My registered copy of Illustrator CS6 does not work after uninstall of CC-message to "renew your subscription CC.

Similar Questions

• My antivirus does not work after uninstalling windows 10 and return to windows 7

  I have upgraded to windows 10, but has had a few problems in general, especially with my keyboard, the printer, chromium and the office so I decided to go back to windows 7, but since kapersky does not work on my computer. I have full protection, but it will not work. I tried to restore my computer, but there is nothing before the upgrade to windows 10. I tried to restore to a previous version kapersky, but there aren't any. I can't uninstall it because it says it has been removed, even if it is still in the same place, I can't go back because he said that I have already. I tried running as administrator and in compatibility mode, but still does not work. When I try to run as administrator it says I don't have permission to access the item, but he isn't blocked or something. I don't know what else to do. Any ideas?

  You will probably never get Windows 7 running again, until you perform a new installation of Windows 7.

  I recommend a factory restore.  There is a hidden on your hard drive partition (assuming you have the original OEM hard drive) that has a copy exactly what was on your computer when you first started it.

  Tell us the brand and model and we will send you instructions on how to perform this.

  First of ALL, download your saved data.  Factory restore erases everything.

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Re: HP laptop touchpad does not work after uninstall of kaspersky anti-virus (version of windows 7 32)

  Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?

  Hello

  Try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with Networking" and press ENTER.  When it has loaded, download driver Synaptics following, and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe

  Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.

  When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.

  Kind regards

  DP - K

• Illustrator CS6 does not work on the new macbook pro.

  CS6 Illustrator still crashes after loading. I uninstalled and downloaded again. The same problem. The rest of the creative cloud works well. Is this a known issue?

  Thank you!

  Hannes

  I think that the problem is caused by a police.

  If you have installed a plug-in like Suite deal, delete the folder of extensis on these sites:

  [MacHD] /Library/

  and applications/Adobe illustrator cs6/plugins / Extensions / Extensis font management

  If no plugin is installed:

  Create two folders on your desktop "system fonts" and "make the user."

  delete the contents of [MacHD] / Library/Fonts folder "system fonts".

  and the content of [MacHD] / users / your user account/Library/Fonts "police".

  If it's ok, try to replace the fonts by groups to isolate the damaged font.

• Photosmart C309a: Printer does not work after uninstalling and reinstalling to resolve the question of the HP Solution Center

  HP Solution Center has stopped working so I followed the advice of HP Support Assistant to uninstall and reinstall the printer.

  Cannot get printer to reinstall successfully, and more, none of the physical controls on the printer will work much longer, even the power of the power button.  Have to unplug the power off.

  Ironically, I found since the 'solution' through this forum to get Support HP Center works again by uninstalling a recent Windows Update, but do me no good now.

  I tried to uninstall and reinstall the software of the driver several times without success and I'm worried that the function keys not working not not at all on the printer indicates an internal matter that cannot be repaired.

  Anyone encountered this problem?

  Hello - Thanks for the reply.  Power the device power on and off has not fixed anything.  However, suspecting an internal firmware issue, I did a search on the web to see if there was a mechanism to reset.  I found a very useful website that describes three levels of resets, and the second level one (#6) fixed my problem.  I'm surprised HP doesn't have this information in its documentation or on its website.  I understand he has the potential to be used for the wrong purposes and perhaps make an irreparable problem, but it is clearly the solution to an inoperable Panel.  My printer was working fine before this problem and is now back to work again.

  http://resetprinters.com/three-ways-to-reset-the-Photosmart-Premium-fax-C309a-all-in-one-printer/

• Control button does not work after the opening of Messages

  When I open the application Message, command suddenly stops working. I can't command-tab to switch applications, for example. This happens everytime I open messages; It is clearly linked.

  I'm under 10.11.6 on MacBook Pro (retina, 15 inch, mid-2015).

  Hello crabman230,

  Welcome to Apple Support communities.

  I see that when you open the messaging app, you can not command + Tab to change the applications. This only happens when the Messages app is open. I understand how difficult it can be for a feature works not when a specific application is open, and I imagine that you are probably ready to get this resolved. I have a few things I want to try.

  First, let's go ahead and give a fresh restart your MacBook Pro. Go to the Apple menu > restart. A time you've restarted, open the messaging app and test the command + Tab to see if you get the same result.

  Then, restart your computer in safe mode. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. Once you're in safe mode, open the messaging app and test new command + Tab. The following article will help you start in safe mode:

  OS X El Capitan: start in safe mode

  Finally, if you still continue to have a problem, create a new user and test again. In a new user test can help circumvent the problem of the current user to the system. This article will help you:

  OS X El Capitan: set up users on your Mac.

  See you soon!

• My InDesign CS6 does not open after expiration of CC 15 day trial.

  My InDesign CS6 does not open after expiration of CC 15 day trial. The only option is to subscribe to the CC. I don't want to subscribe, I want to use my copy of the CS6. I uninstalled and reinstalled ~ no still no chance.  Anyone know how to open it?

  If you have installed cs6 install the subscription, it will capture your license CS6. Common sense would have been to disable CS6 before install CC as CS6 contains its own (and better kind) CS6 software with more upgrades and possibilities than the old version in a box.

  If you can not install CS6 with your own serial number for this reason, you will need to contact Adobe to reset the activations.

• After Effects CS6 does not work on the system 10.10.5 Yosemite

  After Effects CS6 does not work on the system 10.10.5 Yosemite

  Yes, it will be. Just update to version 11.0.4 AE.

• I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

  After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

  A few external links to help you set permissions:

  MAC

  OS X Yosemite: set permissions for items on your Mac

  WIN

  Set, view, change, or remove permissions on files and folders

  r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

  Kind regards

  Ashutosh

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Bitmoji keyboard does not work after last update iOS 10

  My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

  the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.