My PC under Windows 8 keeps restarting with an error message

Similar Questions

• Windows keeps stops with the error message NOT driver IRQL less THAN or EQUAL

  Using Windows XP on the desktop. Have spent days trying to solve. Getting the message "new hardware installed" but I did not. Had recent power outages in the region. Also have Norton Security Suite, which recently has been giving me the popups that my RAM is too low, but I seem to have more than enough. Have done a few sessions with chat support online Norton with "recovery" distance as well, but the problem persists. Seems worse at night. I'd appreciate a few tips, like this is to destroy my PC.

  What is your computer brand and model?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  There are better alternatives freeware to Norton for a user running Windows XP.

• I built my computer from scratch, installed Win XP to systems integrators. It starts with Windows, but constantly restarts with a blinking message-"a write operation was attempted to a volume after it was dismantled".

  The computer starts without the OS disc in the drive but then flashes this message and restarts constantly.

  Hi Sys_builder,

  Thanks for posting. Your operating system has already started successfully? If she has, I would say running a repair installation. If he ever started successfully, I guess you have bad media or bad material somewhere. I would check with the manufacturer of the hard drive to see if they have diagnostic utilities.

  I hope this helps! Let us know if you have any questions. Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I repair my windows installer, continues to come up with an error message that windows installer is not installed properly

  what I tried to do is to install the latest version of windows messanger (msn) ive, but im not able to make my windows installer comes back with an error message saying that the windows installer is not installed properly, please some help this starting to do my head in

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip

• I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I've tried everything.

  I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs
  • Firefox crashes or does not - how to fix

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• Windows XP with an error message

  I have Windows XP with an error message The application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. Because I don't know how to fix. Can I upgrade to Windows 7 if it still exists.

    

  Thank you for your time and your efforts in this area

  If you get this error when you start her stockings for an application that is automatically going to start Windows XP, this means that automatically from the app has a problem with his configeration

  You cannot switch to Win7 except if your hardware supports win7, and unless the programs you use will run under win7.

  As a first step, you can run the Upgrad Win7 Counsellor, who will give an indication

  In any case an upgrade from Windows XP to win7 requires a clean install, so you will lose everything on the disk to winxp

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Windows backup will fail with the error code: 2147942402

  Hello

  I'm trying to run a backup on a Windows SBS Server 2008 using Windows Server Backup to an external 2 TB USB hard drive - I chose the backup once and personalized with "activate System Recovery."

  This fails with an error message "the system cannot find the file specified" after having transferred about 28.23 GB of data.

  The Event Viewer error code: 2147942402

  I tried to run the backup to another device (a disk on a PC on a network) and it successfully without any problem which seems to me some kind of problem with the USB key.

  I came across these links: http://support.microsoft.com/kb/979281 and http://support.microsoft.com/kb/976972 - but the server I use does not have a USB Host Controller NVIDIA - instead, there "Intel(r) ICH9 Family USB Universal Host Controller" - so I'm hesitant to try this fix.

  I'll reformat the USB drive to see if that helps...

  Thank you very much

  Adrian

  Hi Adrien,.

  The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us updated on the status of the issue.

• my windows laptop 8 is not start blue screen with an error message

  I have a laptop of Acer windows 8 that won't start - it has one blue screen with an error message and other options that work. I do not have a windows 8 dvd or any other device installation and I cannot restart my factory because I have files that are not backed up so they cannot be deleted. Can someone please?

  Thank you for Madi responded and sorry to see that the issue still persists. I appreciate your efforts to try to resolve the problem.

  Since we tried all possible solutions and you do not have a disc of Windows 8. You must contact the manufacturer of the computer. They will be able to participate in the repair of Windows.

  http://us.Acer.com/AC/en/us/content/support

  If you have problems with Windows in the future, get back to us. We will be happy to help you.

• Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  There is a Microsoft Knowledge base article which sets up a few steps to perform in the computer in order to solve the problem you are experiencing, read the article that you find on the link I am mentioning below and see if it helps the measures mentioned:

  http://support.Microsoft.com/kb/919751

• Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

  Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

  This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

  I want to thank all in advance for your answers.

  Nelson Santiago

  Hi NELSONSANTIAGO,

  1. when exactly you receive the error message?

  2. is the Belkin easy transfer cable recognized by the Windows XP computer?

  This file may be located on the Belkin Easy Transfer Cable installation disc.

  For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

  http://en-UK-support.Belkin.com/app/product/detail/p/4825

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 installation fails with the error "the product key entered don't match any available to install windows images.

  I have a Sony Vaio SVE1113M1EB provided with pre-installed Windows 8. Yesterday, my laptop won't start and recovery tools did not work. Then I deleted the partitions in stock and tried to install Windows 8 on DVD. He said: "the product key entered is not one of the images available for installation windows." I wrote my product key. How to install Windows 8?

  Original title: Installation of Windows 8

  Hi Qadir,

  The issue could be due to the supplied product key does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  I hope this helps. If you have any other questions, we will be happy to help you.

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.