my site is SSL protected, but shows a triangle orange. Help!

Similar Questions

• Utilities airport shows a triangle Orange on Time Capsule, Wifi working

  Recently, my Time capsule is showing an orange triangle in AP-utility. By clicking on it, it shows the message: AP Time capsule found, with the possibility to forget.

  Time capsule shows a steady green light. Wifi is good job and my two other airports Express are being lit in the utility.

  I've read other discussions with similar problems. So, I did the following things:

  (1) soft reset of time capsule,

  (2) Changed link local IPv6 settings

  (3) disabled firewall

  (4) settings saved and restarted.

  It did not help for long after a few minutes the triangle orange has shown once again.

  In Time Machine, time capsule HD is not recognized or the other.

  But the wifi works perfectly.

  Please notify.

  I think that the problem is resolved.

  In this link, I found a solutionTime capsule will appear but the WIFI connection works

  He is working on 2 hours >.

• With 6.0, why it is more an indication that a site is secure? Even to sites using SSL confirmed, there is no longer this little safe "lock" symbol

  When making online purchases is more an indication that a site is secure.

  Previous versions of Firefox has always shown that little padlock symbol on the bar address or at the foot of the page.

  Even on sites that are confirmed THAT SSL protected, there is no indication that on the screen.

  In Firefox 4 and later you no longer have the Status bar which showed the padlock in previous versions of Firefox.

  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server.
  
  So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL.
  
  The lock feature has been replaced by the How do I know if my connection to a Web site is secure? on the left end of the address bar.

  See also:

  • http://www.dria.org/WordPress/archives/2008/05/06/635/
  • https://support.Mozilla.com/kb/site+identity+button
  • http://www.Mozilla.com/en-us/Firefox/security/identity/

  You can use this extension to get a lock on the address bar.

  • Lock: https://addons.mozilla.org/firefox/addon/padlock-icon/

• Unable to connect to the site Web SSL VPN with firewall zone configured

  I recently updated my 2911 company and set up a firewall area.  This is my first experience with this and I used Cisco Configuration Professional to build the configuration of the firewall first and then edited the names to make it readable by humans.  The only problem I can't solve is to learn site Web SSL VPN from outside.  I can navigate the website and connect without problem from the inside, and even if it was useful to verify that the Routing and the site work properly it is really not what I.  I don't get anything on the syslog for drops because of the firewall server, or for any other reason but packet capture show that no response is received when you try to navigate to the outside Web site.  I am currently using a customer VPN IPSEC solution until I can get this to work and have no problem with it.  I have attached a sanitized with the included relevant lines configuration (deleted ~ 400 lines including logging, many inspections on the movement of the area to the area and the ipsec vpn, which I already mentioned).  I searched anything about this problem and no one has no problem connecting to their Web site, just to get other features to work correctly.  All thoughts are welcome.

  See the security box

  area to area

  Members of Interfaces:

  GigabitEthernet0/0.15

  GigabitEthernet0/0.30

  GigabitEthernet0/0.35

  GigabitEthernet0/0.45

  area outside zone

  Members of Interfaces:

  GigabitEthernet0/1

  sslvpn area area

  Members of Interfaces:

  Virtual-Template1

  SSLVPN-VIF0

  I tried to change the composition of the area on the interface virtual-Template1 to the outside the area nothing helps.

  See the pair area security

  Name of the pair area SSLVPN - AUX-in

  Source-Zone sslvpn-area-zone of Destination in the area

  Service-SSLVPN-AUX-IN-POLICY

  Name of the pair area IN SSLVPN

  Source-Zone in the Destination zone sslvpn-zone

  service-policy IN SSLVPN-POLICY

  Name of the pair area SELF SSLVPN

  Source-Zone sslvpn-area free-zone Destination schedule

  Service-SELF-to-SSLVPN-POLICY

  Zone-pair name IN-> AUTO

  Source-Zone in the Destination zone auto

  Service-IN-to-SELF-POLICY policy

  Name of the pair IN-> IN box

  In the Destination area source-Zone in the area

  service-policy IN IN-POLICY

  Zone-pair name SELF-> OUT

  Source-Zone auto zone of Destination outside the area

  Service-SELF-AUX-OUT-POLICY

  Name of the pair OUT zone-> AUTO

  Source-Zone out-area Destination-area auto

  Service-OUT-to-SELF-POLICY

  Zone-pair name IN-> OUT

  Source-Zone in the Destination area outside zone

  service-strategy ALLOW-ALL

  The pair OUT zone name-> IN

  Source-out-zone-time zone time Zone of Destination in the area

  Service-OUT-to-IN-POLICY

  Name of the pair area SSLVPN-to-SELF

  Source-Zone-Zone of sslvpn-area auto

  Service-SSLVPN-FOR-SELF-POLICY

  I also tried to add a pair of area for the outside zone sslvpn-zone passing all traffic and it doesn't change anything.

  The area of networks

  G0/0.15

  172.16.0.1 26

  G0/0.30

  172.16.0.65/26

  G0/0.35

  172.16.0.129/25

  G0/0.45

  172.18.0.1 28

  Pool of SSL VPN

  172.20.0.1 - 172.20.0.14

  Latest Version of IOS:

  Cisco IOS software, software C2900 (C2900-UNIVERSALK9-M), Version 15.0 (1) M10, RELEASE SOFTWARE (fc1)

  Glad works now. Weird question, no doubt.

  I guess that on the deployment guide said that the firewall will not support inspection of TCP to the free zone, however, class nested maps are used to accomplish this, to be completely honest, I think it's a mess and the best thing to do is action past to auto for the protocols that you want and then drop the rest.

  Let us know if you have any other problems.

  Mike

• some images (JPEG format) do not show in Design view, but show in live mode, any ideas why? Thank you

  some images (JPEG format) do not show in Design view, but show in live mode, any ideas why? Thank you

  Work within a site defined in DW?

  All images cropped and size?

  Are all the images for the Web as optimized JPG?

  All images are saved in your folder of Site Local DW?

  Nancy O.

• My site, created using Dreamweaver cs6 shows only partial images. He worked until a few days ago when I updated Java and Firefox.

  My site, created using Dreamweaver cs6 shows only partial images.
  He worked until a few days ago when I updated Java and Firefox.
  The URL is j - f - a.com.au

  The images are not entirely loading or do you have other problems?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  I noticed that some images show at the right end of the window and have set width: auto (right: 0px; width: auto) set the width according to the dimensions of the image (i.e. maintain proportions) and others fill the width full page.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I am wanting to download a site called "fanatical television" but Firefox is saying, it is intended to prevent this... is this website nothing wrong with download?

  As I said above, I'm wanting to download this site as I can, but Firefox is warn me wanting to press the option "stop download". Could someone tell me if it is OK download. I would be very grateful for any advice in this regard.

  See you soon,.
  Genetic resources organization

  http://download.televisionfanatic.com/index.jhtml
  Mindspark EULA More information on this page.
  Whether you need to install this extension, the decision is yours.

  Personally, everything about "Ask" is suspicious of the IMO. I've seen too many requests for support on the removal of garbage-related "Ask" and questions about the restoration of the user or by default set the preferences.

  See this Google search for Mindspark, the manufacturer of that application. Mention of the PUP (potentially unwanted programs) and malware, is sufficient for a reasonable person to think twice before installing stuff like that.

• When I try to bookmark a new page, I don't get the window of "Page bookmarked or edit this bookmark. I t place the site in my favorites, but I have to go to "organize" bookmarks in order to put it where it belongs.

  When I try to bookmark a new page, I don't get the window of "Page bookmarked or edit this bookmark. I t place the site in my favorites, but I have to go to "organize" bookmarks in order to put it where it belongs.

  Which extensions you have installed?
  It seems to me that some sort of 'social bookmarks' extension changed this window edit this bookmark, based on the presence of this line of "Rating" at the bottom.

• Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.

  Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.

  I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.

  I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1

  Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.

• I can't save. Advance registration line but shows only a few peaks.

  I can't save. Advance registration line but shows only a few peaks.

  Hello

  1 did you do any change on the computer before this problem?
  2. which version of the Windows operating system is installed on your computer?

  If you are using Windows Vista I suggest you to consult the following Microsoft article.

  Troubleshoot audio recording : http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-audio-recording-problems

  If you are using Windows 7 I suggest you to consult the following Microsoft article

  
  Open the troubleshooting of Audio recording open the troubleshooting of audio :http://windows.microsoft.com/en-US/windows7/Open-the-Recording-Audio-troubleshooter

  Also see the following Microsoft article:

  Record audio with Sound Recorder: http://windows.microsoft.com/en-US/windows7/Record-audio-with-Sound-Recorder

  Audio recording in sound recorder: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Recording-audio-in-Sound-Recorder-frequently-asked-questions

  Record sound: http://windows.microsoft.com/en-US/windows-vista/Record-sound

• alert security Windows says I have no anti virus protection, but MSE is on and up to date.

  Original title: security alerts Windows sees no MSE

  alert security Windows says I have no anti virus protection, but MSE is on and up to date.  I get no error message and my updates are current.

  It was the Security Center, but I rebooted and the problem is no longer.  Thank you

• I am trying to use Outlook Express to send pages and web sites to your friends but get messages that failed because my p.o. box address is wrong.

  Outlook Express conecting

  I am trying to use Outlook Express to send pages and web sites to your friends but get messages that failed because my p.o. box address is wrong. How will I know what is my mailing address? My other e-mail - but which I access via Mozilla - works fine, account, I cannot send web pages. As always, thank you for your help unfailing. G. R. Davis

  Setting up email in Outlook Express servers:
  http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx 
  Who is your mail server?

• I can install a shortcut to a Web site on my desktop, but when I try to call, it says path or the file is not found

  I tried to install a shortcut to a Web site on my desktop, but when I try to use it, the popup says "application not found". How to solve this?

  Have you already installed and unisntalled another browser?
  When you install another browser and choose the default installation option, the program asserts itself as the default program.

  In Internet Explorer, check the menu Tools > Internet Options on the tab programs that the default web browser is set to Internet Explorer.

  Go to control panel > programs > default programs and select "associate a file type or Protocol with a program. Scroll to the file under 'Name'.url extension and make sure that the default current is "Internet browser". Otherwise use the ' Change program... "button. »

• I tried to insert a password to protect a document that I send. He told me to add a service that I paid for. I'm still not able to protect document and install a password. I went to tools-Protect but he always tells me that I have to pay fo

  I tried to insert a password to protect a document that I send. He told me to add a service that I paid for. I'm still not able to protect document and install a password. I went to tools-Protect but he always tells me that I have to pay for this service after I did. How can I add a password to open my document?

  Hi cj47163119,

  You need Acrobat application to secure your document with password. It seems that you use Acrobat Reader.

  Acrobat Reader is a free service and do not have this option.

  If you have Acrobat subscription, you can download it here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  For more help, see this KB doc: Security with passwords, Adobe Acrobat PDF files

  Kind regards

  Meenakshi

• Trying to open a corrupted catalog extracted from the software recovery but shows 0 bytes.

  Trying to open a corrupted catalog extracted from the software recovery but shows 0 bytes.

  Hi pibo1984,

  As the catalog size is 0 bytes, this means that the catalog has no inside information.

  So I suggest you to please try to work with one another your backup catalog.

  Kind regards

  Tanuj