my printer is not on my network

Similar Questions

• C4280 will print but not scan via network

  C4280 USB connected to a Win7 Pro.  A XP on the cable network will print to it but there is no sweeping action.

  Hello

  A USB device allow scannign on a single computer connected with a USB key.

  MS Windows offer features sharing the printer to share a printer over the network, it does not include any scan sharing features and so such configuration only provide functionality of the printer to the client computer (XP in this case).

  To get all features on several computers, you will need a connected device (by ethernet cable or wireless) network, such a single USB device will not provide such a.

  Shlomi

• Printer will not install on network

  I have Windows 7 Home 64 bit installed. Everything worked fine with two Brother printers installed on the network by me for the past few months since the purchase.  With updates of Windows 7 and other software updates; printers began to disconnect and not print.    I tried to re - install Brother printers.  These were installed (wired) as network printers in ~ May. Work around: I can make work plugged directly into the computer USB port but not through the router.

  When you try to install them as printers network; It lists the printers, see below; but when you try to install; the "Add printer" window comes up and says "Printer Installation Failed"

  Select a printer
  Brother MFC-J615W [001ba97cd991] Http://192.168.1.101:80/WebServices/peripheral
  Brother HL-2270DW series [001ba982ac57] Http://192.168.1.100:80/WebServices/peripheral

  Printers show with a yellow error in devices indicator / window of the printer.

  I have updated the firmware and drivers for the printers.

  Hello
  I suggest you post your query in the TechNet forum.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Wireless Canon Pixma MG5320 printer does not

  I got the Pixma MG5320 for a few years. All computers are connected by wifi. Not had any problems until yesterday. The printer is displayed in offline mode in all computers suddenly and nothing can be sent to the printer. I tried to turn the printer off and on several times. The printer itself seems fine. I did the same thing to computers. The printer does not appear in network. I use Windows 7 and Windows 10.

  Anyone know what is the problem and how to fix it? This is the problem with the wifi the printer component and is it replaceable?  I have a lot of unused cartridges. Just too lazy to replace this printer yet.

  Hello.

  If no changes have been made to network and continue to get the error offline, additional troubleshooting is required to limit the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help contact us.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• Phorosmart d 5510: printer does not connect to the network upgrade

  A combination of problems:

  I recently updated my broadband and also bought a new computer

  Today my printer has stopped working. I tried to reinstall, but my desktop computer, or laptop can connect with him. I checked this is the connection to the server, but it will connect with the SSID of 2.4 ghz. WiFi on my computer works with the SSID of 5 ghz. I guess that's the problem, but the printer will not recognize or find the SSID of 5 ghz

  Hello Dudley151,

  Thanks for stopping by the HP community! I see that you are facing problems with wireless connection. You have changed networks and are unable to get the connected printer.

  Yes, the problem is HP printers are not compatible with the 5.0 GHz networks.

  To get a better understanding, take a look here: wireless printing Center

  I hope that answers your question.

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• HP software detects the printer, but then "the printer could not be installed on the network.

  I tried looking for a similar problem, but have had no success yet.  I doubt I'm the first to this problem!

  The computer is XP SP3, is printer Deskjet 3050 has, and it's a WiFi WPA - PSK.

  The printer confirms that it is connected to WiFi.

  When I run the tool on the computer, to the point of network configuration check, the installation software detects the printer with the correct IP address.  It's the only thing he discovered.

  I click Next, and after a minute or two, I get the error "the printer could not be installed on the wireless network" click Retry to try reinstall the printer on the network, or click Cancel to return to connection options.

  This just cycles with no progress.  I have disabled the Windows Firewall and also disabled the AV.  No change.

  I can access the interface web printer - but still cannot install the printer.  It is listed in the printers and faxes as being offline.

  I'll try removing it again and add new-but-that someone has encountered this problem before, please?

  Well, my problem is almost solved. I uninstalled the software and then downloaded the software of the printer on the HP site where it is more recent than what was on the CD... and it's fixed!
  
  I can print wireless!
  
  Cannot scan, the printer gives an error, but that's OK for now.

• "I get a message when troubleshooting my message" printer does not "on my screen, it says"contact the network administrator. What does that mean?

  I think that the port of my computer does not accept my printer

  Hello

  (1) what is the brand and the model number of your printer? In addition, how the printer is connected to your computer?

  (2) is on a network or locally connected?

  (3) what operating system is installed on the computer?

  (4) when this printer worked very well for the last time?

  (5) where to get you the message printer does not, it is while printing a document or by pressing any button on the printer?

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.
  Note: The following troubleshooting applies for the Windows 7 operating system.

  Method 1: Run the printer Troubleshooter
  Name, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  On the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. below "Printing on the following ports" section, select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  e. click the general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  I hope this helps.

• HP Solution Center does not recognize the network printer

  Network has a hp 309 a printer, can print from the computer, the problem is:

  HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

  Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

  Resettlement on your machine won't affect only you, no other machines on the network.

• Network printer does not not after doing a full restore to factory settings

  I DID A FULL FACTORY RESTORE ON MY COMPUTER AND NOW MY PRINTER IS NOT WORKING.  I HAVE ADDED TO MY LIST OF PRINTER AND TRIED TO DOWNLOAD THE DRIVERS FROM THE BROTHER WEBSITE, BUT NOTHING IS THERE FACT.  WHAT I DO NEXT

  Hello

  ·         What is the number and model of the printer?

  ·         You try to install or download the printer driver?

  ·         They have trouble printing from Web site using Internet Explorer?

  ·         Is the printer on the network?, if so it prints?

  Response with above information to better help you.

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Printing is not printed on network printer

  I just installed new Fuji Xerox DocuPrint CM512fw on a home network via Wi - Fi, replacement inkjet (via USB).

  The functions of printer for other computers on the network, but not my HP Pavilion (p6775a) Windows 7 Home (64).

  It is that connects to the printer via a standard TCP/IP port.  I can see the printer in Devices_and_Printers, can access it via the web interface, even to generate reports of the internal printer.  HOWEVER, I can't actually printing!

  The test print is generated and goes to the print queue, seems to be sent (briefly showing status 'printed') then removes printed reference (or lies to the mark with the status "deletion" - printed) the printer do not even wake up.  The same happens when I print via USB.

  It's like going to the print job to a printer zero.

  I have:

  reinstalled the printer several times (!) on my HP machine.

  excluded the printer problem (substituted another printer - thank up FX & dealer)

  excluded network problems (I can print over the network to 2 other existing PCs, an iPhone and an Android phone)

  restart him spool printing,

  Run the System File Checker

  multiple, reboots and reinstalls!

  Please help anyone.

  Concerning

  Gavin

  Hello Gavin,

  You can try to reboot the printer once and then try to follow the following suggestions to solve the problem.

  Troubleshoot file and printer sharing

  (Also applies to Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Also, try to check the issue in the State of clean boot and see if that helps because, put your system to the clean boot state helps determine if third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Referring to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after troubleshooting.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  Thank you

• The printer does not print a network.

  Original title: Im on the network at work and the printer of the work is connected to the network, but the printer won't let me print! Help! No EXPERT BUT DO HAVE COMMON SENSE AND CAN READ WELL

  IM connected to a network at work and can see the printer that is on the network, but the printer prints nothing when I print the test page. Help!

  Hello

  Thanks for posting the request in the Microsoft community!
  I understand that you are facing the issue with printing on a network. Provide us the information to help you further.

  1. which antivirus software is installed on the computer?
  2. what happens when you try to print?
  3. you receive an error message?
  4. don't you make changes on the computer before the show?

  To get the problem solved, try the troubleshooting steps:

  Method 1:
  Try the link troubleshooting steps:

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  The above article is for Windows Vista. It applies to Windows 7, too.

  Method 2:
  

  Make sure print spooler service and the service of dependency for the print spooler service is set to automatic and started.

  To start the print spooler service and set it to automatic, follow these steps.

  a. right-click on computer and select Manage

  b. in the console that opens, scroll down the menu Services and applications

  c. click Services

  d. double-click the print spooling key

  e. in the 'Général' tab, go to Startup Type

  f. set to automatic, manual or disabled

  g. to activate or deactivate the service immediately, print spooler click on stop or start

  h. click on apply, and then restart the computer.

  Method 3:
  You can temporarily disable the antivirus and firewall on the computer and check with the question. Be sure to enable the antivirus and firewall on the computer.
  You can see the following link to disable the firewall.
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Just reply with the results. I'd be happy to help you further.

• Network printer does not print the laptop Documents

  I have an Epson SW235X printer wireless connected to my network via WiFi.

  2 desktop computers, 1 laptop and Tablet are also on the network.
  I can print from the 2 computers and tablets, but can't from my laptop.
  When I print (from word, the adobe reader software, etc...), it shows "Printing Page 0/0", epson event Manager, and after a while I get an error in the printing queue that says "error - printing".
  The problem images are below.
  Images:
  http://ImageShack.us/photo/my-images/715/printstats.PNG/
  http://ImageShack.us/photo/my-images/32/eventmanagerf.PNG/
  I uninstalled and reinstalled the software from the disc supplied.
  I have updated the drivers for the printer from epson site.
  I tried the application Microsoft Fix It printer problems.
  None of the above worked.
  Help please?

  Hello

  I'm sorry to hear that you have problems printing the laptop.

  Did you make any changes before the show?

  He has already worked?

  You receive an error code?

  I suggest to follow the items below and let us know if it worked.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Also applies to Windows 7

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  You can follow the suggestion of MichaelT777 from this link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-printing-problems/49458c16-e99e-4af9-8cd9-40299af66f8e

  Temporarily turn off the firewall and Antivirus

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  the HP software installed on the PC on the floor. Print wireless from PC upstairs and the PC in the basement on the network for the last month up to yesterday

  Now to receive above - two error messages cannot be contacted ove RL network and the printer is turned off.

  Reality - the printer IS on and the PC on the floor can print to the printer.  Network on the printer symbol says it is connected to the network.

  a reason any PC in the basement all the cant suddenly find the network and the printer?

  Hello

  The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

  This could increase the stability of the network connection to the printer downstairs.  If this does not help, let me know what OS is on the computer causing problem, because that could cause a problem?  Other than that, you can check the quality of the signal you get form the network and see if this can be a problem.

• Help! OfficeJet J6400 home network printer does not print more

  We have 6 laptops connected to a printer through a wireless router/network. Some laptops running Vista, some XP. Without apparent reason, the printer is not printing this Sony Vaio from Vista I write about now. It think it's printing and trying to then finally gives an error message (which only says: "erro)" I tried have disconnected and reconnected in the printer and the router. " I did a restore of the system on this computer to a few days ago, when the printer was printing of this laptop. I tried to remove and reinstall the printer driver. Still no luck. Now a second laptop does not receive the printer to answer. There has been no physical or systemic changes to the units. He could have the Windows updates at random, but I don't remember which. Any thoughts?

  Message edited by dowzerw on 07/10/2009 14:20

  While I was waiting for your last response, I went my firewall and changed the settings (even though I shouldn't have had that I had not changed in the first place). Received your note, and downloaded the HP Diagnostic Utility. Don't know what he did, but now I have the possibility to print again. I don't like having my settings of firewall change, esp as he points out he blocked 393 points in the last 6 days, but I'm going with it for now. Thanks a lot for your help.