My new ringtone went after reset

Similar Questions

• Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, please

  Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, please, help

  These can help:

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• After resetting the NVRAM C309a rejected all new cartridges

  How to fix c309a after resetting the NVRAM rejected all new cartridges, for an ox610000fb mistake made semi nvram reset done

  after reboot, asking all the cartridges to replace? help is appreciated.

  Unfortunately, I think that the printer is irredeemably right now especially if you did a reset full semi and still get an alphanumeric message. I have a document that I can link to for you on the error codes alphanumeric on this printer, which I will give you. But at this point, you must call to HP Total Care for assistance. Here is the link to this document.

• Cannot find HP printer after reset printers on Air

  I hope someone here can help or has had the same problem.

  I recently got a new printer wireless HP Envy 5660.  Everything worked find when installing, it finds the printer on the network, and he added with the scan function.  During the last part of the installation, I had battery problems and he stopped (later I realized, it didn't matter because it was for registration and other things that could be done later).

  Since I thought I had to redo the installation, I thought I would start from scratch.  I deleted the printer (who also had the function of scan displays on the screen of the Mac printer) and redone the installation.  Now after installation configurations the password on the printer wireless, it is said that the wireless settings have been saved, but could not find my printer on the network.

  I've searched the forums and I tried everything I could find:
  • Reset the printers on the MAC
  • Restore the default settings of the printer
  • Reinstall the drivers both Apple and HP
  • Restored from a Time Machine backup
  • Turn off the printer, router and computer
  • To repair the hard drive
  • Other stuff I probably forgot

  I can add the printer as an IP printer, but then I do not have the scan of the Mac function.

  I know that it worked perfectly before because when I installed it the first time it was on the Mac with printing and scanning.  To make sure that it wasn't the printer or the network, I went to another Mac and clicked on the button Add Printer printers, and wireless printer has been found on the same network and installed with the scan function.

  If anyone has any idea, please let me know because I really need the scan function.

  It could be something with the change in network or Hello after resetting the printers that does not show the previous printers in the network?

  May be corrupted printer preferences given that you have installed the drivers both Apple and HP. It is not necessary to do both.

  Open the Finder.

  In the Finder menu bar, click go > go to folder

  Now type or copy paste the following text:

  ~/Library/preferences/com. Apple.Print.Add.plist

  Click OK, and then place the com.apple.print.add.plist file in the trash.

  Restart your Mac and your printer to test.

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• Websites displaying incorrectly after reset - Strange bars horizontal across the screen.

  Hi all

  Recently, AVG has updated on my PC. I'm normally on the ball with this stuff and always avoid the add ons auto install tools for search free etc, but this one slipped in front of me. The end result is that whenever I opened a new tab AVG had diverted FF and I was presented with an AVG search page. Trying to get rid of him without success so reset FF.

  Since that some sites (not all) have display problems. Most affected appear to be Ebay and FB. What happens is after the page loads and I scroll through the major part of the page of disappears behind black and grey horizontal bars. It was certainly not like it before delivery to zero so something wrong obviously walk in the settings but I could do with help on which parameters must be twisted re. If this can help I can take a screenshot of the problem and host it.

  In case its relevant I am running Win 7 ultimate 64-bit.

  Thank you very much, Chris

  Because the reset Erases a lot of settings, changes may have done and forgotten a long time ago can be once again. Here are a few thoughts:

  (1) try to disable the use of Firefox hardware acceleration

  When Firefox is not entirely compatible with the driver for your graphics card, there may be seeds of inexplicable display. The standard solution is to fall back to the most basic rendered graphic to see if this can help, especially if the issue cannot be resolved by updating your graphics drivers.

  You can disable hardware acceleration here:

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  That will take effect the next time you exit and restart Firefox.

  (2) disable or remove unnecessary extensions

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, for acts recognized or non-essential, turn off.

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  (3) disable unnecessary plugins

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. For non essential or mystery plugins, change the selector to "activate" to "never activate. Depending on the nature of the plugin, this can help as soon as you reload the tab, or it could take effect only in a new window launched after the change.

  Even if #1 or #2 fix the visible problems, I suggest to complete these three steps.

  Any improvement?

• Cannot add new ringtones for iPhone 6 s

  Hi all

  Try to add new ringtones to iPhone via iTunes 6s.

  I followed this...

  http://www.iphonehacks.com/2015/05/How-to-set-any-song-as-iPhone-ringtone.html

  - and connected via cable to the lightning.

  But when I dragged the new .m4r to the window of ringtones in iTunes on the desktop - it came in was dimmed with no check - it seems that it did not really. And nothing new appears on the phone

  instead of dragging on the tones folder, I usually play the ringtone after what I did to a m4r, this way file, it will automatically to your tone folder in iTunes.

  the ringtone should play in iTunes.

• Restoration of old keychain after resetting the default keychain

  Restoration of old keychain after resetting the default keychain.

  I have "reset my default keychain" in Keychain Access after learning that he was the new version of "first aid" on the update OS X El Capitan.

  He said that a new keychain will be saved by default and moved my old side (but not deleted)

  I want to restore my old bunch who was moved aside but can't seem to find all the information on how to do it.

  Thank you very much

  Elliot

  The old keychain must be in ~/Library/keychains.  Rename the old keychain back to login.keychain.  If you do not know the password for the keychain of old connection then you will not be able to unlock it.  The old login Keychain password is different from the user account password, you'll want to change the corresponding password.

  

• Pre installed apps are missing after reset

  My iPad came with GarageBand, iMovie, Pages, Keynote, and Numbers pre installed. After resetting my iPad these applications had gone and not purchased. Is there a way I can get that back?

  A connect to the App Store with the AppleID and the unit is approved in virtue?

  BTW, apps, part of iLife and iWork, come not pre-installed but are available as a free download on the new features.

• HP pavilion dv7 - 7135sz: beatsaudio does not properly after resetting windows 10

  Hi I have a problem with beats audio, after reset of 10 64-bit windows I can use beats audio control panel, but the changes I made to the equalizer or all settings to make any efect on audio. The problem is I have audio beats but it doesn't work how it should and I can not have improved its how I used to.
  How to solve this problem? Can I reset audio driver somehow?

  pauliusser

  Uninstall the old reboot drver idt

  Install new drivers

  FTP://hpcomllb9.Houston.HP.com/pub/SoftPaq/sp71501-72000/sp71886.exe

  Don't forget the intel HD and nvidia driver

  Unistall the HD to intel and Nvidia driver and reboot

  Install the new Intel driver

  Restart after installation

  Install the new Nvidia drivers

  http://www.GeForce.com/drivers/results/90502

• SensMe Playlist went after update

  The sensme music playlist went after update to 6.0 Marshmallow. Does anyone know how to fix this?

  The music got its new update and Sony has decided to bring back.

  http://www.Xperiablog.NET/2016/03/21/Sony-confirms-why-it-removed-SensMe-from-the-music-app/

• No sound, after reset, flash doesn't install, used to install the sound drivers SoundMax & HDA

  My problems are:

  No sound with Youtube or the laptop itself

  SoundMax will not install either even though I downloaded the audio drivers HDA, he asked.

  Download Flash clogged my SoundMax after factory reset.

  I decided to do a factory reset after Youtube starts to slow down. After reset it (Youtube) sort of worked better

  then the audio has disappeared from the laptop. Drivers SoundMax Audio disappeared (greyed out).

  I downloaded the Audio driver from the Lenovo Web site for my X 31 but install SoundMax wouldn't install because he repeated HDA Audio drivers have not been installed.

  I downloaded from here:

  http://support.Lenovo.com/en_AU/research/hints-or-tips/detail.page?&docid=HT072373

  So I went to the HP website to download the audio drivers HDA, then the SoundMax Audio reappeared and I got the sound on my computer.

  Audio HDA drivers contain a link to the HP Web site (as Lenovo does not have it):

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?cc=us&lang=en&swItem...

  When I downloaded the last Adobe Flash, the Audio SoundMax disappeared again. So for the moment I have Youtube video without sound (and Firefox tells me to download Flash?)

  No sound on IE as well.

  Would appreciate your help. Thank you very much.

  I use:

  ThinkPad X 31 (2673-QU6)
  Based on 2673-N7G

  Win XP Pro 3 with recent updates Service

  Firefox (latest) with the Add-ons

  I have not installed all the motherboard drivers (not that I know of).

  After reading of various scattered discussions on the internet, I have been made aware

  to look in that direction, but don't know what I should look for, so I

  ever undertaken research.

  Thanks for the reply.

• Windows Server 2012 with EFI fails to start after reset of HA

  The purpose of this thread:
  1. a solution, if anyone else has this problem.
  2. If someone has a better knowledge of why this happens or how avoid feel free to explain it please.

  The scenario:

  I was a new analysis a HBA via the Web Client (something I've done many times before in the non-Web client without any problem...) and loses connectivity to the ESXi host. No response from the ESXi at all and I've noticed a GROUP... That's fine for now...

  The biggest problem is that the VM on the failed host installs via HA to my other ESXi in the cluster, each of them has started normally except my 2012 server s. Just the Automatic Startup Repair Wizard has started, and I couldn't do much from there... I tried a few things auto repair, but they could not fill...

  So, I entered the command line tools and ran from diskpart. Discs not presented at all. That's where he hit that I use PVSCSI drivers for my 2012 s server so I was trying to understand how I could inject the command line, but I tried something else first...
  I started the virtual machine on the ISO 2012 server. Tried the option repair, no OS not found to fix, so I chose a new installation and loaded drivers PVSCSI pvscsi-floppy, interrupted the installation and tried the repair option again. He said something like "Continue to start Windows Server 2012" and viola! The VM rebooted successfully and started successfully in the operating system.

  All 3 2012 Server virtual machines on failure that esxi is affected. No Server 2008 or linux where affected machines but they do not use the pilot PVSCSI.

  
  Anyone has a solution alter or maybe an explanation why this happened? This will happen if HA into action on my server 2012 s?

  Is it possible to test or confirm without killing an ESXi host?

  I am running vSphere 5.5 and I don't think that I had this problem with 5.0 or 5.1, but I'm not 100% sure that cause I don't remember no matter which GROUP or another that are running older versions of the failure.

  Hardware version is 9, EFI boot.

  Thank you!

  Finally, I solved this... Looks like a mistake to the EFI initialization after reset of a HA. I know EFI is not supported by FT but I'm only using HA I can't find anywhere that it says that it should not work.

  This is how I fixed the corrupt WS2012 boots:

  1 boot WS2012 ISO, select new installation, load drivers PVSCSI, interrupt installation and choose repair. (Only needed if PVSCI-pilot helps you bootdisk)
  2. choose Help and then command Promt
  3. Run diskpart
  flight type list
  Locate the number of the partition-small FAT32 EFI, in my case nr 3
  Salt type flight 3

  type assign

  flight type list

  Choose the letter assigned, in my case E:
  Type exit

  4 cd /d e:\efi\microsoft\boot

  5 ren BCD BCD.bak

  6 bcdboot c:\windows/l en-us/s E: /f ALL

  7 bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Don't know if all these are necessary... However, it works. Note that the scanos and rebuildbcd show 0 found BONES.

  8 exit the command prompt and click on "Continue starting the server 2012" after that recharge should work properly again.

• waitForUpdates method does not detect updates after reset of the connection

  Hello

  In my case, I use waitForUpdates() method to detect the VMotions (. i.e. whenever a VMotion arrived I have trying the GET the update using this method). It works perfectly in case of normal use.

  But all of a sudden after a reset of VC connection. This waitForUpdates() method makes me not updated.

  When the session id gets modified waitForUpdates (propertyCollector, version) would also have a new propertyCollector object (to give you the new collector of property obtained with the new connection object), so even now why it does not return me the updates after the reset of the connection.

  Please let me know if I'm doing something wrong in the treatment of this.

  Please let me know how to handle the connection reset and collect updates later.  Which can affect the waitForupdates in updates outside the collector property object to return.

  I even tried with the checkForUpdates method was the same behavior.

  Thanks in advance.

  Please check if you create the PropertyFilter after reset connection. Good initialization of the filter property should solve your problem.

  Thank you

  Aditya