My scanner is not communicating with my Mac

Similar Questions

• 6700 scanner does not work with my mac 10.9.2

  I bought the HP 6700, I tried to scan for the last 2 days! It works very well with my husband's computer (a PC), but it won't work with my MAC 10.9.2! When I try to activate the scanning to computer it just says "communication error".

  I tried:

  1 restart the printer, computer and router

  2 re-install the drivers (3 times).

  3. repair disk permissions

  any other ideas?

  Try scanning from your Mac. Use Image Capture app in your Applications folder.

  Click once on the scanner on the left side, and then click Show details on the background. Along the right side you will see MANY options for scanning and recording.

• Neat scanner does not work with El Capitan

  Neat scanner does not work with El Capitan

  You should check if there is a driver or firmware of the neat scanner that works with El Capitan.

• DASYLab is not communicating with the hardware dbk25a3

  Hello:

  I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

  DBK25A3O

  An entry of a module is open.

  Any help is highly appreciated

  Thank you

  Krishna

  The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

  MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why my CanoScan LiDE 30/N1240U scanner will not work with my computer laptop Dell Inspiron Windows vista?

  I would like to know why my scanner does not work with my laptop, I plugged the wires correctly and it says it installed, but when I press "Analysis" on the real scanner just on my screen with a box saying "there is no application registered for this event.
  The scanner also came with a CD and tried to install that but she had only three possible languages that were: Italian, Duitsch and Netherlands which I didn't understand at all!
  Does anyone know how I could make the scanner work? Thank you.

  http://www.USA.Canon.com/OPD/controller?Act=OPDDownloadIndexAct

  Download and install the correct software for it to Cannon on the link above.

  For English understanding/getting CD problems, contact the Canon Support:

  http://www.USA.Canon.com/consumer/controller?Act=SupportIndexAct

  See you soon. Mick Murphy - Microsoft partner

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• my hp printer does not work with my Mac, but because our hp computer. Why? CC = en

  my printer does not work with my Mac, but because our hp computer

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• OfficeJet Pro 8500 Scanner does not work with 10.4.11

  My friend just upgraded to the OfficeJet 8500.  He already had a scanner and a stand-alone printer.  Yesterday, we installed the printer and software, but the scanner will not show either when you press the button on the front console or from the HP Director software.  Any suggestions?  Printing and copy of work currently functions.  His system is an iMac G5 20 ", Mac OS x 10.4.11.  OfficeJet is connected via USB.

  Well Yes, even 2.0 compatible hubs can get in the way of scanning (but usually not print).  Try a direct contact with a known good USB cable.

  You can try uninstalling the scrubber, its probably a good idea if there are old pieces of HP software on your system.

• Epson Stylus DX4000 scanner does not work with Windows 7

  I loaded to the top of the AIF to Epson software with instructions, the printer works but the scanner won't.  I updated the drivers and the scanner still doesn't work.  I just get the message "Epson Scan cannot be started.  Please use the Troubleshooting Wizard to solve the problem"- the problem is that this does not solve the problem.  Don't want to replace a printer works perfectly and the scanner which worked fine with XP just because I have a new computer with Windows 7.  Can anyone provide simple tips please?

  Hello

  I suggest that you uninstall and then download and install the latest driver for the Epson Stylus DX4000 scanner from the link and check if it helps:

  Deleting a printer

  http://esupport.epson-europe.com/Redirect.aspx?lng=en-GB&url=ftp%3a%2f%2fdownload.epson-europe.com%2fpub%2fdownload%2f319%2fepson31929eu.exe&id=31929&ct=1&data=lkuCfcvA9czBDgwHlWJT3biPzWIxnMOejQJbU002FDdjgy0U003D

  Alternatively, you can visit the below link that talks about the availability of drivers epson sanner.

  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=en-GB&kbid=324521

• Scanner does not work with Vista Windows Equium A210-171on

  I have a Toshiba equium laptop (Vista)
  I am wanting to buy a scanner so I can scan documents to computer. (I have an all-in - one but the scanner does not work)

  Please indicate where to go?

  Thank you

  Hi Suzanne,.

  Sorry, I Don t understand why you want to buy a new scanner. First of all, it would be nice if you tell us what satellite you have. Other useful information would be exactly, what does NOT work on your satellite and your 'all-in-one '...

  Please provide more information on this subject and maybe you shouldn't buy a new scanner.

  THX

• scanner does not work with the new Maverick on Mac software

  I took my Mac for maintenance and has updated the OS to Maverick. Printing works fine but not the scanner.  Message is to make sure "scan to computer" is enabled in the printer software. I don't see all the software of the printer. Any suggestions?

  Hello and thanks for the updated information

  As you receive this type of error and you do not see the HP software on your Mac computer, then please follow this HP document on a message "No computer found" during scanning. The Photosmart 5514 software may have gotten deleted when you took your Mac computer for maintenance. At the end of this document provides troubleshooting steps to reinstall the software.

  Please post your results again!