes to sleep and not wake up.

Similar Questions

• E330 beeps two times before going to sleep and not sleeping actually

  Hello

  I have Lenovo E330 with Windows 7 Pro SP1.

  For some reason any my computer sometimes doesn't go to sleep.

  I press the power button (set to go to sleep), the screen goes black, beeps twice.

  and it seems that he fell asleep, but actually fans turned on and the red light ThinkPad remains on (and not fade in & out).

  Help, please

  Izik.

  Hi, Izik

  I would recommend making sure that all the drivers and BIOS are up-to-date for your system. All updates available for your system can be found here. You can use the drop down lists to filter by operating system and type of device. After that all who have been downloaded and installed, try to put the machine to sleep, and then see if the problem persists.

  Good luck

  Adam

• Windows Vista goes to sleep and then wakes up immediately at the login screen

  Original title: sleep function appears just right back to the login screen

  When I use the sleep function on Windows Vista (the switch icon to the left of the lock in the start menu), the system go to the start screen, but a few seconds later, the computer comes back, says "Recovery Windows" and then displays the password login screen.

  I scanned the computer many times for viruses (using McAfee), but found nothing.  Is there a way to tell the computer to sleep and have it actually do?

  -HE'S

  When I use the sleep function on Windows Vista (the switch icon to the left of the lock in the start menu), the system go to the start screen, but a few seconds later, the computer comes back, says "Recovery Windows" and then displays the password login screen.

  I scanned the computer many times for viruses (using McAfee), but found nothing.  Is there a way to tell the computer to sleep and have it actually do?

  -HE'S

  See if the following can help you...
  Start button > Panel > Classic view > Power Options > click on change power settings > click on advanced editing powersettings > scroll down until you see Miltimedia parameters, click the plus sign (+) sign in front of > again once, click the (+) sign sign in front when media sharing > on battery shoud read " allow the computer to sleep ".
                                                   Sector should read " allow the computer to sleep ".
  If they aren't, it must 'prevent the idling to sleep' or 'allow the computer switch to Away mode. Click on it, you should see a pointer on the far right, click on it and select allow the computer to sleep.
  Click OK when finished.

  t-4-2

• A satellite - monitor going to sleep and not signal

  My two monitors won't wake up, why?
  I have the latest version of the BIOS also and Powere options checked. What could be causing the monitors this problem?

  My Fujitsu was working fine the other day and also my HP w22 worked fine before.

  Monitors >
  In the HP w22 Device Manager > the device is working properly

  I have my Fujitsu currently connected

  In the Device Manager > I have listed two boxes: generic Pnp monitor in both cases, she States the device is working properly

  Device type > monitors
  Manafacturer > (Standard monitor types)
  Location > on Mobile Intel(r) 945 Express Chipset Family

  OP VISTA BASIC IE8

  I doubt that s a monitor problem
  Have you updated the display driver? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  And have you tried another cable? Cheap cables are sometimes present problems, so you should exchange it and buy a high quality cable.

  Last but not Lea what Satellite phone you have exactly?

• Computer goes to sleep and won't wake up

  A few days ago my computer started not to wake sleep cycle.  It goes into hibernation and don't wake up with a jerk of the mouse or by pressing the buttons on the keyboard.  I put the display to sleep for 4 hours and 30 minutes, but she falls asleep before 4 hours are rising and then don't wake up upward.  I have to press the button for a few seconds to do to turn off and then restart.  If I press a button on the screen when the computer is in standby it gives me a message that the signal of the computer has been lost.  Anyone has any ideas how to solve this problem?

  Hello

  Look at all the features associated with sleep and ensure that it is only sleeping and not hibernate.

  Some computers sleep mode will not let you wake up mouse etc. You have to push short s to the power Witch (as mentioned above by WillTel).

  It is possible that your computer never before slept and was just to go off the screen.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• When I click on 'File' and then 'new' it keeps open a new file as a layer and not a background. The RGB mode is selected.

  When I click on 'File' and then 'new' it keeps open a new file as a layer and not a background. The RGB mode is selected.

  With the new files to open as a layer and not a background, I'm not able to create multiple layers and it won't let me convert the background layer.

  How what happened. I've used PS yesterday and had no problem. Today, my computer did updates mandatory day and now this.

  Yes. You use the option of Pixel of the Ellipse tool. He's so setting pixels as it is supposed to do without creating a layer.

  Choose the option to the form:

  

  Also the menu layer > new layer creates layers and paper rolled up at the bottom of your layers palette also creates a new layer. I hope these work.

• PlayBook is going to sleep and my data transfer stops

  Hello

  I test my download application and have found that when the playbook goes to sleep the transfer actually stops until the backlight is activated again.

  This is normal and is at - there a way around this so that I can have my app continue to transfer data while the playbook is in standby mode?

  Thank you

  By its design, and apps that really should work differently need to implement specific measures to do this.  Look in the QNXSystemPowerMode things and consider carefully whether you should be giving the user the ability to control it, because some users can expect and want a transfer like this to be suspended, depending on the nature of your application.  For some, to use only THROTTLED, for others something more complex.

  Also note that you want to requestResource() with an argument of QNXSystemResource.NETWORKING and don't forget to release properly when you're done with him also.

• Vista ghoes mode 'sleep' will not 'wake up '.

  Vista starts without a problem.  Without warning the display disappears and I am unable to see anything including the cursor. At first I thought the BONE broke, but now I think it's just going to go to sleep on her own and refusing to "wake up" when I move the mouse.  I tried several diagnostic tools on the computer, but everything seems to be OK.  The first time it happened I was using a projecter and display of powerpoint slides. Is it possible to disable the "sleep" function to see if my theory is correct? Or you have a better idea?

  First option

  It seems that your computer can be set the hibernation mode. The main reason that he would do that automatically would be because your battery level is extremely low. Try plugging your computer or insert a charged battery and release, and then press the power button a times, the computer usually does not work in the movement of the mouse in Hibernation Mode.

  Do not forget that, once the laptop goes into hibernation, you should not interrupt the process by removing the battery until the hard drive and all the other lights stop flashing and power off. Once they have fed completely down (may take a few minutes) you can exchange the batteries safely. To wake up from hibernation, press and release the power (once) button. Function of various factors, your laptop can take 1 to 5 minutes to return to the login screen, although usually, it will be one or two minutes, not five.
  Second option
  If the power is not a problem, but you leave your computer on all using it does not, he can simply go to mode hibernation as part of its power system management. You can change the settings for diagram of power to your needs as follows:

  Place your mouse over the the battery icon on the taskbar and right click.

  Select "Power Options".

  (You can also access power options through the control panel: start > Control Panel > system and Maintenance > Power Options.)

  

  According to the plan used on your computer, click on "Change Plan settings".

  

  Change the settings for sleep and Disply offered as you wish.

  Click on the link "Change advanced power settings" (near the bottom of the window".

  

  Scroll through the list at the entrance to 'Sleep' and expand it. Expand secondary entrances and change the settings as you wish. Look at the rest of the settings on the list as to make the desired changes. Click on 'Ok '.

  
  

  Click "Save".

  If this does not resolve the problem, please let us know.

  Best wishes

  BookwormDragon

• Stand-by in my windows xp goes to sleep and then exit immediately to stand-by

  When I take the Stand By option in the stop menu, my computer goes into Stand By, and then returns immediately. (Off Stand-By).  This just started recently, ideas?

  Hello

  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3. What is the brand and model of the computer?

  Method 1:
  Try the link troubleshooting steps:
  How to solve the problems of hibernation and standby in Windows XP
  http://support.Microsoft.com/kb/907477

  Method 2:
  You can perform a clean boot and check if it helps:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

• HP Vista computer will enter into the 'sleep' and not to wake up?

  The computer will go to sleep while I'm on after about 10 minutes of use, and then, I am not able to wake up.  I have to turn it off and sometimes when I turn back on it will start in safe mode window.  I can't even run my antivirus because the computer did not stay long enough.  I checked the power plan settings and also tried to restore but he fell asleep before finishing.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

• Can't find where to write a new message: everything is different and not easy to use!

  the toolbar or something is very different about the new thunderbird and I can't find an easy to write a new message button.

  So you're missing from the toolbars.

  By pressing the alt key or F10 will be hidden toolbars appear.

  The menu bar select View-Toolbars and relight toolbars missing.
  The Write button is on the e-mail toolbar.

• Everytime I open a new tab, it shows ASK and not google?

  My homepage is set to google, but everytime I open a new tab, it comes as ASK.com, how do I get rid of him and keep google.

  Well, I followed the instructions to the letter, but the second tab always enters the dreaded ASK.

  Anyone has any ideas more

  Sandy

• dv7-4170us mode 'sleep' will not wake up

  I have a dv7-4170us which is out of warranty and a dead battery. I can't the computer to wake from sleep mode.

  I removed the battery, battery cmos, the hard drive and cd-rom drive. Nothing don't wake you this thing!

  The wifi light is orange, the caps lock is flashing. The mute button is not lit.  Digital lock is not a light.

  Nothing, not even a mouse, is plugged into the laptop.

  Processors go really wrong that often, but it happens. Unfortunately, most people have a portable alternative to plug the CPU in a test.  On the other hand, the Systemboards are less Hardy. If you remove the hard drive and try to boot and BIOS complains that there is no operating system, the BIOS has tested the CPU and it is OK. If it not yet come to this...

  If she wakes with a hard reset it is, unfortunately, usually the end of the line.

• Mode 'sleep' do not wake up completely

  When I put a computer in standby mode and try to use it again, I can see the screen is back, but it seems like suspended above the clouds. I need a flashlight to see it. When I turn it off and turn it back on again, then the screen is normal.

  Hello

  Well, if the problem is hardware, you need to work with HP Support or a real computer store (one
  "making his own service in the workshop). You cannot fix the hardware with the software.

  Rob - SpiritX

• Quick Launch button remains constant and every time the computer goes into mode 'sleep' and wake up to the top, it does not close properly.

  Original title: MediaDirect problems

  I have a Dell Studio 1535 under Vista Home premium 32-bit. My computer has Media Direct installed, and lately the Quick Launch button stays on permanently. Whenever I put my computer in mode 'sleep' and then wake him up, I am presented with the problem of my computer being off does not correctly... How can I solve this problem?

  Hello

  1. What are you referring to whn that tell you immediately the Quick Launch button remains on constantly?

  2. are you referring to the Dell docking station?

  You can try to update the graphics card and check if it helps to solve the problem.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also check out the Dell support link to download the drivers:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&cs=555&l=en&s=biz&ServiceTag=&SystemID=STUDIO1535&OS=WLH&OSL=en&CATID=&impid=

  Hope this information is useful.