my selection tools are appearing a pattern, the odd lines and the odd shapes

Similar Questions

• selection tools are invisible

  all my selection tools like lasso tools, tools selection Rectangle that they work but only their action appear when I finished

  like when I draw a rectangle I click and drag, then release the shape that I chose to draw does not appear until I release the mouse button

  which is very inconvenient in lasso tools coz I don't know what I'm doing

  Looks like you have a video driver problem...

  If you are using CS4 or CS5, try to temporarily disable the OpenGL drawing parameter in Edit - Preferences - Performance.  Be sure to close and restart Photoshop before testing the change in setting.

  Download and install the driver for your video card from the web site of the manufacturer of your particular card:

  ATI: http://support.amd.com/us/Pages/AMDSupportHub.aspx

  nVidia: http://www.nvidia.com/Download/index.aspx?lang=en-us

  Intel: http://downloadcenter.intel.com/default.aspx?iid=gg_support-EN_01+home_downloadctr

  -Christmas

• view selection tool, purpose of travel along the different grid

  I know that on a mac, you can have something mapped to the grid on the left and move the object along the grid on the right by holding down the ~ tilde ~ down while using the tool of selection from the point of view, but I can't figure out how make Windows... the tilde key does not seem to do anything.

  Are you referring to the perpendicular movement? To do this use the '5 '.

• the direct selection tool - how not to move the shape/path?

  This thing drives me to work my anti-stress ball: when I touch a path with the white arrow, I'm always first in a mode where the path may be moved. But I want to move a blink of an eye or the handle - is there a place where I can put this tool to do not move or or to select never all the way? I have the normal selection for that tool! I think I watch something. Thank you!

  orangestuff,

  You can edit > Preferences > General and then uncheck the box use area select, but it means that you need to knock or drag on the path when you use the normal selection tool.

  And it's always good to be able to make a success and train your finger to spring.

• Lowered target Version 9.0 or later form and now the validation messages are appearing, even when the Show Messages dialog box is set to "do not display any message boxes at all."

  Hi all:

  I went a form target version of "10.0 and higher" to "9.0 or more ' and now I get messages from automatic validation of Adobe to appear, even when the Validation of the form of the document is set on"don't show all the message boxes at all."

  Any thoughts?  I have listed some other form to 9.0 and higher and the same setting form Validation works "do not want to display all message boxes".

  The only thing I can think is the decommissioning of 10.0 to 9.0 or more did something?

  Thanks in advance,

  Brian

  without knowing what the errors are, it is difficult to say what the problem is. Forms are usually not popups unless you use FormCalc. Then, the software is displayed a FormCalc error.

• Is there a way to select an area of some of the elements of a csv file and read in LabVIEW?

  Hello everyone, I was wondering if there was a way to select only a certain "box" of the elements of a .csv file in LabVIEW? I have LabVIEW 2011 and my main goal is to take two tables and graphs against each other. I can import the .csv perfectly and separate each line and each column to be his own, but I have a 8 X 8 but want graphic in the middle of 4 X 5 or something like that. Is it possible to extract a table without starting at the beginning and end in the end? Thank you in advance.

  Hi Szklanam,

  as a CSV file is a TXT file with a different suffix, you can read a number of lines in this file. For example, you can limit the number of rows in your table of resultung. To limit the number of columns, you must always use an ArraySubset, so maybe it is much easier to read the complete CSV file and select interesting places with ArraySubset...

• scheck selection boxes are not displayed in the window options, nor does the scroll bar - why?

  Firefox is very erratic running. Scrolling is choppy at best. Usually, rocking it and descend is too far or no movement at all.
  Also, the scroll bar is black and there is no visible grab buttons to go up or down. Up and down arrows at the top of the bar are also blacked out.
  Selection boxes do not appear in tools, Options. Therefore, it is very difficult to make the custom choices.
  There is a significant delay after clicking 'OK', 'Cancel' or 'Help' buttons-, in fact, other buttons.
  I have 2 Add-ons 'All-in-one Side Bar' and 'Last Pass', no more.

  If I open firefox in safe mode all these problems disappear. Everything moves smoothly and check boxes appear.

  Have you tried to change the default Firefox theme, if you are using another theme?

  Have you tried disabling hardware acceleration?

  All this is in the article link I posted.

  Find out what steps to follow when the problem occurs in Mode without failure of Firefox, according to your original question and follow the links in the next section of the article.

  • See - https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems#w_3-restart-firefox-in-safe-mode

  See also - https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems

• Web pages are appearing in only the quarter left of my screen, why?

  See the above title

  Hello

  1. what web browser do you use?

  2. you remember to make changes to the computer before this problem?

  3. are you not able to maximize the browser window?

  Please provide us with more information to help you further on this issue.

  If you are using Internet Explorer, follow these steps:

  Use Internet Explorer in no add-on mode and check the status.

  (a) click Start.

  (b) click on all the programs.

  (c) click on Accessories.

  (d) click on System Tools.

  (e) click on Internet Explorer (No Add-ons).

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  (a) click on Tools, then Internet Options.

  (b) click the programs tab, and then click Manage Add-ons.

  (c) click an add-on in the name list, and then click disable.

  (d) repeat step c until you identify the add-on that is causing the problem.

  If this solves the problem, this could be caused by an adware installed as add-on.

• Selection tool will not drag over the items. Moves the page instead. Items stay in place

  It drives me crazy! I have not used the program in a few months and I'm guessing that it updated. Everything is different, and now when I try to select an item and move it, or select multiple items at once and move them, nothing happens. When I drag and output, the entire page moves, but everything I wanted to do move remain on-site. I can move them if I select each item individually, hold the shift key while clicking. Then allows me to drag this selection. How can I select all at the same time? Used to be able to drag over the area and he would choose everything.

  avocadolvr1972 wrote:

  Strangest thing, this was happening only on a single file, (which I just discovered), which is be a PDF file.

  In this case, you will need to inspect the layers panel. Everything is more likely a clipping mask (at least one if not more) that must be released.

• When I select 'tools' 'Add-ons' my extensions won't poster and Add-ons won't load what can I do to view in order to change the options?

  I have the 'Add-on' and 'the extension manager' Add-ons installed. Extension manager does not display the extensions that I use and the add-on Manager shows it loads the page but will not charge. I tried all the troubleshooting suggestions but none will fix the problem. How can I fix this problem so I can manage my Add-ons

  try to remove/rename the following files, if present in your profile folder - they store information about your extensions & might have gotten corrupted: extensions.ini, extensions.cache and extensions.rdf, extensions.sqlite extensions.sqlite - newspaper (they will be regenerated the next time you launch firefox).

  ALS see https://support.mozilla.org/en-US/kb/Unable%20to%20install%20add-ons#w_co...

• Selection tool sensitive to color in a limited area of the image

  Hi all

  For my work, I am interested in the measure of the area of pixel of the dark (black) in the sub picture, even the smallest. For less complex images, I used the magic wand and the selection tools to select my black areas and have Photoshop CC 2015 do measures on my selection. The problem with the image below that I have is that there are so many blackheads and they are scattered all over the image. Non-continuous the magic wand option unfortunately does not work for me in this case, because some of the dark spots have the same color as the other dark areas in the picture. So far, I only managed to make a good choice by selecting each point individually, which is a very tedious and somewhat subjective work. What I would like is a sort of quick selection tool with a tolerance as the magic wand option, so I can just fly over areas with small black to select tasks that these. I don't think that this is available in Photoshop, I'm looking for alternatives. That would also work for me, it is to have a way to limit the area that the magic wand tool selects objects of. For example, set a small area (as one of the white ice blocks) and then use the selection option discontinuous of the wand in this ice blocks so it will only select the dark stains on the ice block. If I can do this several times and combine the selections, I should be defined as well. Is it possible to achieve such a thing in Photoshop? In other words, what I would basically is the type of features in the background removal tool, but then make a selection in the foreground based on a color. All other ideas, suggestions, tips and tricks are also welcome! I hope my question is clear and that there is a solution for my problem. I'm very new to photoshop, so please be very clear in your answer, so I can understand every step .

  Edit: I noticed that I posted this maybe in the wrong part of the forum (?), I was a bit in a hurry at work. My apologies. If there is no matter what mod around to place them in the right sub-forum, please do!

  

  

  It works for you?

  To see it in full screen, double click on the image.

  1 use the curves to increase the contrast

  2. place an empty layer below the image and fill it white

  3. return to the top layer, click on the layer to bring up the layer Style

  4. in the section mixture if move the top left right slider until the black dots you want are isolated.

  Also, consider using this technique after the first change the mode to grayscale

• Remove the area using rectangular selection tool

  Hi Sir/Mdm,

  I was wondering why I can't delete a specific area using rectangular selection tool. I did drag the rectangular selection tool to define an area, then I hit the 'Delete' of the keyboard key. I was invited with the ' Fill-> content > dialog box. " Pls advise and thanks in advance.

  It's like you didn't read what I wrote.

  Please read again carefully.  Everything is explained.

  -Christmas

• How to make a straight line with the Quick Selection tool?

  Hi, I'm experimenting with Photoshop CS6 and wanted to autofocus on poles and the alley only, everything is blurry (the sky, cars, trees and higher levels). The image shows a better idea of what I mean. I am currently using the Selection tool quick to fill between the poles, then using fuzzy area, but is at - it a faster and more efficient way to do this? In addition, the quick selection tool is not perfect and shows jagged - like of the spots along the edges of the poles. I thought maybe it's posible to right field line as a box between poles and blurred in this way?

  You would like to use the Polygonal Lasso tool to create your form of selection. Once you use blur filters, this will create a cutting edge on the mask. Select the mask in the layers panel and then apply a Gaussian blur to the mask to smooth the edge. (or use refine edge)

• Tolerance of the Quick Selection tool

  I was wondering if there is a way to select the tolerance for quick selection tool - like option for the magic wand tolerance.  Too often, I find that the Quick Selection selects too, so...

  The logic of the quick selection tool is quite different from the magic wand tolerance digital option probably does not apply, but there is a way to make it less select. Do you know the Option key thing? If clicking on the selected too quick Selection tool, Option-click on the tool Quick Selection on areas declined. Who teaches the Quick Selection tool does not select again similar areas. Having done this, the next time that you click the quick selection tool, it should be more accurate. Clicking turns the desired areas and Option-click on the areas that you don't want, gradually refine you your selection until you get the selection that you like. Then, you can use the refine edge to tune in to the edge.

  In other words, instead of juggling with figures of tolerance, you can learn the tool by clicking on.

• Selection tool will not adjust the forms

  For some reason when you work with illustrator my selection tools won't adjust the forms more. I can move the shapes but I can't resize them or stretch them. If I have a form of rectangle on my selected screen, the hatch which are normally found in the environment are no longer there, also on the edges of the rectangle of the selection tool is not switch to the rotation tool. My selection tool also has a small black square down to the right that I have not noticed before. I have no idea how I got into this mode or other whatnot, but any help to return to normal would be awesome, preferably without resetting all my preferences, thank you!

  Display > display the bounding box