My PC fast blue screen from the start.
I can boot mode without failure, but without networking.
Well, you have provided only some of the requested information, but here is my interpretation.
The news BSOD is good to know.
W22n51.sys file belong to Intel and is a kind of wireless network card driver.
Have you updated or attempted to update the wireless, Intel network drivers on your system lately?
Have you changed your Internet Service Provider (ISP)?
If the system is working properly, what do you think happened to her, since it last worked properly?
Sometimes, after a driver update that went wrong in the Advanced Boot Options menu you can choose:
Last good Configuration known (your most recent settings that worked)
LKGC uses a copy of the registry that XP saved the last time that he initialized successfully. Whenever XP starts successfully, the updated settings of LKGC. Which allows to go back a configuration where some driver update fails and gives you a BSOD (which would be useful in the uh - oh moment after a driver update). It's one of the reasons that the option is there, so you should use it.
Then... you can see how your system works with LKGC and if it boots fine, you need to know what part of the configuration of the adapter Intel wireless driver go haywire and generally, that would mean take a visit on your unspecified system manufacturers WWW site and get the latest version of the drivers for your system not specified.
If you can't understand, then you should go back and make an effort to answer the other questions, then we'll know something on your system and can give you some ideas better.
Tags: Windows
Similar Questions
-
Blue screen at the start of WinSrv2008r2 recovered from the backup of windows virtual machine image
Hello
At first, everything seems fine:
-to create the new virtual machine
-startup disc for instalation of Windows Server 2008 on this VM
-Select "Repair system" and point the backup image file (full backup - made with standard Windows backup tool)
-system recovered successfully.
But then, when the system restart recovered fresh - start start Windows normally - and suddenly it is blue screen with the error 0x0000007b
IMHO, this first initiated boot of the recovered system trying to twist something in the special part of the disc and he cannot (because it's a virtual disk?)
Is it possible to recover the system windows image file system server to virtual classic?
Thanks in advance for all voice :-)
Greetings,
RA
Welcome to the community,
the error message is related to the controller to start the virtual machine, which is different from the original system, and its drivers are not loaded in Windows. What you try, it is to use the free VMware Converter and run the option "Set up the Machine", which should inject the necessary drivers in the virtual machine. Before doing this, please make sure that the Windows 2008 virtual machine has the default "LSI Logic SAS' controller configured in its settings.
André
-
X 200 with ssd OCZ blue screens at the start of the docking station
The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.
The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.
I tried to update the firmware on the ssd using this utility
http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806
The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.
I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.
Any ideas or suggestions are greatly appreciated.
Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.
-
Blue screen after the start of a game
Problem event name - blue screenVersion of the OS - 6.1.7601.2.1.0.768.3ID of locale - 3076BBCode - 116BCP1 - FFFFFA800DCA810BCP2 - FFFFF8800FDB2BA0BCP3 - 0000 0000 0000 0000BCP4 - 0000 0000 0000 0002OS version - 6_1_7601Service Pack - 1_0Product - 768_1Files helping to describe the problem:C:\Windows\MiniDump\061913-88686-01.dmpC:\Users\Lewis Chan\AppData\Local\Temp\WER-108982-0.sysdata.xmlRe a 116."It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".
Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.
As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.If playing with video driver versions did not help, make sure that the box is not overheated.
Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.If so, it could be as simple as dust accumulation and inadequate cooling afterwards.
I download cpu - z and gpu - z (both free) and keep an eye on the video time
For more information, please read this blog
http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/ -
My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM. The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.
Can someone explain what I can do to start? Thank you!
Hello
See the article below which might help you.
You receive an error message "Stop 0x0000000A" in Windows XP
http://support.Microsoft.com/kb/314063 -
How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen. It's happened before and I forgot how to move.
Hello pookprec
.
-
I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor. The cursor does not type. For me, maybe I need to reinstall windows 7 and startup tasks are corrupt. I have my product key genuine for the computer, but no way to get to windows. How to restore windows on a netbook that won't start?
original title: Netbook Windows 7 problemNew computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.
Make an image of the DVD, you can use a program like ISO Recorder to do.
http://alexfeinman.com/If you don't have a Windows 7 DVD to borrow, try to upload a picture:
32 bit
http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISOYou change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg
Utility delete EI.cfg allows you to use a product key
http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-discYou can create a bootable USB stick with the following:
Download Windows 7 USB/DVD tool
http://store.Microsoft.com/help/ISO-toolSkip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
They will give a confirmation ID, enter it
Click next to complete the activation.
Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.
http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/
Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.
Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.
Reactivate the installation, you may also do it by phone:
Activate Windows 7 manually:
1. click on start and in the search for box type: slui.exe 42. press enter on your keyboard
3. Select your country.
4. Select the telephone activation option and brace yourself for a real person. -
Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.
Last month, I had a series of blue screens. The problem points to the files Volsnap.sys or Classpnp.sys.
I have a Dell Precision T3500, running 64-bit Windows 7 Prof. The system is configured with RAID.
Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that. It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.
No idea on how to stop this would be really appreciated! Thank you
Hello
Results verified BlueScreenView WinDBG / DumpCHK.
make these problems worse. Uninstall it and run the removal tool to prevent
remains of troublecausing. The following recommendations to use during the test,
even better all the time.TrendMicro removal tool
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxList of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/------------------------------------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 6.x and 4.8 x
Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.==========================================================
The Bug_Checks were D1 (19 long happened if he should really
do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
Components of Windows, which means something else led in error.1. Uninstall TrendMicro as it has a role - is not enough to just disable
such that it will still load chunks of itself in memory.2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
or other corruption could be at stake. Classpnp.sys is the SCSI class system
dll checking and disk problems will affect the it. Run SFC/scannow, and then
Checkdisk (chkdsk /f r).Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=========================================================
Other troubleshooting methods:
BCCode: D1 0x000000D1
Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or standby extended: "STOP: 0x000000D1".
http://support.Microsoft.com/kb/978982Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
http://support.Microsoft.com/kb/2320550Those 7 other KB Articles are available
http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10--------------------------------------------------
Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
If necessary.Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
-
Blue screen at the end of Windows Update
I have Windows updates the value allowing a manual download and install. Today, when the icon appeared, there were 8 suggested files. I downloaded and the window open during the installation Setup. Approximately 98% of the 8th and last update (Malicious Software Removal Tool if they are installed in the order), I got a blue screen. The machine starts, but the Update icon reappeared, asking to perform the same 8 updates. I know that most of them have already been installed. I really hesitate to install again, especially as others have reported may not even start at all their machines after this batch of updates. What should I do?
Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
The following actions could prevent a mistake like this does not happen:
1 download and install updates for your computer from device drivers [of the manufacturer of the device or computer software download page, not Windows Update!]
2. scan your computer from computer viruses.
3. check your hard disk for errors.Source & more: http://msdn.microsoft.com/en-us/library/ff559023(v=vs.85).aspx
-
reformat and reinstall Windows XP but get the blue screen on the windows configuration page
I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer. How can I make this? I want to give this computer to my grandchildren.
Hello
1. why you try to reinstall Windows XP?
I suggest you to try the steps below and check if they help to resolve the issue.
Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.
a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.
b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.
c. do not choose the option to press R to use the Recovery Console.
d. in the Windows XP licensing agreement, press F8 to accept the license agreement.
e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
f. follow the instructions on the screen to complete the installation.
See the following link for more details on the repair facility:
How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed
Hope this information is useful.
-
computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.
To do this, follow these steps:
1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
5. at the command prompt, type the following command and press ENTER: cd system32
6. type the following command and press ENTER: chkdsk /r /p
7. remove the Windows XP CD in the disc drive.
8. Type exit to restart your computer.Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
-
Blue screen during the installation of windows
I was formatting my laptop, when the new windows (windows xp) is installed and during his stops starting and give a blue screen with the error, and automatically restart and the same breed bluse screen and restart. I tried to open the safe mode, but its revealing windows is not completely installed please pick up again. I tried four times back again with the same problem. Please help me...
Hi AhmadDimassi,
· What is the error it fails with?
Check to see if the following is useful.
Method 1: Unplug non-essential devices from the computer and restart the computer.
Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.
a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.
Method 3: Check drive for errors.
Description of the Windows XP Recovery Console for advanced users
-
PCI.sys blue screen during the installation/repair Windows XP Pro
My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.
Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.
Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!
-
Common blue screen on the computer
Original title: computer blue screening
My computer stayed blue screening from time to time when you turn it on, never during use. After the reset of the computer after the screen blue will be 99% of the time blue screen not a second time and will continue to boot normally without any problems. I use Windows 7 Home Premium x 64 bit.
I made a thread on this before asking for help, here is the link to that:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/blue-screen-of-death-badpoolheader-0x19/11fc965f-d0e2-4868-9607-d08b768808eb.
Here is a link to my onedrive with files minidump for just last month, the system information report and pilot's report:
https://onedrive.live.com/?CID=90043B85A1B58BE1&ID=90043B85A1B58BE1%21106
My computer is unmarked, but the motherboard is one:
ASUS® SABERTOOTH 990FX R2.0 (DDR3, USB3.0, 6 Gb/s, CrossFireX/Sli)
HG
No problem on the new thread, I was just curious.
These 2 were related to corruption pool (memory), probably caused by a driver. Run the Driver Verifier to find the underlying cause.
These accidents were related to the corruption of memory (probably caused by a driver).Please run these tests to check your memory and find which driver is causing the problem.
If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
Since then, it is more likely to be a pilot run everything first.1-Driver Verifier (for full instructions, see our wiki here)
If the auditor does not have the issue we move to it.2-Memtest. (You can learn more about running memtest here)
If you cannot start after you have enabled the auditor reboot in safe modeIn Vista & win 7 (F8)
Co-written by JMH3143.
-
Bose AE2w gives blue screen at the time of the twinning
Hello Experts,
When I try to add the bluetooth headset from Bose AE2w on my laptop (Fujitsu S760 windows 7-32 bit) it gives me a blue screen. The problem is that when pairing the headset via bluetooth, the laptop will be begins searching for updates and it ends with a blue screen. I also tried to install the latest driver for the headset but the end upward with the same question. Any idea, and advises on how to solve this problem?
Hello samira.
Thanks for posting your query in Microsoft Community Forum.
- You did it any significant hardware or change software on the computer before this problem?
- Are you able to connect other Bluetooth devices?
- That you get a blue screen often or is that when you try to connect your Bluetooth headset?
I suggest you try to plug the Bose AE2W headphones on another computer to rule out the possibility of a bad headphone. The steps I mean generally help diagnose the problem with the help of the automated troubleshooters and move you in the right direction to solve the problem.
Method 1:
Run the tool material and devices and check.
Open the hardware and devices Troubleshooter:
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterMethod 2:
To control how your computer with Bluetooth devices pairs follow the steps.
- Open Control Panel by clicking the Start button, then Control Panel.
- In the control panel search box, type Bluetooth, and then click change Bluetooth settings.
- In the Bluetooth settings dialog box, click the Options tab and do one of the following:
Pour rendre make your computer discoverable to Bluetooth devices, select the check box for Allow Bluetooth devices to find this computer. - When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.
- To allow Bluetooth devices to connect to your computer, select the check box for Allow Bluetooth to connect to this computer devices.
To be notified when a Bluetooth device is trying to connect to your computer, select the check box for alert me when a new Bluetooth device wants to connect.
Try to change the settings for the Bluetooth compatible device and check.
Change settings for a Bluetooth compatible device device:
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-deviceYou can also check out the link below for troubleshooting
Method 3:
In addition to the above methods, I suggest you follow the steps in the section: Bluetooth® troubleshooting in the following link:
http://worldwide.Bose.com/ProductSupport/en_US/Web/ae2w/page.html
In addition, if the blue screens are common, please see the following link:
Resolve stop (blue screen) error in Windows 7
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Note: Make sure that you back up the data before proceeding with the disk check.Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
Maybe you are looking for
-
HOW DO WITHOUT LOSING THE UNSORTED BOOKMARKS BOOKMARKS
When I imported my favorites after a system crash all finished in the UNSORTED BOOKMARKS list. When I have the TAGS and put them in them the bookmark remains also in UNSORTED BOOKMARKS. If I delete the bookmark in UNSORTED BOOKMARKS the bookmark in t
-
OfficeJet Pro 8630: Two bac impression
My 8630 Officejet Pro has two bins from the printer. I keep letter size paper in Tray 1 and legal size paper in tray 2. Is there a software driver that will allow me to set the printer to make a distinction between the types of documents to produce
-
I have a win 7 pro SP1 OEM installed on my PC, windows 10 will not activate.
Get the OxC004C003 error message? Any ideas? Thanks Bill
-
The IP address has changed and now not SSH!
Having a strange problem with a sensor of version 4.1... It worked normally. Then I changed its IP address. This includes also change the subnet mask, gateway, access list, etc., but also regeneration of TLS and SSH keys. Now the sensor can ping to t
-
My taskbar has disappeared but the windows sound icon still there and clickable
My taskbar has disappeared but the windows sound icon still there and clickable. Its as if the taskbar is invisible. thoughts?If necessary, I can send a photo