My usb card reader is not get recognized by my computer more help?

Similar Questions

• USB card reader does not detect memory cards

  memory card

  I do not have a slot for memory card but I have a usb card reader, but it just recently stopped reading all my memory cards? What should I do?

  Hello

  If you can't get the working card reader, you can use a card reader that is
  not expensive.

  -------------------------------------------------------------

  To check your version of Windows.

  Check with the manufacturer of system and their forums (if any) for known issues.

  Your other USB devices work?

  Try a system restore to before the drive stopped working if possible.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• external usb card reader will not read anything beyond 2 GB cards

  my computer is running Vista Edition home premium 64-bit.  When I plug my digital concept 51-in-1 play/recorder card the computer will recognize, if I put in my mic of 1 or 2 GB sd he sees.  But if I insert anything bigger that that the computer sees the card, it does nothing.  So I don't know the card reader works.  I have another computer running the same OS but 32 bits and I have no problem at all.  Could there be a problem with the 64 bit?  Please help... very irritating!

  What is the EXACT make and model of drive?  It is Digital Concepts CR - 75 USB 51-in-1 Card Reader/Writer (if not, why)? So no matter where you had drivers, firmware or software for this devicce or did you just plug it and expect it to work with anything else required (which may indeed be the case, but I suspect not - I just want to know if you have anything to make it more compatible with the system).  Where did you get these files and where is the technical support (web site help - is it Sakar, http://www.sakar.com/contactus.aspx?)  If so, consult the following site:http://www.bestpriceaudiovideo.com/digital-concepts-cr-75-usb-51-in-1-card-reader-writer/.  You'll notice that it includes Vista as OS compatible.  Yes, I know, is to find work on the other Vista machine and it works even partially on this one - but he may still have some problems. "

  I would contact Sakar support http://www.sakar.com/contactus.aspx and discss the issue with them.  They have a simple solution, or they can tell you that you need to install some additional things (and I hope that tell you where to get them) or they can say that there is a problem with Vista 64-bit.  In any case, they know better than we do, and since you are 'install' as plug-and-play, then the issue is not Vista but the device and/or drivers, firmware, or software required for the unit (even if this wan't necessary in Vista 32-bit computer) of the product.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• SDHC card is not getting recognized on the computer

  * Original title: Sdhc card not read - Windows 8.1

  When I insert my sdhc card (and sd cards) I hear a sound that indicates the card inserted but it does not appear in 'the pc', so I can't see all of the photos at all... He used to recognize but not anymore.  I have automatic updates and I ran a diagnosis that shows no problem... the sdhc card works in other lapotops and my netbook old but slow... help please! Thank you.

  Thank you.

  I solved it myself actually... it was pretty easy in the end, but took a little investigating and luck!

  My autoplay (in the settings of the pc) has been set to dropbox... I changed it to open and view files and hey presto, it worked.

  Thank you for your time to answer.

  Nik

• Camera is not getting recognized on the computer

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  my camera is saying that it cannot be found on my computer anywhere what I do?

  Hello

  
  1. what operating system is installed on the computer?
  2. are - what you're talking to webcam?
  3. What is the brand and model of the computer?
  
  Click on the link mentioned below on how to ask for suggestions in this forum.
  http://support.Microsoft.com/kb/555375
  
   
  Run the Fixit and see if the problem persists.
  http://support.Microsoft.com/mats/hardware_device_problems/
   
   
  Hope this information helps.

• my card reader does not

  my card reader does not work on my desktop can someone help

  Hello

  Go to the Device Manager, check the component of SD host adapters to see what. You may be able to download the driver from this site:

  http://www.DriverMax.com/driver/update/SDHost/SDA-standard-compliant-SD-host-controller-vendor/SDA-standard-compliant-SD-host-controller

  Kind regards.

• Cannot get my usb card reader to work because I plugged my new wireless broadband

  HI MY PLUG-AND-PLAY DIRECTED BY ABC PRODUCTS USB CARD READER WAS WORKING UNTIL WEEK LAST I CHANGED MY CONNECTION TO BROADBAND CABLE TO CONNECT NEW WIRELESS I UNPLUGGED AND REPLUGED INSIDE BUT STILL DOES NOT?

  JOHN SOON

  Hi John,.

  1 Windows operating system you are using?

  2 are you facing issue with other devices usb also?

  You can read the following article and try to run the material Fixit and see if it helps.

  Hardware devices do not work or are not detected in Windows

  Hope this information is useful.

• Memory card not seen by Windows XP computer using the USB card reader portable

  I use XP SP2 and have recently had a problem where my laptop does not recognize a card of memory a camera when the USB card reader is connected. It automatically launch an Adobe image management application, but I think that the operating system would still see the USB card reader.

  Hello BSW58,

  Thank you for your message.  We will try to take a look at your AutoPlay settings.

  Plug your camera card.
  Conclusion Adobe once it opened.
  Click 'Start' > click 'my computer '.
  Right click on your card > select ' Autoplay > Adobe is listed as default application?  If so, you can change it here.

  Please let us know if it did or did not help to solve your problem.

  Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Internal SD card reader does not recognize SD card

  I have an internal SD card reader I have ever used before.  I am trying to download pictures from an sd card that I used on my desktop and it works fine, but when I insert in my laptop nothing happens. I went to start / my computer and there is no driver does not list other than my cd/dvd driver. How can I fix it?

  Mini SD cards and adapters are the hassle that I connect
  my phone with a USB cable for uploading photos.

  In any case...

  The card reader should not require no installation. If this is not
  recognized, it can be fried or it is possible, there could be a
  loose connection inside the housing.

  Watch the following video tutorial:

  Install the media player.
  http://www.YouTube.com/watch?v=_LWrxN6W5Bc

• Card reader does not recognize the card when inserted

  original title: card reader problems.

  I have a laptop Acer TravelMate, there is a map on the side drive. I also have a Panasonic Lumix digital camera. problem is when I insert the camera card into the slot on the laptop, there is nothing.  my 1st thought being that I need to download and install a card reader driver. I've done that now, but still nothing.
  I just wonder, being a technophobe (not computer smart), unless im missing something here that is obvious to people who are more experienced.
  Any help would be appreciated

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ========================================================

  If you can not get the card reader to work, it can be replaced or an external card reader is not
  Dear.

  They go bad sometimes. Try these:

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - do use the port USB is enabled.

  -----------------------------------------------------------------------------------------------------------------------

  Control Panel - Device Manager - hard disk - drive SD card or similar - double click - tab driver-
  Click on update drivers (this likely will do nothing that MS is far behind the certifying drivers) then right click
  following the UNINSTALL.

  Now bring the controllers USB - right click - UNINSTALL everything in category one at time EXCEPT
  the category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as
  Although all USB devices that you previously used. Run Options and check the 1st three choices to
  see if one is there. You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
  drivers.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hope that helps.

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day