My 'stop' boolean does not stop my time looping

Similar Questions

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• My new N210 always show "local oscillator 1074118626 does not lock in time.

  Hello

  About error 'local oscillator 1074118626 does not lock in time', I found the thread as here, but in my case, this error only occurred when I used two N210-newly buy.

  When I put the two side of the transmitter, which takes place the error in writing-VI (niUSRP write data Tx (CBD 2D) .vilocal oscillator does not lock in the allotted)

  When I do them as a receiver, that erroor come once again an insider-VI (nuISRP Initiate.vi)local oscillator block does not lock in the allotted)

  I have replaced those two with the old N210 and the error disappear. Why?

  Thank you ~.

  Hi Libby,

  On the firmware and FPGAS, I always make sure that both of them are updated. Thanks for your suggestion.

  Finally, I found the answer to ' why this problem (local oscillator 1074118626 does not lock in time) has occurred "because unsynchronous LO between the two USRP. I had solved the problem after connecting the two USRP with MIMO cable without any change in the LabVIEW code.

  I do not know why the old USRP didn't need this synch thing... anyway... I am pleased that my problem has been resolved.

• My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) what are the troubleshooting steps you tried to solve the problem?

  I suggest you follow the steps in the KB article below and check if it helps:

  http://support.Microsoft.com/kb/968002

  Hope this information is helpful

• Clock-calendar does not maintain the time and date

  The clock-calendar on my laptop does not maintain the time and date after I put it.

  Usually a sign that the bios cmos battery is defective and must be replaced

• Date/clock Windows XP does not correctly date/time

  Clock Windows on the bar of tasks and in the Date/Time tool does not stop so that it starts.  When I stop (rightly), next day start date will be December 31, 2005 and the incorrect time.  Why and how to fix it?

  Clock Windows on the bar of tasks and in the Date/Time tool does not stop so that it starts.  When I stop (rightly), next day start date will be December 31, 2005 and the incorrect time.  Why and how to fix it?

  You are wasting time while the computer is turned off? There is a battery n the motherboard than maintaisns t time (and other things) while the computer is turned off. Almost certainly your battery has failed and must be replaced. The batteries are widely available and very little expensive (less 5 $US). They are also quick and easy to replace, but if you are uncomfortable working with your hands inside the computer case, get a friend with more expeirnce to help you.

• LoadVars does not work every time

  On both my pc offline using less 'test' Flash 8 and GOT 2.0 and on my server host unix.
  
  I wrote a php script that saves the name-value pairs of mysql (Yes! Finally - if you've read my other posts here!)
  photosynthesis = keyword12 & keyword13 = digestion & keywo rd14 = & keyword15 = & keyword16 = & keyword10 = keyword1 & keyword11 = organelle
  
  However, both in the flash using the 'test' environment and by running the swf file after download on my server
  http://www.4themax.com/education/regents_quest/quiz.swf
  
  Sometimes the LoadVars loads and decodes the name-value pairs, and other times does not.
  
  Any idea? I have not discovered anything in the search of this forum, nor in Google search.
  
  The LoadVars AS 2.0 is (which is in the main timeline):
  
  traces have been inserted for debugging the process of development of ACEs.
  
  SQLCache
  var my_lv:LoadVars = new LoadVars();
  my_lv. OnLoad = function (success: Boolean): Void {}
  If (success) {}
  
  Convert the variable string to properties
  my_lv. Decode (my_lv. ToString());
  trace (my_lv. ToString());
  Iterate over the properties in my_lv
  i = 0;
  (var prop in my_lv) {}
  
  trace (prop + "->" + my_lv [prop]);
  trace (i + "prop:"+ prop ");
  trace ("my_lv:" + my_lv [prop]);
  
  i ++ ;
  }
  
  t = i-2; used to search for items of total table because the decoding process fills the elements in reverse order
  trace (t);
  
  } else {}
  trace ("unable to load the external file.");
  }
  }
  my_lv. Load ("sqlcache.txt");
  SQLCache.txt
  
  SQLCache repetition
  var my_lv2:LoadVars = new LoadVars();
  my_lv2. OnLoad = function (success: Boolean): Void {}
  If (success) {}
  Convert the variable string to properties
  my_lv2. Decode (my_lv2. ToString());
  trace (my_lv. ToString());
  Iterate over the properties in my_lv
  i = 0;
  (var prop in my_lv2) {}
  trace (prop + "->" + my_lv [prop]);
  j = t - i;
  _Global.keywords [j] = my_lv2 [prop];
  trace (j + "" + _global.keywords [j]);
  trace (j + "my_lv:" + my_lv2 [prop]);
  
  i ++ ;
  }
  
  } else {}
  trace ("unable to load the external file.");
  }
  }
  my_lv2. Load ("sqlcache.txt");
  SQLCache.txt rehearsal

  I must say thank you G-o-d, but I must say also thank you very much, GWD. It works!

  You can see it at:
  http://www.4themax.com/education/regents_quest/quiz-home.html

  (You need not to connect to make it work. The connection info is to save the test for the diagnosis of the educational process).

  Note: I found that in the database mySQL, which becomes from a php script name-value pairs: a) the spaces become + and load Vars converted them to spaces b)? are not okay - I get

  each data table must have its own variable my_lv, but can keep prop and the same temparray variables for each table

  Thank you, thank you, thank you again!

• Peripheral USB take two tests at work and does not start with Time Machine drive connected

  I have a 2015 mid Macbook Pro 15 "work (so I can't afford to take this service for a period of days). My specs are:

  

  I am running the latest version of El Capitan, 10.11.4.

  My problem is that USB devices - such as Logitech USB headsets, USB sticks, external hard drives, etc. - always and I always say, require two plugins to be detected by the system. It doesn't work the first time. I always have to connect once, remove it and plug it in again.

  In addition, if I try to boot the system with my Time Machine/external USB HD drive, it won't start at all. Only if I reboot without all the devices connected it boot successfully.

  My questions are: is it a software or a hardware problem? And someone saw this before? I think it's a hardware problem, although the last notes of patch involve the last update of OS may have addressed a similar issue with audio devices. (This would affect my Logitech USB headset no doubt, but it did not help). If it is a hardware problem that requires a fix of the motherboard, I can't do it, since the new it's a working machine that I can't part with for a long period of time, unless SHE is willing to trade me a machine on-site. It does not affect other most operation every day except that I need to plug devices twice, all the time.

  Thank you, everyone.

  Try this-

  How to reset the NVRAM on your Mac - Apple Support

  Reset the management system (SCM) controller on your Mac - Apple Support

• My macbook pro does not connect to Time Capsule

  My Macbook Pro has not saved for a few weeks and does not connect to the time Machine.

  Whenever I try to connect, I get a message saying check the IP address. Everything else works - i.e. wifi is working, etc. But for some reason any time Capsule of the functions are lost.

  Please can someone help.

  My operating system is OS X Yosemite 10.10.5

• No service, submenu cell does not start every time

  Hello

  I use my IPhone 5S for a long time, but a week ago something happened and now I can't use my phone because it says 'no service '.

  I tried to enter the submenu of the 'Cell' settings, but whenever I try to click on 'Cellular' he kicks me settings. As an application that has a problem and does not work. Re - download will fix most of the applications, but I don't know what to do about this "cell". I checked common failures when the phone says 'No. Service' that's why I chose to open a topic to discuss if I can fix or repair.

  Is this a common problem? Are there measures to solve this problem? I took my phone to a local store to see if the phone is repairable, he said he has never seen a problem, something like this before. I'll go to the Apple Store as soon as possible, but in the meantime, I would like to find if there is any solution out there that I could try.

  Thank you!

  Restore iOS on your phone using iTunes.

  If this resolves the problem, you have a hardware failure.

• "MIMO cable link does not lock the time limit" error in USRP 2922

  Hello

  I short tutorial teacher Heath experiment, specifically the laboratory 2.1 on USRP 2922 and I came through this error:
  "niUSRP Initiate.viMIMO link cable lock not in the time allotted." with the error code "-1074118624".» I do not understand the error and do not know what to do note that I do not use anything related to MIMO and I don't have a MIMO cable in the first place.

  Can someone help me with this? Thank you!

  Hello

  A possible case where you could get the error «link cable MIMO does not lock...» "If you set the frequency source of reference in mode"Mimo"and that they were not really using cables of mimo or configuration.

• Family fishing does not limit the time on the PC

  I set up time for a user limits, and it does not work

  All the PC just different versions of Windows 7.

  Hi richagpalmer,

  Just to check, you configure the function of time allocation, or the function of curfew?

  Please make sure that you refresh your family safety filter each time you change the parental control:

  How to update the family safety filter?

  In addition, please be informed that the feature of time safely from the family has changed recently. For more information, please see this sticky post:

  How to work the allocation of time and curfew?

  Thank you!

• Windows does not start: every time I type my password it starts to load, but then it freezes

  Help, please!

  • my windows vista family premium does not pass the login window, every time I type my password it starts to load, but then it freezes
  • I already try to restart my computer, but it of not working, now will work in safe mode
  • WHAT CAN THE PROBLEM PLEASE HELP!

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Export markers does not include end time

  I use hearing CC and I created about 3 dozen range markers. I need to export all of my range markers to a CSV file. When I do this, the file does not include the end time. It's just how this function applies, or is it possible to enter the time of the end?

  Below is an example of marker_1 exported to .csv:

  Name	Beginning	Duration	The time format	Type	Description
  marker_1	00:05.0	00:00.6	decimal	CUE

  

  Unfortunately, this seems just the way that hearing export markers. If you want more information, you can use the third-party CueList tool that allows to control many more markers such as editing and renaming to start.

  CueListTool

• Laptop starts randomly (does not start first time)

  I have the HP Pavilion tx1000 for 2 years, he worked normal since now. The problem is - computer laptop starts from the second, third or more times.  When I turn it on, only the led indicators start working drive and hard, but no initial priming and the white screen. Then I would do market and randomly, it starts normally. Then will he charge system works very well. I use Debian Squeeze OS, but think there regardless of the installed system. I think there BIOS problem or a power problem. I know it's hard to help me with this, but hope someone know approximate reason and do me a favor to give a hint.

  s/n {removed privacy}

  p/n GD617AV

  Not exactly. The video chip is on what is called ball grid array. As the chip is overheating and cools down, the connections to the motherboard (i.e. Bay) become brittle and break off, so that there is no full contact with the circuit of the motherboard. It can be "reorganized" so that it becomes liquid and all connection again by applying heat evenly. The trick is to do it at the right temperature and to monitor the process. It can be done by the motherboard in the oven just cooking, but it is not reliable. It works best when you have real expensive equipment, but which does not improve with real expensive equipment?