My NOR cDAQ-9191 is over the display of the module installed in MAX.

Similar Questions

• My Windows Media Player does not open upward when you click it in the list of available programs, nor will any media over the internet using Windows Media does not work

  My Windows Media does not open upward, when you click on Window Media Player in the list of available programs nor play any internet media using the Media window. I have the 110.6002.18311 version. Any help to fix this problem will be appreciated.

  Hello

  You can try to re register the dll files for windows media player and if it helps fix your problem. To do this, please follow the steps below:
  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. At the command prompt, type the following commands and press ENTER after each command:
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wmp.dll

• How can I find a list of the modules installed in FF5? (the one I'm looking for is installed, but does not appear in the Extensions, appearance or Plugins)

  I installed an add-on that would allow me to change the content of the context menu. It works like a charm and I want to make a donation to the person who developed it, but I don't remember his name and I don't know how to find a list of the Add-ons I have installed. I checked the lists that appear when you go to the Add-ons under appearance and Plugins, Extensions Manager, but he's not here. Any help would be much appreciated.

  A lot of extensions change several context menus.

  The Menu Editor extension allows to rearrange and hide items in the menus, even move items between menus (be careful with moving between menus.

  You can get a list of your Extensions in a playlist by help > troubleshooting or typing information on: support in the bar of addresses in Firefox 4 and above. Note that your extensions disabled your addons list may appear after those who have been activated.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• cDAQ 9191 and neither 9215

  CDAQ 9191 or NI 9215 there a fpga module that we can program?

  Is it possible to perform mathematical operations with the signals that we gain by using cdaq 9191 and NI 9215?

  Once the 9191 is set up in MAX, you can read the channels on the 9215 and do what you want with the data.  The 9191 is used only to transmit data from the 9215 on a computer that is running LabVIEW, where you can perform mathematical operations.

  If you want or need FPGA, you get a compact chassis of RIO, not a compactDAQ chassis.

• MAX does not detect the module

  I am part of a team of the FRC and putting in place a Board very easy test to use to test the components.

  I try to use a cDAQ-9171 therefor, with the modules normal FRC - 9201 analog, 9403 for digital and 9472 solenoid.

  When I connect the cDAQ to the computer, MAX detects it and displays it in the tree view on the left. However, when I insert a module (9403), it does not detect it.

  I can do a device simulated, and a simulated inside that module and which works very well. But of course that accomplishes nothing.

  Any ideas? I tried Googling this problem, but I guess that my research skills need work because I found nothing.

  Hi NeatNit

  You're right, DSM is irrelevant in this case.

  I forgot to ask - it's just 9403 module which is not detected or none of them are actually?

  Kind regards

• Problem of discovery of the cDAQ-9191 in MAX

  I have a new cDAQ-9191 with 9208 module that I have connected to my PC with an Ethernet cable.  I use DAQmx 15.1.1 in Windows 7 Pro SP1 64 bit and MAX 15.0.0f0.  The cDAQ-9191 appears under devices and Interfaces > network devices.  There is no IP address and its status is "disconnected".  There is no found network card.  There is no Firmware button, and add device only returns an error message.  See the two photos attached for details of 9191 properties.  I have tried to reset MAX configuration, restart the 9191, exchanging several cables, restart the PC, turn off all the other networks of PC, turning the firewall, but without success.  I searched the forum, but no one else has reported a solution to a similar problem.  The port LAN PC has a static address, and I've used the port to connect to other devices.  As this is obviously not a normal state for this 9191 I'm totally stuck with no idea how to proceed.  Is it a hardware failure?

  In addition, on my main PC (MAX 15.0.0f0, DAQmx 15.1.1, 15.0 IMAQdx, win 10 Pro 64-bit), MAX cannot find network devices.  I tried with an Axis Network camera and the 9191, which both appear on the other PC.  I can't find a solution to either but it's a real pain that MAX is not working properly when necessary.

  Hi Dr_M,

  If your LAN port has a static IP address, it must run a DHCP server, which can affect the 9191 an address on the same subnet.  If no DHCP server is found, the 9191 a local IP address of the default link.  Very likely, you met the latter, and the static IP address that you have assigned to your LAN port does not link local beach.  This means that your computer and your cDAQ are on different subnets, so MAX can communicate with the 9191.

  You can change the IP address of your LAN port to one in the local area connection (169.254.x.x, subnet mask 255.255.0.0), or you can configure your LAN port to automatically obtain an IP address.

  Once you access the 9191 in MAX, you can adjust the parameters IP back at your convenience, as long as the chassis and the computer you end up on the same subnet.

• Why the mouse is hovered over the taskbar only display the date sometimes?

  As right now while I am on this site when I move my mouse over the taskbar, the date does not appear. But most of the time this feature works exactly as it should.

  So why it still does not work?

  And does anyone get off these darn malware or reinstall Windows roads! I sure Ain 'goin' t' we. Just read my about me.

  Thanks John. I'm going a few more mindful of that and try to give some useful information. At the moment it displays the date very well when hovered, but I realized that this problem seems to come and go.

• How to speed up loop DAQ triggered using NOR cDAQ-9174 with NOR-9215 and NOR-9402

  Hello

  I use LV2010 and NOR-DAQmx 9.2.2. I have a NOR cDAQ-9174 with a NEITHER-9215 4 channel 100 k simultaneous ADC and NOR-9402 4 channel DIO module trigger and reset.

  We run WinXP sp3 on a Dell M4400 core 2 duo @2. 26 Ghz.

  I used the code example NI DAQmx for acquisition of tension with trigger HW. My goal is to try all 4 channels on the 9215 simultaneously when a trigger is received on channel 0 of the 9402, after data is read, I use channel 1 on the 9402 to reset the trigger of the target material.  I have a version of this work, however the maximum event rate is ~ 16/second. I have the Setup 9215 for finite samples / 10 samples per channel which is ~ 400uSec of conversion time and I realize he is above in the appeal of vi, but ~ 50mSeconds worth?

  The target detector can put out up to 1 k / event triggers / seconds.  Only, I received a rate of 8 per second and I added the NOR-DAQmx control vi driver and chose "commit" this did double the rate.

  My question is what is the maximum rate of loop for these devices (trigger/conversion/reading device / reset) and start over? I noticed that just let free the 9215, carried out using the 'Acq & chart internal strain Clk' raised only the rate of events up to 20 Hz.

  Thank you

  normbo663

  Hi normbo663,

  You can get this works far better assuming you have an available counter (there are 4 on the backplane of the 9174).

  DAQ Compact supports the tasks of meter output "redeclenchables" that can be used to generate a finite pulse train.  You can set a task of finished meter redeclenchables output to be used as sample for your task of analog clock.  The task of the meter output will be re-Army (less than 12, 5-25 ns) as soon as it's finished out the last pulse.  The task of analog input would be configured to run continuously, but it would only sample based on the output of the meter triggered.  For an example, see here.

  You can reference the internal counters on the cDAQ without signals through a routing module using: cDAQ1/_ctr0 (right click on the chain counter control, then select i/o name of filtering and check channels internal to add these options to the drop down).

  Thus, with the tips above, you should be able to immediately re - arming your analog acquisition on the 9215 using one background basket counters.  It seems that the second half of the application is to use a second channel on the 9402 to reset the trigger of your DUT.  You can deterministically generate this signal so by configuring a 2nd redeclenchables meter out task (single pulse, but this time).  All you need to do is the initial delay on the appropriate value for your analog acquisition.  Trigger this counter on the same PFI line that trigger you your analog task from.

  Using counters to generate the signals you need in a deterministic way, the loop becomes is no longer a problem (as long as your input buffer does not overflow).  You may need to re-read several triggers at the same time for the loop to keep (for example to read 1000 samples each, which would correspond to 100 triggers 10 samples).

  Best regards

• LaserJet P2055DN - do not print over the network

  Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

  I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

  Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

  Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

• Hovering over the triggers Drop Down Menu event "mouse Leave"

  Hi, if anyone can help with this problem, I would be very grateful.

  I have a tab control changing to another page when the user enters or mouse leaves the tab control. The purpose of this is so that the tab control becomes invisible when colored 'transparent', according to the movement of the user's mouse. This allows the full screen to use to display the video when the menus are not necessary, and menus can be displayed when the user enters into the surface of the tab. There is also a button to lock the menu in place.

  It worked fine until I added a few rings of text to a menu tab. When the user clicks on the drop-down arrow and hovers over the elements, the case of the event as if the mouse has left the tab control, tab resets back to page 1 (white page). I don't want to do it, but I still want to use the drop down menus because they are more concise and more convenient than the alternatives (listboxes, etc.). This does not happen with the buttons and other controls, only with the drop-down menus, AFAIK.

  Can anyone suggest a work around? I chose this method of relaxation because it is less demanding in processor using the mouse move event coordinates to trigger the tabs appear. I need to save so much time processor for video capture possible. I enclose my vi (Labview 2010 32-bit) with the gray tabs so you can see and test the value for yourself.

  I would add one for the event to "Operate the Menu Activation" for the controls of the ring.  This simply fuels a real constant in a shift register in time loop.  In the mouse enter and leave events add a case structure and change the pages only when the value Boolean false.  Ensure that supply the true value in the registry to offset in the mouse leave case also (other cases may use the Default of False if you don't have to string wires in all cases).

  Quick MOD after extraction of the stuff IMAQ, remove also the delay in case of loop Structure, provides it ARE necessary delays.

• My office has changed color and is all over the screen

  Please help me if you can. Suddenly my office is simply not the same, the color changed and graphic design is all over the screen. I tried Aero who did something for you tell the truth, but he said there is always a problem to solve. It is recommended to go online to find the solution.

  Aero helped me 50% of the problem, now I find myself with the other half.

  It's like a sort of shadow on my screen. and my sidebar goes black. I had to delete all my gadgets, I couldn't see anything.

  Thanks in advance for your help.

  Georges.

  Hello
   
  Method 1:
  
  Troubleshoot Windows display the text on the monitor is not readable
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/
   
  Method 2:
  
  Uninstall and reinstall the display drivers and see if that helps.
  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the graphics card, right click on the map
  (d) click on uninstall
  (e) now go to your computer/device manufacturer site,
  Download the updated drivers and install them.
   
  Reference:
  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• My counter top is everything about the place. the upper taskbar is ok. the background is all over the screen.

  My office is irrelevant. the upper taskbar is ok, but inside, we're all over the screen

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://Windows.Microsoft.com/en-AU/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

  See you soon.

  Mick Murphy - Microsoft partner

• Receive several codes error over the last seven days. This means - my computer is dead?

  Would like to inform if my computer is really damaged:

  The following errors are produced

  Error 2-32 in the last 7 days

  Error 11-190 in the last 7 days

  Error 14-1 in the last 7 days

  Error 55 7 during the last 7 days

  Error 102-19 over the last 7 days

  Error 1001-36 in the last 7 days

  This means - my computer is dead?

  Thank you

  Original title: Error Messages

  Hello

  They are very good methods for most Windows troubleshooting performance problems.

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those with Dump in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows backup - Some Confusion over the Date of backup

  I have back up once a week on Removable Drive L:

  When we look at control panel > backup and restore, I see that my last backup was on January 3, 2011, as planned.  I also see that three files have not been saved because backup Windows could not find them.  No problem.

  When I look at the Drive: Explorer > computer > l: However, I don't see that the folder that contains the backup is dated 12/26/2010 under "update."  I remember correctly, is that it is all the time that I turned on my backup to a C: partition on my removable disk L:, probably create this folder on the first backup on removable disk L:

  As time passes, the backup on L: folder should not reflect the date of the last backup?  How can I know that the backup works (see other than the correct data in the control panel > Backup and Restore)?

  Here are the results: right click on the inf file: containing the backup (the file displays the "Save" icon), then the properties > Previous Versions shows no available versions.  Properties > general tab shows the typical parameters of a file; e.g., size of 0 bytes, date of creation, etc.

  Because it is a folder, there are no properties > Details tab.

  Dating back to the control panel > Backup and Restore > manage space, I see that two backups are stored in the inf file: Reader corresponsding for scheduled backups performed two since I have configured backup for this drive.  Everything seems normal.

  On further reflection, it seems that Windows 7 works normally, because the "Date Modified" column in Explorer mode don't not one) that reflects the changes made to existing files in a folder root or additons b) new files/folders in a folder root were made; rather the 'modified date' refers only to the changes that could be made to the properties of the folder root after its creation that is, in terms of sharing, security, etc.

  Since Windows 7, at least, you have no control over the name of the backup that is created and used for the backup folder, and there is (apparently) no exception to the general rule of Windows about how the "Date Modified" column is - at least in the case of backups - it seems that a user is more or less in "trust me". , rely solely on the information available in the control panel > restore and backup to determne if the backup does not work (other than to do a restore of your time immediately after the backup, not a good idea).

  I guess that the preschoolers old like me just feel more comfortable using the Explorer to display the properties for the actual backup file and see the date of creation.

  Maybe a suggestion that might be implemented in next SP?

• RDP vs PCOIP. When to use one over the other?

  I think we'll run into problems of latency coming on WAN. That being said, I have heard PCOIP performance is not good over the WAN?  Why is better RDP over a WAN link?

  The answer to that is a bit tricky...

  The quick answer is that PCoIP is a hitter more than RDP, due to improvements in PCoIP to improve multimedia performance (and unfortunately), but takes a little more bandwidth than an equivalent RDP connection.

  That being said, PCoIP remains most likely your best choice unless you have a real bandwidth restriction. In addition, some devices will NOT connect via PCoIP and will not allow a RDP connection (the client in order for the iPad comes to mind). However, there are exceptions, even to - Wyse allowing an iDevice to client that will connect to view using RDP if you want - but it's not free.

  I've set up several clients with external access using PCoIP and personally, I have not had any problems - PCoIP is good enough, adjusting it according to the available bandwidth, but you will not really know until you try.

  The good news is that it is very easy to change the settings of PCoIP/RDP - the console administrator display, you can specify the Protocol by default and even decide if the users can change it or not. Also the clients, you can allow to change between RDP and PCoIP if they experience performance problems.

  So my final answer is just give it a try and adjust if necessary.