Can someone help me get my printer to print? The State indicates printer ready, but it will not be printed.

Similar Questions

• Can someone help me because I am student who has recently renewed my membership but when I got to open photoshop it is not have she asked this same software you license I pay for the student kit and I can't redownload photoshop on my mac

  Can someone help me because I am student who has recently renewed my membership but when I got to open photoshop it is not have she asked this same software you license I pay for the student kit and I can't redownload photoshop on my mac because "you run an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms "!"

  When you install the 2015 cloud creative, all or part of the CC apps show 'trial start or buy now' in the creative cloud desktop application, please first try disconnect you creative cloud and folder in: connect and disconnect activate Cloud Creative applications

  If this does not help, see this link:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Epson Workforce 645 appears as the default on my computer and it says 'ready', but it will not be printed.

  Original title: printing problems

  I am facing a problem with the printer - or maybe a computer problem.  I can't pinpoint the problem.  My printer (Epson Workforce 645) appears as the default on my computer, and it says 'ready', but it will not be printed.  My documents will in Quebec, but after about 30 seconds, the State spends printing, error.  I've tried everything.  (Occasionally), it will display a test page.    Any ideas?

  Hi Julia,

   

  Thanks for posting the question in the Microsoft Community!

   

  You are unable to print and get the error message.

   

  I imagine the frustration you feel when you are unable to print.

  This can happen due to connection problems, malicious content or third-party programs.

   

  1 have you tried all the Troubleshooting steps?

  2 is the computer, or a printer attached to a domain network?

  3. are you able to print from Notepad?

  4. what documents do you speak?

  5 is the full error message?

   

  To check if it's because of connection problems malware content follow the steps mentioned below:

   

  Method 1: Run the troubleshooter

   

  See the site:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

   

  Method 2: Scan the computer to remove all possible malicious content

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135 .

   

  Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.

   

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Can someone help me get rid of a virus that has COMPLETELY disabled on my pc which is running xp.

  OK so I started my pc which is running xp, everything was normal until my desktop picture turned blue.  Then a program called MS Removal tool began to run a program by saying that it was scanned, I closed this program and I discovered that I couldn't open some programs to try to get rid of this virus as the Task Manager, avg antivirus, malware antibytes, I can't even access on my pc or files on my pc programs some of them will not even open.  Any help please.

  Restart your PC and press F8 key several times and chose the mode safe mode with networking.

  From there try to connect on:

  http://OneCare.live.com/site/en-us/default.htm

  And run full scan of the system.

  If still the same problem, then contact Support for Microsoft Security:

  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&FAQ=1&task=Diagnostics&St=1&wfxredirect=1

• Its took me 3 days to buy Presenter, finally I got it after work again now, I talked to 3 people online support, no one can help her looks like a joke at this stage can someone help me please its asking me for the serial numbers but I buy p

  Its me took 3 days to the presenter bought, I finally got it

  After that there's now work I talked to 3 people online support person can help

  It sounds like a joke at this stage

  Can someone help me please

  His request than me for the serial numbers, but I buy per month

  Hello

  This could be due to a host file incorrectly configured as hosts of operating system files map the hostnames to IP addresses. A misconfigured hosts file can affect the ability of your computer to connect to the Adobe activation servers.

  Follow these steps to see if there is a problem with your hosts file and if necessary

  Please follow the steps below:

  1. Click Start > run, type % systemroot % \system32\drivers\etcand press enter.
  2. Right-click on the hosts file, and then select Open. Select the application Notepad open the hosts file.
  3. Save the hosts file: choose file > record under, save the file as hosts.backup, and then click OK.
  4. Look for the hosts file for entries that refer to adobe (for example, 127.0.0.1 activate.adobe.com, or 127.0.0.1 lm.licensing.adobe.com) and delete these entries.
  5. Save and close the file.
  6. Restart your computer and try to turn it on again.

  Kind regards

  Sharad

• Hi it has blocked me my msn and hotmail says my hotmail has been using spam or send something I sent nothting can someone help me get off the list and get into my hotmail with questions please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: need help to get my hotmail to stop sending junk mail please

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Someone could have broken your Hotmail account. Change your password immediately. For more information, see account compromise - unauthorized account access page in the Windows Live Hotmail help center .  See also:

  Hotmail hacked? Take these steps
  Hotmail: Tips to help protect your account

  For additional help with Hotmail, visit the Windows Live Hotmail help center . They can help you better than we can in this forum of Windows XP.

  Good luck!

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Can someone help us get COMMENTS SETTING TOOL to work as described in Acrobat Pro XI?

  Our company seeks to pass on comments on paper to electronic shared reviews, and Adobe XI has been selected. (Window 8, Acrobat XI) However, we have a lot of difficulties.

  Our problem is that we would be able to join the small files (Word, jpeg, etc.) during the send it for shared review as described in the videos and the online help.

  What we have experienced is the following:

  1. a reviewer attaches the file using comments trombonepublishes comments and then closes.

  2. when they, another appraiser or the initiator opens the document, the name of the file to 'Unknown' changes and the name of the file with the extension appear in the Description in the list of attachments. This makes the unopenable file.

  Everyone knows this?  During the initial period while the file name always appears under the name in the list of attachments, it is pensionable.  When this name is placed on the Description field, it is lost.

  Here's how we do it:

  1. Choose the paperclip in the comments - Annotations
  2. Choose the location in the document and click it to select it.
  3. Select the file in the popup box and click Open.
  4. Click OK to select the icon and it is placed in the document.  File name now appears in the list of attachments in the left side of the document.  Using the simple arrow (right), it shows the attributes (name, Description, change, size, size compressed) the name appears under the name, the Description is empty, the size compressed, size and update the fields are filled out. Given that everything is finished, press on post comments.
  5. When the initiator or other reviewer opens, the name is unknown and the name of the file is now under Description and there is no way to identify the file or open it.

  Can someone please help us with what we're doing wrong?  They make it sound so simple, but nothing don't we try works. It was one of several features that direction really wanted.

  Thank you, Diane

  This issue with the COMMENTS SETTING TOOL has been resolved for our company with the release of 11.0.09 was updated today (17/09/14).

  Thanks to all who helped.

  Diane

• MRT.exe ate my photos. Can someone help me get back them?

  I am running Windows XP service pack 3.  I keep all my photos on a separate hard drive in its own file labled photos.  According to this hard disk a file arrived on labled 00f3f1d25bf937f91f.  When I looked inside this file, it shows that it contains a file called MRT.exe dated 05/17/2011.  As it has been bothering me not let him alone.  Unfortunately however today my mouse, which can be a bit tempemental, rather than open the file of the photo, which was immediately next to this file, moved the photo file to the folder labled 00f3f1d25bf937f91f and won't let me open it.  I tried to move the picture on the 00f3f1d25bf937f91f file, but the system is in place with access denied.  If I look at the properties of the photo file I can even if I can't open it, it shows the size of file as being zero byte.  Can anyone tell how I recover my photos?  I guess they are there somewhere the extrnal HDD is provided by Seagate and on my directory is called FreeAgent drive. It is not used for anything else other than a backup of hard drive that I did not run for a few weeks so wherever the photos went to what they always be you somewhere.
  Besides the above, I'm under full AVG anti virus with firewall suite etc. so I don't know I need anyway this program MRT.exe.  I seem to have three versions of the present on the hard disk at different times.  I have not looked to see where he may have repeated itself.

  Hi kirkleas,

  MRT.exe is the process for Microsoft Windows Malicious Software Removal Tool.

  Microsoft has released a removal tool from Microsoft Windows to help remove software malicious common specific malware on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP. After you download the Microsoft Malicious Software Removal Tool, the tool runs one time to check your computer infections per prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps remove infections it finds.

  The Microsoft Windows malicious software removal tool helps remove specific, prevalent malicious software on computers running Windows 7, Windows Vista, Windows Server 2003, Windows Server

  http://support.Microsoft.com/kb/890830

  Method 1

  Refer to the article below and try to take possession of the records, to check if it helps.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

  Method 2

  I suggest that you start the computer in safe mode and check if you can access pictures on the hard drive.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the previous step fails, then analyze and remove any malware or computer virus infections and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• CAN SOMEONE HELP ME GET THE CPU TO QUIT RUNNING AT 100 WITHOUT A RUNNING PROGRAM? What is going on? Help!

  I just bought a laptop about four months ago.  The processor works 100% now with absolutely NOTHING running.  Microsoft answers this question?  I have critical documents on this computer and do all my work on the internet but I'm not a computer person.  I barely know anything about software, but I started CPU research because its knocking out my computer and causing it to run hot.  What does windows do?  I need this problem is resolved or I guess that Windows can refund me the cost of a new cell phone to destroy mines and this making it a useless piece of junk.   Does anyone have an answer?  Or should all go us to Apple?

  Malware is the more likely choice.

  Quick fix:

  • disconnect from the internet (if you have no malware, you don't want no computer talking to the internet)
  • Log in as an administrator.
  • Start the Task Manager,
  • Click "show processes from all users."
  • Click the CPU column header to sort the processes by the use of the CPU, click to get the maximum at the top
  • Now, you will see, if all goes well the task that uses resources.

  If you recognize it, you might try to end the process. It may restart automatically.

  If you want to know what is running, download Sysinternals Process Explorer better. It gives much more information: http://www.techrepublic.com/blog/10things/10-sysinternals-tools-you-shouldn ' t-being-without/2033

  Then continue with the anti-malware if necessary

• Can someone help me get rid of Awesomeph?

  I downloaded an ebook, but turns out that it wasn't what I expected, so I removed it. But after that, I noticed that my search engine and home page has changed. I tried to delete everything I found about the download, that I made in the Control Panel, has managed to change my search engine and home page. But every time I start up Firefox, Awesomeph home page but when I click the icon on the home page, Google (which IS my home page) was going to start.

  I installed a malware software as what is recommended on sites dedicated to this problem. Scanned and remove 19 threats found, rebooted my system, but still, Awesomeph is here. What should do?

  Please take care

  Comments from one of the moderators of the forum ~ J99

  Please note that this cannot be recommended as a solution. Similar alternatives can be better.

  • Use Firefox Reset
    • See Firefox Refresh - reset the parameters and modules
    • Effectively, which creates a profile for the most part and removes Firefox extensions, while keeping the old profile as a copy on the desktop, where it may be needed again.
      BUT it does keep the passwords and bookmarks
  • OR create a new Firefox profile
    • See use of the Profile Manager to create and delete profiles Firefox_creation-a-profile
    • Note there is no need to delete the old profile. Some of the information and the files contained in the profile can be very important and can probably be reused.

  Simply remove profile removes important things like passwords and all your bookmarks.

  I find when Firefox behavior will not stubbornly return to as it should be, just delete my profile Firefox does the trick. Before making such a thing I recommend to backup your bookmarks to be reinstated later.

  Your Firefox profile is a file that contains all of the parameters of Firefox, extensions, modules, bookmarks and much more in it. It is created by Firefox when you first run the Firefox program. If you remove it so the next time you start Firefox, it will simply create a new - probably without any of the waste that has been modified in the last, and that is causing problems. In a system based on linux, this will be a folder named .mozilla in your home folder. To find the location of this folder in Windows, must meet a quick google where Windows stores the Firefox profile folder. Find it and delete it.

  If you do not delete your profile folder, you need to reinstall the modules or extensions. The difficult bit restores your bookmarks if save them you not first - and therefore don't do this beforehand.

• Can someone help me get to my email?

  I'm not able to get to my e-mail because I typed the wrong id, but the password.

  Hello

  1. What mail client do you use?

  2. who is the provider of mail service?

  Unfortunately if you forgot the email address, we will not be able to recover.

  I suggest to contact the courier service provider and check.

• I deleted my collection tray and don't no how to restore can someone help...? I tried the system retore & he, s still not re-apearing...

  I deleted my bin cans of my office & I tried to restore it, but he won't return...? If anyone can help...

  Here is the procedure: http://support.microsoft.com/kb/810869.

  In short,.

  To resolve this problem in Windows Vista, follow these steps:

  1. Click Startand then click Control Panel.
  2. Click appearance and personalization, click personalization, and then click onChange desktop icons.
  3. Click to select the Recycle Bin check box, and then click OK.

  If this does not work, follow the procedures in the article, which are more detailed and contain even a Mr. Fixit.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can someone help me with an 'easy to update the list of products?

  I'm doing a site for a client who are selling second hand machines and want to have a page with products that are for sale.

  This page should be easy to update because my client is going to do it himself.

  The problem is that if the list's container 10 products and, for example, the number 4 is sold, we do not want a gap in the list when my client is made number 4 on...

  We want a nice and smooth list that, when a product is sold and removed, there will be a nice list of 9 products.

  It should be really easy to update with editing in the browser... Anyone with an idea how to solve this problem?

  Thank you!

  Through IBE, your customer can change the image and publish the modified image/text. But to change the list itself with the same design, you would need for that of Muse.

  Another idea would be to show the item as "unavailable" once it is sold out to keep the list in the same format without modification.

  Thank you

  Sanjit

• My printer shows to be downloaded and ready, but it will not be printed.

  My printer is a HP PSC 1401 all-in-one.  I tried to download a driver to install, and it said: there is already a pilot.  My printer shows as PSC 1400 series and ready, but nothing happens when I send anything to the printer.  It worked until I got a Dell computer.

  Hi DeannaMcNully,

   

  (1) you get an error message?

  (2) what version of Windows you are running on the computer?

  (3) given that you filed your request in Internet Explorer (IE), this problem is only limited to IE?

  Method 1: Run the fixit available in the link below

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Method 2: You can see the steps mentioned in the article below

  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/973479

  You might want to know

   

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

• HP 15-r101na (Energy Star): Please can someone help me get my drivers

  Hi, please someone can advise me on where I can get the specific drivers, I need. I used to have windows 8.1 on it, but have been formatted and put on Win 7 but its telling me I need:

  Network controller

  Ethernet controller

  PCI device

  PCI encryption/decryption controller

  SM Bus controller

  (USB) Universal Serial Bus controller

  Any can you please try and let me know, I went to mine in the drivers of HP but didn't know we were right

  Try this one instead.  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  I think it's the top for V10.0.370.102