My problem is the subject of SECURITY ESSENTIALS in WINDOWS SECURITY CENTER

Similar Questions

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Game "Faery-Legends of Avalon"-"a problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available.

  I downloaded a game from microsoft called 'Faery-Legends of Avalon', I am currently running Windows 7 Professional. I can't play the game. The game turns on but when it gets to the part where you enter a character name, I get the answer that ' a problem due the program to stop working correctly, Windows go close the program and notify you if a solution is available. . Is this not compatible with windows 7 pro game. I just installed pro about a month ago and this is the first game that I downloaded from the installation.

  Moved from feedback

  Hello

  1. is this problem confined to this game here?

  2. have you checked if the computer meets the system requirements for the game?

  System minimum requirement for the game:

  * Operating system: Windows XP / Windows Vista / Windows 7

  * Processor: Intel Core 2 Duo E6600 2.4 GHz / AMD Athlon 64 X 2 Dual Core 5800 +.

  * Ram memory: 2 GB

  * Of hard disk space: 4.5 GB

  * Video: nVidia GeForce GT 140 / ATI Radeon HD 3870

  * Sound Card: DirectX Compatible

  * DirectX: 9

  * Keyboard / mouse

  If your computer meets the system requirements, then I suggest you to try the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to play the game and see if the problem still occurs.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  Check the event viewer for the event logs for the exact error message and the cause of the problem. The event viewer will give you all the information about the cause of the problem.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope the information is useful.

• The Electronic Program Guide (EPG) for Windows Media Center stopped display information guide

  The Electronic Program Guide (EPG) for Windows Media Center stopped display guide information beginning January 1, 2013 in the United Kingdom and Ireland.

  Microsoft is aware of the issue with the Electronic Programming Guide for Windows Media Center in the United Kingdom and Ireland.  We have identified the cause and have already deployed a fix for the United Kingdom.  A solution for the Ireland is being prepared and we will post an update when the problem is resolved.

  We apologize for the inconvenience to Windows Media Center users in these countries.

• Where can I find the Roll Up 2 update for Windows Media Center Edition 2005?

  I'm trying to download Media Player Version 11 and it says that I need to first install the Roll Up 2 update for Windows Media Center Edition 2005.

  Hello

  Before installing Windows Media Player 11 on Windows XP-based computer, you must download and install the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer.
   
  Initially, download cumulative update 2 for Windows XP Media Center Edition 2005 from this link.
  
  Update Rollup 2 for the Windows XP Edition Media Center 2005 (KB900325)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=12939
   
  Check out the link below to install Windows Media Player 11 on Windows XP.
  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8163
   
  For more information, see Help links.
  File Readme for Windows Media Player 11 for Windows XP
  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme
   
  Update Rollup 2 for Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/900325
   
  It will be useful.

• When I try to open any program or file the only thing that opens is Windows Media Center

  * Original title: only the open Windows Media Center

  Every time I try to open a program or file, the only thing that opens is windows media cente.ive had set up a new account just to be able to use my lappie, I have no point of restord

  Hello

  You can check out the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Try running the fixit and see if it helps:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Hope this helps,

• Problem with the network connection security

  When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

  How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

  Can you give an example of the websites that you see this 'error' on?

• Outlook 2007 POP3 problems after the installation of security updates

  After the updates of security for December 2010 has been installed on my computer, my Gmail POP3 does not. My access code are rejected.

  The i uninstall KB2288953 and after this operation bit is working again.

  See...

  • Microsoft Outlook 2007 may have problems to send/receive or performance after a recent update has been installed on the computer (17 Dec-10)
    http://support.Microsoft.com/kb/2485531

• Impossible to solve problems with the update of security for Microsoft NET. Framework SP1 (KB2657424)

  I hope that Microsoft Support will answer this question:

  Homepage of Microsoft Windows Update is re - download and reinstall the same update (KB2657424).

  I was advised to try this link: https://support.microsoft.com/oas/default.aspx?gprid=6527 and it brought me to this page.

  I downloaded Microsoft Fixit 50202, installed and ran, but in "default" mode, since he warned that "aggressive mode" may disrupt other updates.

  It took me 8 hours (using a dial-up access provider) to get through all of the suggestions, including those in the following links:

  http://support.Microsoft.com/kb/910339

  http://support.Microsoft.com/kb/906602

  http://support.Microsoft.com/kb/2657424

  http://www.Microsoft.com/download/en/default.aspx

  I followed the suggestion of Microsoft to visit their site and check out "Review of my update history". Since January 11, 2012, when Microsoft first downloaded the update to in question (KB2657424), it failed. Microsoft has offered by clicking on the Red 'x' next to the 'update failed' to open the info on the reason that has been...

  Error code: 0x01

  Microsoft proposed the search for this error code in this list:

  http://support.Microsoft.com/ph/6527

  The error code is not in this list.

  Microsoft said then click "find solutions," "enter keywords" and click on "search". The result was this message: "Sorry, no result found not to match this criterion."

  As I mentioned earlier, since the first update "failed", I clicked several times on the icon (almost daily), which reappears constantly in my taskbar, asking me to "Reinstall", the update, and these measures have been recorded at yellow end of Microsoft. As I mentioned earlier, the update of security (KB2657424) is already listed in my Add/Remove programs as being installed. The "update history" reveals that a series of 'success' (KB2657424) facilities are recorded as well as "failures".

  I went to Windows Update Microsoft Web page to 'review my update history'.  After analysis of my PC, Microsoft has determined that (KB2657424) "has been downloaded and ready to install," with another update of IE (KB2618444). So I clicked both for "Quick Installation".

  When you are finished, I revisited the "update history review". (KB2657424) has been disabled with the green icon as 'successful', while at the same time, in the right box next, there was a message: "Install Updates (1).» So I clicked it, and another window open with the message that the "high priority update" (KB2657424) had to be installed. Yet once, I clicked on "Install updates". He ended with another successful window "Update."

  Then I clicked to "review update history", and it was registered under the name "successful." But the window beside her reappears at the same time: "Install Updates (1).» I have has. ... It was the 3rd time within an hour. 3 slices of the same update (KB2657424) are now disabled with the green icon as "successful"... but the window side "House of Windows Update" reappeared again with the same message: "Install Updates (1).»

  Then I followed the suggestion of Microsoft to type in the "run command" keywords to the day windows journal. Since the January updates up until this date in February the journal is 428 pages (transferred from Notepad to Microsoft Word.)

  Then I followed the instructions to download the update 'NDP35SP1-KB2657424 - x 86 .exe' (1.3 MB) directly from Microsoft link... http://www.microsoft.com/download/en/details.aspx?...28569.

  As instructed, I proceeded to manually install it in "Safe Mode".

  The result was this message:

  Patch installation (c:\35b7019bd0df08ac0003ec93627c\NDP35SP1-KB2657424.msp) failed on product (Microsoft .NET Framework 3.5 SP1). MSI log: Microsoft .NET Framework 3.5 - KB2657424_20120209_020143359 - Msi0.txt

  I scanned the PC with anti-virus and anti-malware programs, and none of them found any malware or virus in the way of updates from Microsoft. "The 'update' where it is saved in the Microsoft Download link is the only and unique" ""NDP35SP1-KB2657424 - x 86 .exe." The "Update" as it is installed in my Add/Remove programs in the Control Panel is the same.

  However, both "Windows Update Home" to Microsoft Page as well as in my BONES, the "update" continues to override all commands of Windows. Another odd fact, is that this "update" that keeps re - download and reinstall itself is actually partitioned into three parts, and I wonder if they may be "clones". Maybe the Windows Installer Service does not know where to place them, or what to do with them. These are three:

  MSIPatchRegFix - X 86 .exe_

  NDP35SP1-KB2657424 - 86.exe_

  NDP35SP1-KB2657424 - 86.exeQ

  Hi Jeine,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• I cannot access the C: drive, Security Center blocks almost all executions, it allows me to access permisions

  Title says it all. I get errors saying C: / then file is inaccessible. I don't have the necessary administrator permissions, if I click on anything with the security shield, it does nothing. Help, please.

  [Transferred from Internet Explorer]

  Title says it all. I get errors saying C: / then file is inaccessible. I don't have the necessary administrator permissions, if I click on anything with the security shield, it does nothing. Help, please.

  [Transferred from Internet Explorer]

  Version of Windows is different, but the problem is the same... Follow the troubleshooting steps in the links below and update the thread if you can fix it

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/unintentionally-removed-ReadWrite-permission-on-c/ffcc1dde-e68d-40db-A00C-6e82d1133e93

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/c-is-not-accessible-access-is-denied/b8a0fa0f-DC68-4455-928c-97a225215071

• How to fix the windows live mail has stopped working a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available

  In the Middle looking emails from this error appears.  Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available

  Hello

  1. do you remember make changes to your computer before this problem?

  Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15

• I have a problem with the touchpad does not not on Windows 7.

  Original title: help. My touchpad scroll has stopped working.

  I have a laptop of Acer Aspire 5750z-4830. Touchpad scrolling does not scroll when I try. How can I put it to the top after that I took it to be repaired? Since I got it home now it won't work. And I don't have the cd to reinstall.

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the touchpad scroll has stopped working.  I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  This problem may occur if there are some differences in the file system or the associated scroll Touchpad drivers. Follow these methods:

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can also follow this link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 3.

  Check if control panel touchpad mouse is enabled or not. Follow these steps.

  1 - click on 'start '.

  2 - Select 'Control Panel' click the icon of the '' mouse. '' If you don't see the mouse icon, select Classic view of the control panel.

  Tab 3 - Click the "peripheral" in the window that appears. Select the 'enable '.

  4 button - Click on the 'apply' and select 'OK '.

  Method 4.

  Alternatively, you can also try the following steps.

  1 - Locate the "Fn" button in the lower right or left side of the keyboard of the laptop. The 'Fn' key has different text color on it or the key itself is a different color.

  2 look for the function key (F1-F12) on the top of the keyboard that disables or active the touchpad on the laptop. The key usually has an icon that looks like a touch pad with a finger touch she or a touchpad with a diagonal line through it.

  3 - Press "Fn" both the touchpad function key simultaneously to reactive the touchpad on your laptop. Move your finger on the touch pad to make sure it works. Press to disable the touchpad again at any time.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Problem with the adapter Bluetooth Logitech speakers on Windows 8

  I use Windows 8 Pro, but I had the same problem on the consumer Preview (some things are different now though)

  I use a Dell Inspiron N5010 laptop with a Dell Bluetooth 365 module.

  When I first install the Adapter Bluetooth Logitech speaker it works fine (there is no driver for it but windows installs the driver of basic ad2p). The problem I have is that after the computer sleeps, stops, or restarts the unit is unplugged (as expected) and I can't reconnect (only to remove the device and install again).

  In Windows 8 Preview of consumption when the device is plugged in, I could separate and connect it to the sound settings, but it would vanish from the sound after a sleep settings, reboot or shutdown.

  I could easily connect or disconnect the device by double-clicking its icon in devices and printers in Windows 7. If I do the same thing in Windows 8, an error saying "BTWuiext has stopped working".

  So basically after every sleep, closing or restarting I remove and reinstall the device...

  I also tried troubleshooting of devices and printers, and I checked that Bluetooth Service is running.

  Any help is greatly appreciated! Thank you.

  Hi radufly,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that, after every restart, sleep or a stop, you need to reinstall the drivers for your device. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  radufly, it seems that the device is not compatible with the Windows 8 environment. I recommend you to contact Logitech support http://www.logitech.com/en-us/support/support-contactus and check with them if they came with drivers for Windows 8.