Printing is not printed on network printer
I just installed new Fuji Xerox DocuPrint CM512fw on a home network via Wi - Fi, replacement inkjet (via USB).
The functions of printer for other computers on the network, but not my HP Pavilion (p6775a) Windows 7 Home (64).
It is that connects to the printer via a standard TCP/IP port. I can see the printer in Devices_and_Printers, can access it via the web interface, even to generate reports of the internal printer. HOWEVER, I can't actually printing!
The test print is generated and goes to the print queue, seems to be sent (briefly showing status 'printed') then removes printed reference (or lies to the mark with the status "deletion" - printed) the printer do not even wake up. The same happens when I print via USB.
It's like going to the print job to a printer zero.
I have:
reinstalled the printer several times (!) on my HP machine.
excluded the printer problem (substituted another printer - thank up FX & dealer)
excluded network problems (I can print over the network to 2 other existing PCs, an iPhone and an Android phone)
restart him spool printing,
Run the System File Checker
multiple, reboots and reinstalls!
Please help anyone.
Concerning
Gavin
Hello Gavin,
You can try to reboot the printer once and then try to follow the following suggestions to solve the problem.
Troubleshoot file and printer sharing
(Also applies to Windows 7)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing
Also, try to check the issue in the State of clean boot and see if that helps because, put your system to the clean boot state helps determine if third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Referring to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after troubleshooting.
I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.
Thank you
Tags: Windows
Similar Questions
-
HP Solution Center does not recognize the network printer
Network has a hp 309 a printer, can print from the computer, the problem is:
HP Solution Center not load-says incomplete installation. If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.
Question how can I get the Hp solution program to reward the network printer. If I reload the CD, then reinstall the will other people on the network of the problems?
Resettlement on your machine won't affect only you, no other machines on the network.
-
my printer is not on my network
Hi all
I have a hp j4680 inkjet all-in-one, he put in place to go wireless, for a while, it worked like to advertise, but recently I can't print or scan, I reloaded the drivers Monday, he worked for a while, but once again I'll have the same problem. I have an acer 5315 running vista Home premium with modem to DSL 2wire it appears on the back of my printer but it does not see my network. My question is by starting my computer first, and then the printer is the cause of my problems any help in this matter is appreciated
I rebooted as both computer and printer: the same result
Thank you
edf112you add the IP address of the printer?
can you ping the IP add?
can you access add the web server of the printer by using the intellectual property?
you have a firewall running on your computer?
-
Could not reconnect all network drives in Vista...
On startup, I get the message, form the notification area: "Could not reconnect all network drives.". How to connect readers. I have an Epson printer connected.
Hello
(1) what firewall are you using?
You are connected to a Modem/Router? If so have them turn it off for 30 seconds and turn it back on.
Let us know if that helps.
-
PhotoSmart c309 will not see my network
Any reason why my all-in-one will not see my network domestic? The Bluetooth radio works, but the wireless function does not work. This is not ideal for my other devices are more than 30 feet away and on several floors in the House.
Your printer is dead. It is a fairly common failure on this model. You can connect the printer to your router via Ethernet or if it's in another room, use a kit Netgear Powerline Ethernet using the wiring in your House as patvarkys.
-
HP Photosmart C309a AiO Wireless on and work, can not find the network!
My printer has stopped printing a couple of days. It was fine, now it is not. The blue light wireless radio is turned on, but when I run the network set in place, it works simply and can not find my network. I ran the network diagnostic and it detects my network, but can't find my printer. On the test page, it fails on SSID. I could use some help to get this operational back guys! Thank you!
Well, I can't comment officially, but I'm sure that has been discussed in, and design changes avoid this problem.
Regarding something is through HP, you could call the HP Technical Support and check if you have options to upgrade to a new printer. They should have a list of printers and prices offered as part of the upgrade process. There is no charge to call and check the options you have. If you are in the United States, call the 1-800-474-6836. Otherwise, click on the contact HP link at the top of this page.
-
OfficeJet J4680 not finding my network but found others in the neighborhood.
I'm unable to install my Officejet J4680 wireless. Although I put five feet from my router it can not find my network. It can however find network neighbors. My laptop is connected to the network without problem. The display at the front of the printer to the network of neighbors but not mine.
Can someone give me help on what goes wrong?
Thank you
We will investigate the printer Wireless:
- Press on the <#>and <*>keys together and release them together.*> #>
- At the same time press the keys '1', '2', '3 '.
- Press the right arrow button to scroll through the menu selections until you see "Connectivity Diagnostic Menu" appears.
- Press OK twice.
You should get a diagnostic report on the bottom of the page with a list of networks wireless detected. Tell me if you see your network wireless on the investigation.
-
Satellite Pro P300-1AY does not see wireless networks
I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
I replaced my card and it does not solve the issue.I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.
I use win XP. Any idea?
Hello
You have the latest version of the BIOS?
If this isn't the case, then you should first update the BIOS!The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
As far as I know, you must use 2.5 or later version BIOS.Check it!
-
Portege R100: WLAN does not recognize the network
I have a 2 year old Toshiba R100 Notebook.
It has a wireless adapter:Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter
We have tried several times and had technicians trying to connect to our WAP network office. He simply do not recognize the network and we offer all mailboxes menu to connect. It works fine on WEP networks and open.
Our network is one: -.Cisco Linksys Access Point Wireless-G with SRX, model WAP54GX
It has been suggested that I have buy a wireless card for WAP networks put in the slot of the card.
Would you agree?
If so, then that one would you recommend?
Hello
It seems that the card supports only WEP encryption and cannot handle WAP encryption that secures the WLan network.
Fact is that encryption depends on hardware and not software. This means that if the card doesn t supports the Protocol WAP for the update of the driver will not change this situation, but only a replacement card.
So I agree with you that the replacement card may solve your problem.Unfortunately, I can't give you any recommendations because I m not 100% sure what card uses the WAP protocol, but you can order the Wlan card compatible and supported by the Toshiba service partner in your country. AFAIK the guy order the Toshiba parts directly.
-
HP 15-ac042TU: do not detect WiFi networks
I have a HP 15-ac042TU (portable) (Core i3
4th gen / 4 GB/1 TB / Free DOS)
(M9U96PA) problem with detecting WiFi its foundation not to any network I tried to work with several drivers but is not currently working Broadcom 802.11 network adapter is installed tell me what driver should I install to runHello:
The only suggestion I can offer would be to try this driver if you have not already done so.
-
I changed my router to another wireless. Since then, my laptop cannot connect to my wifi. When I search my wireless network, it is exed out in red. and the message "the settings saved on this network do not match the network requirement"... Please help
[moved from comments]
Hey Mike,
-What version of Windows is installed on the computer?
This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387
Let us know if this can help, or if you have any questions.
-
I can't access the internet. I get a message that I do not have a network card.
I can't access the internect in my Pavilion s3707c slimline, message window: do not have a network card, replace a
Message: no netwrok (from my HP pavilion s3707c) adapter, needinstall it and configurad, where and how can I buy a new installation? can I buy a USB WiFi dongle for instead? What kind? Pls help, yourhelp are much appreciated.Hi eddy Chow.
· What version of the operating system is installed on the computer?
· Did you do changes on the computer before the show?
· It was working fine?
Follow the steps in the article.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
For reference:
Windows wireless and wired network connection problems
http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3882331
If the problem persists, contact HP support for more help and information.
-
Unable to connect to the Internet error "Windows does not detect a network card installed properly"
Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.
Any help is appreciatedOT: Internet connection
Hello
You did changes to the computer before the show?
I suggest you try the steps from the following link:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
I'm looking for a link to XP SP1 does not require a network connection to install
I'm looking for a link to XP SP1 does not require a network connection to install
Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!You can use this path to level – says in passing:Gold XP to XP SP2 to XP SP3.Note that installing SP1a is TOTALLY USELESS!Here are the detailed instructions:1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:
http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)
http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)
And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:
http://www.Avira.com/en/Avira-free-antivirus
2. disconnect Internet.
3. temporarily disable the automatic updates.
4. install SP2. Restart twice.
5 install the SP3. Restart twice.
6 switch to IE8. Restart twice.
7 install an Antivirus software.
(What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).
8 make sure that firewall Windows is activated (it should be).
(Now you can physically reconnect to the Internet.)
9 visit Windows Update to download and install only the critical security updates.
10 re - enable automatic updates.
After the back if you need guidance.
-
When I allow to share a folder, just not in my network (MShome).
HelloI use windows xp, when I allow you to share a folder, that it is not in my network (MShome) so I can't map a network drive .please reply.
Hi Saad51233,
It seems to be a problem with folder sharing permission. You can check the following items and check:
How to share and set permissions for folders and files using Windows XP
http://TechNet.Microsoft.com/en-us/library/bb456988.aspx
How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP
http://support.Microsoft.com/kb/307874
Hope this information helps.
-
Belkins wireless adapter recognizes not all wifi networks
I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it?
Laptop? If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey).
For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack.
Maybe you are looking for
-
Generates an event on the indicator
I'm developing a program in which I need to generate an event on the indicator, the project is as we give 4 entries for LabVIEW vi equipment, since these 4 controls are through material I can't generate events on them, so I'm trying to generate an ev
-
Start Windows vista, nothing on the screen, only the pointer of the mouse
I have a gateway desktop vista, nothing on the screen, only the pointer of the mouseI used the recovery tools nothing fixs
-
That e-mail address is already bound to an account of PhoneGap Build.
I'm trying to connect to Phonegap Build with my AdobeID and I get the error in the title.I think at one point I had an account Phonegap Build directly associated with my email address but I can't connect to this one no more, and when I ask for a pass
-
Hello, I am trying to download CS6 Design and Web Premium and I get to a point where I'm getting a pop-up saying continue to insert the disc to continue... the disc is inserted then I knocked and it does not read it... still get insert disk... can so
-
Weird start with 32.1 screen
We have this download error problem with our Magazine app. So I made an update with the new App Builder for v32.1. Now I get weird startup screens in the application of the developer.If I start the application horizontally I get the vertically the sp