bouncing volume spikes

Similar Questions

• Why bounces a direct route, it's volume?

  When I bounce a track or mix a single track to a file or a mixture that consists of a single export track, it's always peaks about 3 dB less than the peak of the original.  I have no effects on or mixture of volume.  I have the path and the master at 0db faders.  I forgot something?

  I want just an exact copy of the videos published on this track so that I can take it in another application without loss of quality (or volume).

  Thanks for any help.

  What is your panoramic setting in "advanced session properties"?

  View > Session advanced properties... (or ctrl + P) > tab mix

• MacBook Pro with frequent spikes in CPU

  I have an early 2011 MacBook Pro which is having frequent spikes in usage CPU (usually kernel_task). He does not seem to be caused by specific software and is cleared by putting just paused for a minute. He is constantly happening, however and is driving me crazy.

  I have replaced the battery, replaced the hard drive (with a SSD) and put to the RAM level. No change. I'm under El Capitan with a clean install, but the problem occurs with a clean install of Yosemite, too.

  Apple Hardware Test just an error on the battery (4/4xxx/40000005: G 'Battery') but I think it's just because it's a 3rd party battery. It works very well.

  Any help is greatly appreciated.

  The Sytem CPU otherwise turn about 1%, but here's a report from EtreCheck which was performed with the enriched CPU (kernel_task 623%):

  EtreCheck version: 2.6.4 (224)

  Report generated on 12/12/2015, 12:57

  Duration 13:23

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (15 inch, early 2011)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro8, 2

  1 2.3 GHz Intel Core i7 CPU: 4 strands

  16 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  8 GB DDR3 1333 MHz ok

  BANK 1/DIMM0

  8 GB DDR3 1333 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 5 - SN = W00030C0L77ZC

  Video information: (Does that mean?)

  Intel HD Graphics 3000

  AMD Radeon HD 6750M - VRAM: 1024 MB

  Color LCD 1680 x 1050

  LED Cinema Display 2560 x 1440

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - since the start time: about 3 days

  Disc information: (Does that mean?)

  SAMSUNG SSD 850 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  SSD (disc 1) /: 998,97 go-go (774,31 free)

  Storage of carrots: disk0s2 999.35 GB Online

  MATSHITADVD-R UJ-898)

  USB information: (Does that mean?)

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub USB 2.0 2 TB GenesysLogic

  Western Digital Ext HDD 1021 2 TB

  EFI (disk3s1) : 210 MB

  Backup of Volumes/Ext ext Backup (disk3s2): 2.00 TB (74.61 GB free)

  Hub keyboard Apple Inc.

  Apple Inc. Apple Keyboard

  Seagate Expansion Desk 4TB

  EFI (disk2s1) : 315 MB

  M4TB (disk2s2) / Volumes/M4TB: 4,00 TB (749,55 GB free)

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Audio display

  Computer, Inc. Apple IR receiver.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / Library/Extensions

  com [no charge]. FTDI.driver.D2XXHelper (1 - SDK 10.11) [click for support]

  / System/Library/Extensions

  com.Wacom.kext.wacomtablet [no charge] (6.3.15 - SDK 10.11) [click for support]

  Launch officers: (Does that mean?)

  [operation] com.wacom.wacomtablet.plist [click to support]

  Launch demons: (Does that mean?)

  [operation] com.prey.agent.plist [click to support]

  [loading] com.wacom.displayhelper.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.google.keystone.agent.plist [click to support]

  Items in user login: (Does that mean?)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: (Does that mean?)

  [ongoing] com.etresoft.EtreCheck.200992

  [ongoing] com.wacom.TabletDriver.179552

  [ongoing] com.wacom.WacomTouchDriver.178912

  fm.last.Scrobbler.168352 [loading]

  org.videolan.VLC.182432 [loading]

  Plug-ins Internet: (Does that mean?)

  Default browser: Version: 601 - SDK 10.11

  QuickTime Plugin: Version: 7.7.3

  WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - 10.9 SDK [click for support]

  3rd party preference panes: (Does that mean?)

  WacomTablet [click to support]

  Time Machine: (Does that mean?)

  Time Machine not configured!

  Top of page process CPU: (Does that mean?)

  623% kernel_task

  20% UserEventAgent (2)

  9% WindowServer

  0% askpermissiond

  Top of page process of memory: (Does that mean?)

  1.12 GB kernel_task

  Softwareupdated 475 MB

  Mds_stores 410 MB

  Console 213 MB

  Finder 197 MB

  Virtual memory information: (Does that mean?)

  8,94 GB free RAM

  7.05 GB used RAM (9.46 GB being cached)

  Used Swap 0 B

  Trepanation wrote:

  I have an early 2011 MacBook Pro which is having frequent spikes in usage CPU (usually kernel_task). He does not seem to be caused by specific software and is cleared by putting just paused for a minute. He is constantly happening, however and is driving me crazy.

  Why does it bother you? How do you know that this is the case, other than the use of cpu monitoring?

• Sound Volume settings do not go below 20% or greater than 70% HELP!

  After restoring my computer using Norton Ghost because of this problem, it happened again after several days and I have no idea why, or how to solve this problem.

  The green light on volume will be not less than 20% and not more than 70% using different volume controls.  This is verified by going to the control panel and looking at the settings of the sound card and all mixer controls accessed through entertainment console commands.

  All of them, no matter how I try to adjust my volume, can't go to zero, full 100%.

  I'm pretty sure that I did not visit all websites would have done anything to my system, although it is not always guaranteed.  I also run Avast Antivirus and Malwarebyte Anti-malware constantly.

  This issue first appeared a few weeks ago, during which, after struggling to set things straight I restored my system and yet tonight no reason apparent.

  When I try to move the cursor under a minimum of 20% is refuse and bounces.  And even more than high 70%.  It's as if some type of compression thing happening automatically as I do not turn.  Not that I know of.

  Everyone heard about this problem before?  How to fix?

  I thought I had discovered a solution.  Don't know how or why it worked, or what has caused this setting initially, but here's what I discovered:

  I went to Windows Media Player after having reviewed the Options tool, judged on the tab DEVICES, speakers highlighted and clicked on PROPERTIES, as the device to use default Directsound device.  I changed it to the map of his Creative Audigy, I have in my office and that seemed to do the trick.

  Yet once, don't know how this has changed or if it has never changed a bad choice, but by changing it ((retour) return) for my Creative Labs Audigy card, fixed levels of sound volume to 0 and 100%.

  = = = = = = = = =

  This post is almost a month after the one above.  This solution (changing the speaker inside Windows Media Player properties) does not work for me.  The problem I wrote originally, returned again tonight, and the difficulty that I thought I had discovered does NOT work.

  Everyone, if you know why the Green level bar can get stuck at 20% to 70% please advise!

  I don't know how to solve this problem.

• Pool and the Volume of data latency does not match the SanHQ

  Using some PS6000 (Sata and SAS) as a back-end for ESXi and looking at the graph view on SanHQ and the raw data on export, but I'm not able to give a sense of latency information.

  Generally for fields, the data in the column pool or member matches very closely to the sum of the parts of the volume (for IOPS / s, flow, read, write, etc.)

  However, latency is not, nor is he anywhere near average either.

  In the graphical display we noticed high (20-40 ms) latency playback of our pools and members, but the volumes that make up these pools are all less than 10ms. During a storage vmotion, we will see a huge spike in IOPS / s and latency and sizes KB will drop to almost nothing during the copy rebound back at high levels as the traffic goes down.

  Makes a lot of sense to me (except perhaps if seq I/O is reduced to deal with latency)

  To monitor latency, it seems that I need to watch the largest volume of latency of a given pool, but not the pool itself or asymmetric information.

  I would get a few reports of MS Log Parser against export CSVs, but I need to make sense of this first. Latency is a KPI is no not a lot of sense.

  When you see the IOPS rise and the latency goes down, it's actually a normal thing. It is called Nagle algorithm. It makes pretty much the TCP packets wait until they are full before sending them. Here is a document that can be useful, what explains the algorithm more in detail.

  http://SearchNetworking.TechTarget.com/definition/Nagles-algorithm

  Until reporting problem you're talking about I would recommend making sure that the last FW is installed on all members of the Group and ensure well the last version of SAN HQ are also installed. Just curious you have configured replication? I can't wait to hear back on your part.

• Bottom-up and top-down audio volume

  Hello world
  
  I'm recording voice for my tutorial project created in the CP3. I use an external mic that is designed for VO however, I noticed in some of my published projects that the volume will be up and down the slide to the slide. I am recording in a small office so I don't think I'm too move my head. I'm puzzled - this happened to someone else? There is no work around?
  
  Thank you!
  
  Krista

  It does not much movement to transform the volume bounce around the head. I record and edit my audio with SoundForge (producing WAV files). Can I use GoldWave to batch process files (noise reduction: Clipboard noise print, Equalizer: reduce Middle [for my voice] and maximize the Volume;) Full dynamic range, in that order. (GoldWave is after and his big batch.)

  Additional treatment is well worth, I think, unless your plans are absolutely packing.

• Safari volume control

  Is their not in Mac OS 10.0 Safari to limit the volume when an advertisement appears?  I'm ready to cut the wires to my speakers.

  Not really. The only application I know who has a limiter is Hear and it does not work with Safari. AdBlockers can help and if you mean literally popups popup blocking enabled in Safari security preferences. Otherwise, no.

• Installation of MacOS Sierra is not possible (no boot volume)

  Hello everyone

  I have an iMac with the following characteristics:

  

  and I'm trying to install the new Sierra of MacOS. But everytime I open the installation program, it tells me that I can't use the partition called 'Mac OS X', which is my main Mac partition on my drive of fusion, for the installation of Sierra because it cannot be used as a boot volume. Of course, it's completely absurd because I started 'Mac OS X' volume whenever I boot my Mac!

  This screenshot shows the installer and the associated message:

  

  Could someone help me please? I really want to do a clean install of all and that spend hours to restore my previous settings! Please...?

  Best regards

  Martin

  Hi mpauli,

  I see that the Sierra of macOS Installer gives you a message saying "this disk cannot be used to start your computer." In order to get this problem solved, I suggest you follow through the troubleshooting steps in the link below.

  Setup notes "OS X can not be installed on your computer" or "this disc cannot be used to start your computer.

  See you soon.

• A copy of the Sierra of MacOS and travel on the same volume

  I installed a new copy of the Sierra of MacOS, and most things seem to be well-oiled. However, I noticed that when I copy a file and paste it on the same volume, a copy of it remains in the original location. So, by example, if I download a file in the Downloads folder and then copy this file in Documents, a copy of the file remains in the folder downloads. On previous versions of Mac OS x, the default action might have to move the file of Di-ownloads of Documents. Is it possible to recover this feature?

  Another totally independent question is I see also that Terminal does not save orders, after its closure. So if I entered a command then close Terminal, after the reopening, I have to type the same command again. On older versions of Mac OS x, we could simply use the arrow keys to navigate through previous orders. Is it possible to recover this feature?

  Lojix wrote:

  So, by example, if I download a file in the Downloads folder and then copy this file in Documents, a copy of the file remains in the folder downloads. Is it possible to recover this feature?

  On older versions of Mac OS x, we could simply use the arrow keys to navigate through previous orders. Is it possible to recover this feature?

  Try the press / hold down the command key while you click and drag a file from one folder to another. Like El Capitan, this should move the file.

  About Terminal, the up/down arrows always work for me to remind the right Terminal commands like they did with El Capitan.

• removing a logical volume

  How to remove the volume logic en disk0s2?

  estorage-logical-volume-from-the-Terminal http://Apple.StackExchange.com/questions/136590/How-can-i-Delete-a-partition-Cor

• The network volumes fall, Finder crashes

  This problem is reproducible on two of my machines to date.

  The installation program:

  1. Mount a network volume (in this case DSM Synology NAS 6.0.2 - 8451 Update 1)
  2. From an application (in my case the Pages, but it happened in Word as well), save a document on the volume

  The result:

  • The document does not record
  • Disassemble the network volume
  • Finder crashes, recovery is no help
  • The application where I save also crashes and not even the activity monitor or a process kill Terminal will stop the process to run

  I thought that this might be related to Adobe Creative Cloud, Dropbox or folder by default, but I can reproduce this problem with all these apps does not. I am now more convinced than ever that this is a bug of networking of Sierra, but was wondering if anyone else has had this problem and if so, have you been able to solve it?

  Thank you very much.

  Just in case where somebody comes here first of all, as I did, a tour on the Synology forums confirms that there is a bug in the implementation of the AFP on Synology readers - and perhaps other NAS drives do not do by Synology. Apparently Apple has changed the Protocol quite that save files to a network volume will crash Finder and hang the tent application of the Save.

  The solution is to get any volume of network via SMB. So instead of cmd - K and typing afp://your-volume-name you smb://your-volume-name. Simple enough and it seems to work around the problem.

• Cannot find the volume of the speaker on the Iphone 6 IOS 10

  I have updated to IOS 10 on my Iphone 6. I can't find the volume control Chair that used to be in the control center. I have two control centres and in none.

  Hello

  In the Panel, there are 2 screens, drag to the right for the music and the left for the parameters. It will be the slider at the bottom of the music.

  Thanks again

  Will be

• What to do when ipod touch volume turns down by itself

  iPod touch 5 has started to turn down the volume in itself the sep 11.

  I have already restored like new, it did not work.

  Today it didn't turn... so I decided to connect it to the PC... I opened ITunes and you press the power button and open a whole... it turned on.

  Open ITunes window saying there was a problem and it should be updated... If it did not work it needs to be restored again.

  What should I do?

  I tried to make an appointment at the Genius Bar, but so far nothing

  Thank you

  -Do you have a case on the iPod that could be turned on the switch?

  -Is what the volume switch/look stuck?

  -If you have restored the factory settings successfully / new iPod via iTunes that indicates a hardware problem. Try the Genius Bar

• Photos taken of 20 GB of storage while the library is located on another volume

  Hello community,

  I installed macOS Sierra (on an empty SSD) two days ago, yesterday I opened pictures and changed the photo library location to another volume on my computer. The volume that I installed the OS on watch 20 GB of photos. in the storage management window. My library is on another drive and I checked the pictures folder in my home directory and it is empty.

  What is 20 GB

  

  

  Hard to say - have you rebooted?

  This is clearly not a matter of pictures but if it's a problem at all (it may need a reboot and/or time) you would probably do better in the OS forum

  LN

• Logic pro 9 crashes bouncing

  Yesterday, I upgraded to Sierra and since then I can't bounce to mp3, wav, or more. I click on bounce and logical crashes and that's it.

  I run an iMac (retina 5K, 27 inches, end of 2014) with 16 GB of memory, and so far, I'm always happy with Logic 9. (9.1.8 - 32 bit)

  I can restart the program and the project is it stil.

  Anyone out there who knows a solution?

  Erik

  Maybe the Sierra has problem with 32-bit applications? I have your place I'd try running it in 64-bit. If this does not help, I would delete the preferences. If all that didn't make a difference then I create a new user account, log in to it and see if it works. If this does not help, I would return to El Capitan. Generally, it is not a good idea to upgrade to a version.0 of a new Mac OS X when you work with advanced programs of pro.