Utilities airport shows a triangle Orange on Time Capsule, Wifi working

Similar Questions

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• My AirPort Utility is not configure my Time Capsule

  Hello

  I just bought a Time Capsule and trying to set up, but it seems that my AirPort Utility is not set up. He continues to display an error message.

  Anyone have a similar experience and know the solution to this?

  What is the error?

  It can sometimes be a bit difficult.

  If you have an ipad or iphone... iPad is bigger is easier to work on...

  Download and use the version of iOS utility, because it is much more reliable than the Mac one.

  If you still have questions... Tell us available to the entire network.

• my site is SSL protected, but shows a triangle orange. Help!

  my website is protected SSL, but mozilla shows an orange triangle next to the URL. We do a lot of business online and I need my customers to know that their transactions are secure. How can I fix it? (what's new, btw, it was fine until recently).

  I believe that the orange triangle indicates that there is a problem with active mixed content, but you have approved it.

  You can give the URL of the problem page (assuming that a connection is not required), so a volunteer could take a look?

• Airport Time capsule not found

  My time capsule is not backup using time machine. My computer can't find it. Here is the message I get when I try to manually back up:

  The backup drive is not available. Make sure that the backup disk is connected, or select a different backup disk.

  I unplugged the capsule of time and still nothing. I have however reset my wifi last week and this is maybe the reason why I lost the connection? Do I have to reset my capsule? PS. the light on the time capsule is green so its supposed to work properly.

  Ive also tried to manually connect to my backup drive and nothing.

  Can I reset my capsule? What are the consequences of this?

  Thanks for your help.

  Turn off your Mac and your Time Capsule

  Wait a few seconds, then put back them up again and wait a few minutes

  If you open AirPort Utility on your Mac... (Finder > Applications > utilities > AirPort Utility)... appear to time Capsule?

  Time Capsule appears there under the shared position on the left side of a Finder window Panel?

  There is more to do... but these things have to work before you can move forward.

• time capsule airport cannot be opened because the original item cannot be found

  I just purchased a Time capsule airport and can't install. It flashes orange, and although that Time Machine backs up on it, and I can access the internet, I don't remember upward the back-up because I got the following error message:

  "'Airport Time Capsule' could not open the original item cannot be found".

  The printer is connected to the Capsule by USB works.

  I'm installing via an iMac.

  Help, please!

  Thank you

  You first need to determine what is at stake that indicates the LED "blinking orange.

  To make your iMac:

  • Run the AirPort Utility.
  • Select the Time Capsule
  • In the pop-up window, all questions will appear in the status section.

  Please post back your findings.

• Airport utility cannot find Time Capsule

  Airport utility can't find my Time Capsule.

  I tried to reset (factory settings) several times and then reconfigure TC.

  It works for 2 minutes; the led is green and the TC is visible in AU - but while time Machine is looking for the disc and the preparation of the backup, the disk disappears from the to THE and therefore cannot perform a backup.

  Also, the light is still green after the TC disappears from the AU.

  Could there be a problem with AU?
  Or my TC is all just too old? -I do not know what generation it is, but it's at less than 4 years old, maybe 5.

  I have a MacBook Pro running on El Capitan 2012.

  I hope someone knows how to solve this problem

  Could there be a problem with AU?

  No, Airport utility is very good.

  I have a MacBook Pro running on El Capitan 2012.

  Network problem is common... and it's here... El Capo.

  Or my TC is all just too old? -I do not know what generation it is, but it's at less than 4 years old, maybe 5.

  Possibly in combo with this old CT... What model is the basis... A1xxx?

  Or in Airport utility immediately after a reboot... Hold down the option key and double click on the symbol TC. It will open the summary page with the template at the top.

  Have another go with the installation... See below.

  But tell us what is your provision.

  This modem you... brand / model?

  What the TC set, bridge or router?

  Is the computer connected by ethernet or wireless? Have you tried both?

  Here are my suggestions...

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

• My Airport Time Capsule can act as a WIRELESS access point

  Hello.

  I brought a Time Capsule with my Mac Pro. It worked well since yesterday.

  I have set up the time Capsule as a WIFI, bypass at my local network access point. There is a router (cable) works at home.

  It's my Mac Pro AirPort Utility and my iPhone, my Time Capsule is displayed with an exclamation point saying "device not found". I can't connect to the disk on this subject by afp share, or smb. Time Machine function is gone too. He failed trying to connect to the share drive from another computer connected to the time Capsule by cable network.

  But at the same time, WiFi works well.

  I tried to recycle energy. Sharing disk will be available. But if I start the Time Machine backup, it will not be a few seconds.

  Any idea?

  Thank you.

  There are several posts here related the issue.

  Luckily, you have set up your new Time Capsule for Back to My Mac (BTMM)?

  If so, the 'temporary' solution is to delete/disable the option of the CCMM, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

  If you have not enabled CCMM, we have other options for you to try.

• Time Capsule airport problems

  I have several questions, setting up a home network, but I want to start with the problems I have with the time Capsule.

  Until 2 days ago, the time Capsule was working fine.  My setup is the ISP router connected to the Capsule of time and the Time Capsule hard connections on a USB for extra storage and ethernet to an iMac.  Also several peripherals wifi like the pads and phones.  No problems.

  This past weekend, I started to set up a home network by adding an ethernet (TP Link TL SG108E) switch to one of the ports ethernet on the Time Capsule.  Of the switch, I have then several ports around the House (recently redone to include an Ethernet cat. 5) connected now to two Apple TV and a security system at home.  No other device is currently connected to the ports and all connected devices work without any problem.

  The time capsule.  In the past 24 hours, the time Capsule disappeared from Airport utility.  I can see the wireless signal and connect to it.  I use the time for constant Time Machine backups Capsule and continue without any problem.  I can see the Capsule in the Finder, can connect you and the USB that I have connected to the time Capsule, but no time Capsule in the utility.

  My future plan must use two of the ports around the House with Airport Express devices to expand the WIFI, but as I can't see Time Capsule in the utility and I can't install Express devices.  However I tried to put in place one of the Airport Express devices and the process has begun to extend the Time Capsule network, but then I got a message "unexpected error".  So, first thing first, problem of Time Capsule.

  Any ideas?

  Let's first, as you note.

  Your message did not mention if you had done a full Cycle of power network. If you have not already done so, it would be a good fundamental mission of troubleshooting to be performed, because he will give everything a new departure and will often solve a problem similar to what you experience. To do this...

  • Power off all the devices on your network... modem, computers, printers, accessories, mobile devices, etc. in any order you want.
  • Wait a few seconds
  • Turn on the modem and let it run only for 2 to 3 minutes or more if you want
  • Then, switch on the device connected to the modem and leaves turn a good minute
  • Keep power devices one at a time about a minute out until the entire network is back
  • Check the network

  Please report your results

• Airport Extreme and Time Capsule of airport work together?

  I have time capsule and airport extreme. I need to decide if I should sell Airport extreme or is there a way for the two to work together to expand the wifi. Airport extreme can be connected to time capsule and extend the range?

  AirPort Extreme can extend the time Capsule network in one of two ways:

  (1) for the best performance, the AirPort Extreme is located in the heart of the area where most of the wireless coverage is needed, and it would connect to the time Capsule using wired Ethernet wired, permanent.

  (2) AirPort Extreme can connect to the Time Capsule wireless network and to extend the network in this way, if you're ready locate AirPort Extreme to halfway between the Capsule and the area that needs more coverage wireless... And... accept a drop in performance of half of the potential maximum speed on the network.

• 3 TB airport Time Capsule noisy failure

  Airport 3 TB 18 months, my time capsule was much buzzing for a month or two, but otherwise works fine.  Today, he started screaming (rolling noise?) and the light flickered.  Then it should settle.  Then do it again a few minutes later.  Console says this...

  22/02/16 8:39:32.068 PM AirPort Utility [3097]: utility AirPort has been launched/notified by the AirPort Base Station Agent on {}

  APID = 119;

  Flags = 0x8a2c;

  FV = "7.7.3;."

  name = "airport Time Capsule 802.11ac [OF] ';

  prob = OTMPC;

  }

  22/02/16 8:39:40.859 PM AirPort Utility [3097]: Autoquitting as to the problems of the unit have decided themselves.

  22/02/16 9:02:22.289 PM AirPort Utility [3179]: utility AirPort has been launched/notified by the AirPort Base Station Agent on {}

  APID = 119;

  Flags = 0x8a2c;

  FV = "7.7.3;."

  name = "airport Time Capsule 802.11ac [OF] ';

  prob = OTMPC;

  }

  23/02/16 5:26:43.366 AM AirPort Utility [3398]: utility AirPort has been launched/notified by the AirPort Base Station Agent on {}

  APID = 119;

  Flags = 0x8a2c;

  FV = "7.7.3;."

  name = "airport Time Capsule 802.11ac [OF] ';

  prob = OTMPC;

  }

  23/02/16 5:26:52.745 AM AirPort Utility [3398]: Autoquitting as to the problems of the unit have decided themselves.

  I'm looking at a drive problem hard here, or fan?  Time capsules from the airport have the same problem of the anterior capsule hard drive failure rate?

  THX...

  prob = OTMPC;

  Problem = operating temperature = fan not working not not, or doesn't work is not at full capacity.

  Make an appointment at an Apple Store... If you have one near you... or directly contact the Apple Support... Contact Apple for support and service - Apple Support

  The guarantee to the United States on the Time Capsule is 1 year and 2 years in a number of other countries. Apple will replace the device for you.  If the Capsule is longer under warranty but you have AppleCare implemented on one of your Macs, the time Capsule is still covered in this framework up to 3 years from the date of purchase of the time Capsule.

  If the Capsule is not covered, ask Apple to replace the device for you in any case.  If they won't, then unfortunately you yourself, because Apple does not offer repairs or spare parts for the time Capsule. If you are a DIY kind of person, you can open the Capsule and clean the fan or replace the fan. Be extremely careful when you open the time Capsule to shoot components, there are has Ribbon connectors that can easily tear or break if we don't take care.

  Airport Time Capsule A1470 (Mini!) Teardown - iFixit

• can I use one extreme of the airport to connect to a time capsule that is already defined as an Extender?

  I would use my Airport extreme for WiFi signal booster in my office room. I use a Time capsule as a base station and I use a second Time capsule as an Extender. Now, I want to measure my extender... I can get them both to look at my base station.

  

  That's what I have... But I would get my Airport express in series with my Time capsule, it becomes a single string.

• Purchased airport Time Capsule in the USA and the cord specifies 125V. I can hook it up to 220 V?

  Bought time Capsule airport in the United States

  power cord said 125v

  Can I use it on 220 V?

  K Dolega

  Yes, Time Capsule will work on 100-240 v and 50-60 Hz automatically.  So, you may need an adapter to plug the power cord into the wall outlet, but you don't need a voltage converter.

  Some channels of wireless 5 GHz no longer used in the United States are not legal in other parts of the world, so it may be wise to use the lower 5 GHz channels numbered to avoid any problems.

• WiFi work stopped on Time Capsule, but manages to get internet

  Part of our time Capsule Wifi stopped working in our office.  He continues to receive internet because everything that is connected to the internet can connect properly, including our VoIP phone system.  It just seems to be the Wifi on the Time Capsule.  The network will appear as an option on our devices, but when we try to connect, it continues to request the password.  We tried to reset and unplug, but we are unable to join the wireless network.  The time Capsule is two years old, so I don't feel like it should be failed.  Any suggestions?

  WiFi may fail.

  Please do a full factory reset.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Run through the installation wizard in airport utility

  Make sure you only give a name short and simple wifi... No, Apple has recommended. < 10 characters, pure alphanumeric characters.

  for example TCwifi

  Or even give the 2 strips of different names, for example TC24ghz and TC5ghz

  Password use WPA2 Personal, pure from 8 to 20 alphanumeric characters.

  If you still have questions wireless... the TC may be broken.

  If you have applecare on a computer or an ipad or apple TV the TC is covered and get Apple to replace.

  If it is less than 2 years old and you don't have applecare you can always buy.

  Is this more or less 2 years... It is essential... If it is still 1 day less than you can be replaced.

  Buy applecare on any product that you already have still eligible or buy a Gen3 Apple TV... don't open it. Buy applecare for it... get your TC replaced under the applecare... return the apple TV for refund.

• Time Capsule do not pick up address DHCP and cable modem...

  You just bought a Time Capsule and a couple of Airport Express. If none of these devices are connected together via Ethernet, they seem to have set themselves up, and all is well.

  That being said, I tried to create a mobile network instead of pure wi - fi and am studying various behaviors that are not as expected when I rear hub to the Internet Time Capsule, but need to isolate and go 1 bit at a time... (it works not as well as suggest Apple instructions on homelessness of installation)...

  If:

  1. configuration of the modem cable shows that DHCP is 'ON' and supplied address range 192.168.0.x by 192.168.0.y,.

  2 Cable modem wireless is disabled,

  3 Time Capsule Wan is connected to the cable modem, Ethernet

  4 Time Capsule is configured to request its address IP, DHCP

  5. Airport Express is in Bridge mode and have addresses such as 10.x.y.z (appears to be from a Time capsule).

  6. safe as Time Capsule is set to be as DHCP and NAT

  7. There is NO other device in this configuration connected by Ethernet except the cable Modem and the Time Capsule.

  So, why is the IP address of the time Capsule 76.181.45.xyz? (The address is NOT in the range of the DHCP as described in the #1; it is not supposed to be?) ....

  Whence this address?

  A friend says this address puts the "other side" Time Capsule of the cable Modem, directly on the Net?... (Shouldn't worry?) ....

  If none of these devices are connected together via Ethernet, they seem to have set themselves up, and all is well.

  It's because you didn't have the devices connected via Ethernet before you set up the. Given that the installation utility saw a wireless connection, it is assumed that this was the way that you want to connect devices on your network at all times... so he put it this way.

  If you had an established connection Ethernet before you ran the installer, then the utility would have detected this connection and set up the airport to "expand using Ethernet", does not extend to assistance of wireless.

  (it works not as well as suggest Apple instructions on homelessness of installation)...

  If all goes well, you don't talk about this document... Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo... .. Since the 'how' information in this article is at least 4 years late, bear little resemblance to the latest version of AirPort Utility and some of the information are simply not true.  This document if trash is what you... He'll probably do more harm than good with regard to the details of setting.  The article is OK for basic general information, however.

  6. safe as Time Capsule is set to be as DHCP and NAT

  It should not be if your modem is a modem/router "" or type 'bridge' of the device which is also DHCP and NAT services. The fact that you have disabled the wireless on the device confirms that it is both a modem AND a router. That being the case, then you have two devices that both struggling among themselves to try to control the same network... AND do you also have a network error called Double NAT... something you don't want.

  Probably the best at everything again and provide us with the number of brand and model of your "modem", that we can confirm what it is that you have, then the correctly configured time Capsule to work with this device. Once the time Capsule is set up correctly, it will be easy to put in place the other airports.