My scanner is connected to my computer if it is an all in one printer?

Similar Questions

• All-in-One HP Envy 7645: how to scan from Windows 7 computer again HP Envy 7645 all-in-one printer/scanner

  I am trying to scan from my computer windows 7 using my new printer, as shown above.  I used to have an IP address with my old printer wireless so that all I had to do was get in line and type it in and print management, scanning and ink tabs HPs came. That's how I scanned it.  I get that now.  What Miss me?  Drivers or software?  To be installed automatically, you would think! with a new printer... does anyone have a solution? Thank you.

  Hello

  I do not know why you can not install the printer software and driver on your computer. I now have a ready 7640 Envy (identical to your craving 7645, even software and driver) in front of me. I have ben the test using 3 different routers, more than a dozen of Windows machines, phones Samsung, Samsung tablets, tablets from HP, iPhone, iPad, Windows phones. I can't test one thing: Apple Mac machines because I have not I don't have any plan to buy one.

  Installtion shouldn't take more than 10 minutes for the first computer; pop the CD just in run and please select Wireless during the installation process. For Windows 8.1 Please also using the same CD to inatall why doesn't not fit the CD I don't know. If no CD, please download the following file and run as administrator

  http://ftp.HP.com/pub/softlib/software12/COL55963/MP-134720-2/EN7640_117.exe

  Kind regards.

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• Can not scan using Savin 8045 All In One printer/copier/scanner

  Original title - scanning problems

  I connected a Savin 8045 All In One printer/copier/scanner of my Dell Vostro 470 computer via a cat 5 cable and router. It prints wireless and locally but not scan.

  Hi TomMargiot,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  I suggest you to uninstall all in a printer\scanner\copier and install it again and check if it helps.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  If the problem persists, I suggest you to contact the Savin Support for assistance.

  http://www.Savin.com/global/support.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• I can't use the scanner in the Oki C5510 all-in-one printer.

  Original title: Oki C5510 all-in - One Printer

  Hi I have a problem with OKi c5510mfp. Downloaded recommended for the device and the scanner driver is not being picked up, even if the printer works. OS is windows 7 64 bit. It worked on this laptop before, new hard drive was installed and cannot use the scanner since.

  Help please
  Adrian

  Hi Adrien,.

  1. were you able to install the drivers successfully?

  2. do you get any error code or error message?

  3. what security software is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Disable the security software and check if the problem persists.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Try scanning using fax for Windows and scan feature and check if it works.

  Scan a document or photo with Windows Fax and Scan:

  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan

  If the steps did not help, then it would be best to contact the printer manufacturer for assistance.

  Hope the information is useful.

• How do scan you a document from the printer to the computer using a c5180 all-in-one printer

  I try to scan a document to my HP Photosmart C5180 All In One Printer to my computer and like to know what are the steps to do

  Use the HP Solution Center to scan at the printer to the computer.

  HP this documentexplains how to scan with the HP Solution Center. It is very simple to install and use. Mine is configured as a network printer connected to my Linksys router wireless.

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Cannot download driver scanner Epson Stylus NX400 all-in-one printer, error message "error during installation.

  Original title: windows 7 driver scanner epson nx4000 troubleshooting

  message "error during installation"

  Hello

  1. How do you try to download driver?
  2. What is the full and exact error message?

  I suggest to set up the computer in a clean boot state and then try to download the driver manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Now, try to download the driver for Epson Stylus NX400 all-in-One printer scanner manually on the manufacturer's Web site.
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=106004&infoType=downloads

  For more information, please see the link.
  Installation of a scanner
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  I hope this information helps!

   

• HP wireless all in one printer C410 can get a connection

  I have a HP C410 e-All-In-One printer/fax/copier that is wireless. It was working fine with my computer until someone changed my internet security settings, and now I can't connect. How can I re - adjust the internet printer or the computer setting so that it is compatible again? My printer just wirelss button continues to Flash, as it cannot connect. When I go in the menu on the printer Wireless Setup, I can say that the printer sees my internet, it cannot simply connect. Help, please!

  The easiest way is to uninstall, and then reinstall the printer. If this does not work, then you should ask experts network for advice: social.answers.microsoft.com/Forums/en-US/w7network /son

• 6280 all-in-One printer - changing of USB to Ethernet - error - connection cannot find the printer

  I am trying to reinstall my C6280 all-in-One printer on the product - my original installation CD was for a USB connection, I will reinstall for an Ethernet connection for use on our wireless network. I have the HP manual - install the software of the product in Windows XP for a wired network connection (Ethernet) - but get the error message - unable to locate the printer.   I plugged in the ethernet cable to the ethernet port on the computer and the router (Airlink 101).  Any suggestions on what I might hurt?

  Hello

  You can use the following link to install the printer on a wired n/w.

  http://support.HP.com/us-en/document/c01708573

  Just to confirm... Make sure that you connect 'printer and router using the ethernet cable.

  To make sure that your printer is found during installation, after plugging the ethernet cable, make sure that your printer is get a valid IP address.

  Menu - Network settings - display settings - display wired summary.

• VMPlayer cannot detect the scanner for all-in-one printer?

  Hello.  I am running Linux Mint 14 in VMPlayer on your desktop AMD Win7 hexagonal base.  The implementation uses a MG5320 Canon all-in-one printer on a wireless network.

  Symptom: When you try to use the scanner under Linux software, I get an error that does not scan.

  Comments: I know that the printer is connected and can print from VMPlayer.  I used the scan software successfully in a Win7 laptop boots double in Linux Mint 14.  Therefore, the only difference is running Linux Mint in VMPlayer.

  How can I get the functionality of the scanner of my all-in-one printer with VMPlayer?

  TNX in advance for all advice.

  The 'virtual' printer in the virtual machine settings through the present printers on the host - there should be no impact on your ability to 'normally' adding printers inside the guest.

  Unfortunately, I'm not familiar with the same type of printer, and I'm not Linux.

  The thing is useful that maybe I can tell you, is that you may need to configure the virtual adapter as connected by a bridge instead of the default NAT.

• I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime?

  I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime?

  Can you explain what a printer has to do with the download of the videos?