My PCIe-6259 will work in a different PCI slot?

Similar Questions

• PCI vid card will work on MBs that have a PCI-E slot?

  I noticed that the PCI video cards will not work with a motherboard that has a PCI-e slot.  My ACER machine would use my GeForce FX 5200 (relented and bought a WG 220).  Now I have this HP Pavilion a1510n Media Center Edition 2005 that will not recognize an ATI Radeon x 1300.
  
  The PSU has more that required, Antec 380W Green (even a pcie 6pin).  I tried to change the main display in the BIOS to the PCI, but should not be.  Also tried to install the drivers, then change the BIOS setting, still will not take.

  I noticed that MBs with AGP are able to use PCI vid without the same question cards.

  Is it me?  Other people running into that?  I know its sad to not use the pcie slot, but I have to work with the hardware I have.

  Y at - it a trick to make the thing work?

  Found!
  
  Although I've been using a PCI video card, BIOS asked me to choose the PCI-E option from the list of video devices of the pcie, pci and onboard.

  The PCI option wouldn't work for the PCI in the vid!

  (HP Pavilion a1510n MCE2005-> ATI Radeon x 1300)

  Never thought to try that, but when I was watching the IRQ I saw that he was not part reserved for PCI-E.  It is the question of the nature of the PCI-E and so tried it because I was thinking about it.

  I hope this helps someone else.

• I have a HP Pavilion a6210z he aPCI-E x 16 slot, one PCI-E 2.0 will work?

  I have a HP Pavilion a6210z he aPCI-E x 16 slot, one PCI-E 2.0 will work?

  Hello

  PCI Express x 16 2.0 is fully backward compatible, then Yes, it won't work if it's the only issue.

  Kind regards

  DP - K

• A 80 mm m2 PCIe drive will work in the ZBook 15 g2?

  I am considering buying a g2 ZBook 15 opportunity which is * not * have the m.2 PCIe drive (drive Z Turbo) and I would add a.  Unfortunately the HP person I talked on the phone can't seem to find a way to sell me one.

  I found this thread:

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/zbook-17-G2-options-for-adding-a-new-Z-T...

  where the author indicates the m2 PCIe drive iin 17 g2 s a unit of 60 mm (I guess 15 g2 uses the same).  Readers of PCIe m2 only I can find are 80 mm, so I wonder if those who will work.

  So I'm looking for answers to two questions:

  1. a 80 mm m2 PCIe drive will work in the ZBook 15 g2?

  2. in the case, where can I buy a 60 mm m2 PCIe by car?

  Thanks in advance

  OK - found the answers in this thread:

  http://Forum.NotebookReview.com/threads/zbook-G2-owners-alternatives-to-z-Turbo-drive.769103/

  First of all, don't - 80 mm form factor will not work.  You must use the form factor of 60 mm.  They are not the same.

  Second, according to this thread alone, 60 mm available PCIe drive is the SanDisk A110 but I can't find it anywhere.

  Thirdly, at the time of this thread (January-February 2015) you cannot buy the HP HP's PCIe drive unless you get it with the laptop.

  So, in the end, as early may 2015 you cannot move to a PCIe SSD with the ZBook g2 series.  You have to buy when you buy the laptop.

• looking to purchase a copy of the elements after the trial. However, basket indicates platform: Windows. I need for Mac. Before I commit the activation code will work for the Mac. Impossible to find anywhere on the Web site to buy different versions.

  looking to purchase a copy of the elements after the trial. However, basket indicates platform: Windows. I need for Mac. Before I commit the activation code will work for the Mac. Impossible to find anywhere on the Web site to buy different versions.

  Hi Mljohno,

  If you search for items 14, go into products from Adobe, click on 'Buy' in front of the name of the product and use the drop down menus to specify Mac or Windows full version or upgrade.

  Best,

  Del

• X 1 PCI-E 1000 Mbps cards exist which will work with ESX 3.5

  Hello

  I currently have two ethernet Intel Pro GT cards, which work well in ESX 3.5. I wonder if you do PCI-E x 1 1000 Mbps cards available which will work with ESX 3.5? All my PCI slots regular are met, namely.

  Thank you

  Hi, take a look at the Intel Pro1000PT series, the single nic will work on a x 1 bus whilest the dual nic and quad variants will run on a 4 x / 8 x / bus 16 x and are on the HCL, just search under the e/s intel and its high - the only weird is that the HCL it graphic adapter States PT , Dual PT and PT quad, but when you go into the details for the PT adapter (which you'd think was the only port), it says its got 2 ports...

  Thank you

  Neil

• Why Firefox suddenly empty - no address bars, research or tool uninstall/reinstall d/n is resolve - now only v 3.6 will work?

  I've been using the latest version of FF and last week, the browser froze and when I restarted it was completely empty. I went through the help section, tried to uninstall manually by deleting files and reinstall several different versions, but the only one that will work at this point is 3.6.28. Your help sections and non-existent customer service SUCK - I don't have days/hours to mess with this and will completely abandon FF if adequate assistance is not received quickly.

  Who did the trick - thanks! I think it's only something called Codec-C, identified by Mozilla as malware on 29/10/12.

• A keyboard for a Portege S100 will work in a Portege M100?

  Quick question - a keyboard for a Portege S100 will work in a Portege M100?

  Page layout looks like. Although a different color.

  Hello

  I think that you can not use the same keyboard as the Portege S100 supports the year-easy-to-use 84 keys (US) or 85-keyboard (UK) and the Portege M100 supports the year-easy-to-use 85/86-keyboard.
  In addition, the S100 connector supports the keyboard interface 34 CN3230 pins and the M100 supports PJ3230 34pin keyboard connector.

  So maybe this could be a problem.
  I recommend using the original keyboards published for each laptop model.

• What internal DVD +/-RW will work with my Satellite P10-304

  Can someone give me an answer to what internal DVD +/-RW will work with my Satellite P10-304.

  I said a CSD-6012 or DVD +/-RW UJ-820 might work.

  Help, please

  Thank you

  Lee

  Hello

  Have you checked the manual of the Satellite P10?
  Sometimes, compatible CD/DVD players are in the user manual that must be installed on your laptop.
  If you n t have the user manual, then you can download from the Toshiba page.

  However, if you don't get the right info in the user's manual then I would recommend contacting the ASP in your country for details.
  Usually, you can order a player taken in charge of these guys here.

  It is important that you know which drives are compatible because of the different master\slave\c-salt settings.

  Bye and good luck

• DASYLab 5.6 will work with one nor 9171

  I have a NI USB 9171 a universal module with an older version of DASYE Lab 5.6, I have not yet loaded the software. But I was owndering if the Dasylab will work with automation of the measurement? I installed the MY LabView Signal Express, it is just too much and I want to use something more user friendly

  Thank you

  You ask if 15 years old software will work with a new device of NOR?

  Not very likely.

  First of all, the supported operating system is very different - V5.6 only was not supported with XP, Vista, Windows 7 or 8 (they didn't exist!).

  V5.63

  • Windows 95
  
  
  • Windows 98
  
  
  • Windows ME
  
  
  • Windows NT
  
  
  • Windows 2000

  You can upgrade your DASYLab V5.6 V13 and get full current operating system of assistance and full device support OR.

• Y580 mSATA will work with 6 GB/s speed?

  Hello

  According to Y580 Manual:

  SATA controller: serial ata, sata 6.0 GB/s, integrated into the chipset

  As it is said, SATA interface can work with 6.0 GB/s, but mSATA can work with this speed too?

  I need to know, because im afraid that I'll buy a 6.0 GB/s mSATA SSD and it works with 3.0 GB/s.

  Thank you.

  It will of course. The Msata slot is a sata3 (6 Gb/s) and the Bay 2.5 "is a sata 2 (3 Gb/s).

  I have a Crucial M4 installed in Msata slot. It's the 256 GB model. He gets of the readings all about 450-500Mbs and writes at about half that speed. I noticed different benchmarks give results different tho.

  Do not believe what the manufacturing, the speeds are, check with someone who actually put benched them.

• The jury of ELVIS will work with LabVIEW Student Edition 2010

  Hello

  This question was asked in the forums of LabVIEW, but no solution has been found. I have a windows 7 x 64 machine with LabVIEW 2010 Student Edition. When I try to install ELVIS 3.0.5 traditional software I get the following (no error code) message: "this Setup program requires the LabVIEW 8.5 development system or later to be present on this computer. Development system LabVIEW Base in any version of LabVIEW is not supported. Please install LabVIEW and then rerun setup of NI ELVIS. »

  I also installed the DAQ software for PCI DAQ board. I do not have access to a 32 bit machine and do not know how to get my board work (no ELVIS II) ELVIS. I have provided a screen shot of the message during the installation of the software of ELVIS.

  .

  Hey dduong16,

  Thank you very much for taking the time to provide additional information. After talking with several experts about your system, we concluded that this error is the result of an incompatibility between 3.0.5 Elvis and LabVIEW 2010 64-bit. Even the latest drivers of Elvis are not yet supported by 64-bit LabVIEW: see notes in support of the operating system on the Readme Elvismx 4.2.3

  To solve your problem, you will need to uninstall the 64-bit version of LabVIEW and install a 32-bit version. If you are a student, you should be able to get this version of your computer (it will work fine with your Windows 7 64-bit OS - it will install on 32-bit OS emulated inherent in your system). If you are not a student, please send me a personal message, and we will be working with an account representative to get you the necessary version.

  I apologize for the inconvenience, this made you and appreciate your patience. We have updated the Elvis 3.0.5 Readme to reflect this incompatibility (the change may not appear yet, because it takes time to propagate through our system), and I'm trying to create a Base of knowledge on the subject article to help future users who encounter this error.

  If there is anything else that I can help you, please you after return. Thank you!

  ~ kgarrett

• 2356ni P6: p6 2356ni and ti, zotac GTX 750 HP it will work?

  Hey my office's hp p6 2356ni, (mini-tower case). I want to use the chart zotac gtx 750 card ti. I would like to know if these two will be comapible in terms of PCI slot, the size and power. I have a UPS with a maximum capacity of 500 will

  Thank you.

  Hello

  Please report the number of HP for your PC product. How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers. This will allow others to review your question, make suggestions and review your answers. It is usually the best way to get help.

  The 500 inverter WILL have nothing to do with the NVIDIA graphics card.  However, UPS, run time may be shortened according to the overall power load.  If the 750 replaces a higher power graph card then the operating time could be extended.

  Wil you need to open your PC and do some measuring inside.

  Not every graphics card will work in any PC.  Know what the return policy is before you buy anything.

• A USB cable will work with any device?

  Title: USB cable original

  Hello.

  Let's say that a SCART is not equipped with a USB cable.

  Is a 'universal' USB cable to work with "any" device USB or different types of devices have different types/forms of USB cables?

  Thank you.

  USB is pretty universal.  The flat rectangular plug that goes in your computer is known as a 'Type A '.  The square plug that usually goes into a printer is a "Type B".  There are also small connectors (Mini-A, Mini-B, Micro-AB, and Micro-B).

  <>http://en.Wikipedia.org/wiki/USB#Connector_types >

  Generally, if you find a cable with the appropriate connectors, this will work.  If the device to which you are connecting does not fall into a general 'category' (e.g. mass storage devices), then the driver software may be necessary at the end of the computer.

  HTH,
  JW

• Original title: A new version of windows will work with my Windows XP?

  Original title: A new version of windows will work with my Windows XP?

  My computer needs a new startup disk, as I lost the original. Is it possible to buy a new one with Windows 7 or XP?

  Why do you think that your computer needs a new boot disk?

  It would be surprising to find a genuine Windows XP CD in the retail market (a store) these days, but you can make Internet purchases and may not be no need to buy one at all because it's nice to make just a copy of one from a friend.

  It is a good idea to have a couple of different bootable CD in your arsenal in case your XP problems a day and do not start.

  I find that most people can get by with a bootable XP Recovery Console CD you can do (no XP media required) and a Hiren boot CD.

  I've never seen a XP problem that I can't solve if I at least so many of those - and they are free to do, and you don't need any Microsoft original media to create.