About light magenta printhead Designjet 130

Similar Questions

• Photosmart C8180 All-in-one: not able to print colors light magenta and magenta

  I bought photosmart c8180 about 3 years as a spare printer. I set up and printed a few pages. A printer was perfectly fine.  Last week, I decided to use this printer. When I tried to print, color photos are released totally foires.  I used the tools-alignment option and received a message that alignment was successful.  A printed page has rectangular bars at the end of the page and a magenta bar as well. He also printed two birds with some magenta color. For me, it's proof that the printer can use magenta colors. However, a self-test page came out without any of the magenta color. Under the color of the light magenta and magenta stars boxes were missing.

  I look at the Forum and find out that some people had the same problem.  It dates back to the years of 2011. There are several experts HP answers to how to solve this particular problem.  However, even if it is from 2011 tread has been always open because these so-called 'experts' were not useful. I tried all - they do not help us.

  I called technical support and representatives of hp told me that they cant't help me because this model is discontinued. They also surprised me a bit telling me to throw this printer.  If this is the best solution for this problem of ink for 8100 Series, then, please confirm as an expert. The thead element has been open since 2011 and I don't know that it's time to shut it down.

  Please, answer

  Hello

  Because the printer is out of warranty, technical support may provide you option to get an improved printer (a different model) with a little low prices.

  There is a problem with the printhead (ink delivery system) that cannot be repaired.

• DesignJet 130: what should look like a NEW Assembly of ink for DesignJet 130 tube to

  I ordered a new Assembly of tube of ink for DesignJet 130 from an online source. The item is marked refurbished. Frankly, it seems not yet to have been refurbushied but just pulled an old printer (but that didn't matter that I was expecting again), but it did lead me to ask a slightly silly question.

  The tubes in a new assembly have preloaded ink in them? I guess not, but when I locate a set of 'new' I don't want to jump to a false conclusion so filled beforehand with ink. I guess they must be clean, dry, seems to have never been filled, and not overflow but I thought I would check.

  I'll get my money back and try again. I guess there are some spare parts new surplus stock for this printer floating around. I was wrong in my assumption?

  Concerning

  New tubes of ink are empty, I installed came with setup printheads.
  
  If my post is solved your problem and click the accepted as button solution under him.
  
  In order to thank a Tech for a post click the thumbs up button under the post.
  
  You can even click on the two keys...

• Designjet 130: Two printers Designjet 130 do not print with Windows 10

  I have two printers Designjet 130. Both work fine with XP/Vista/Windows 7. They do not work with 10.

  I spent 20 hours trying to get these things to work with no luck. I tried TWO different machines running windows 10 does not. These printers are running via a USB connection.

  I can install, make the printer by default and PRINT TEST page! I can also print from the HP Scan DR who assures me that all is well. However, when I go to a program such as Notepad, they will not print. Notepad returns an error "The deal invalid. I tried researching this message, but it leads to good spirits more that I can understand.

  My machine is a processor Intel X 5960, 32 GB of memory and a motherboard Asus x 99 Deluxe.

  I tried to launch the installation of the HP software in a variety of modes compatible with no luck.

  I'm out of ideas other than to roll back my 7 software, which I really don't want to do.

  Thanks in advance.

  Ok. I finally solved this problem. I went to the HP site and even ONCE downloaded the driver Designjet 130.

  Download driver on Dec30, 13:34 had a 2 652 k file size

  Today at 11:53 driver has a file size of 3099 KB.

  Maybe they (HP) fixed.

  Maybe my original upload has been altered.

  Very simply:

  Connect your printer. Windows will find and automatically install the USB printing as well as a device driver option. This driver won't work, however, you end up being able to print a test page. This ultimately will always be a false confirmation. The driver version 7.00 is for Vista, Windows 7 and 8. It doesn't work in either compatibility mode.

  Go ahead:

  Go to devices and printers.

  A series of beautiful graphic icons opens.

  Double-click your printer.

  Double click on "customize your printer.

  Go to the about tab.

  Check your installed printer driver version

  10 Windows will install default v7.00 and will keep you in saying he has the best version

  available. Don't believe that.

  The Hewlett Packard scanner DR software will tell you the same thing.

  Do not think that either.

  You want to version 8.10. It is available on the site of HP in 32-bit and 64-bit versions. Download it. I unzipped in a folder on my desktop.

  Now, go to the Device Manager.

  Scroll down to "printers". Click on.

  Right click on your printer.

  Click on "Update driver software"

  Do not click on the first option by default.

  Do not click on "Browse my computer for driver software".

  Click on "Search for driver at this location software '-specify the folder on your desktop and select"include subfolders. "

  Click Browse. The software will make a satisfying update.

  Return to the file "Devices and printers" and the option "customize your printer.

  Double-click. Return to the 'About' tab and confirm that driver version 8.10 is installed.

  Close to everything and to print something.

  Just to check myself, I printed my second document to confirm a nagging doubt.

  The impression is confirmed. Good year for me and anyone else reading this.

• HP Photosmart C6280 prints not Magenta or Light Magenta even with new ink cartridges.

  Our HP Photosmart C6280 has always produced excellent results, but all of a sudden it won't print Magenta or Light Magenta, although they show of 75%.  We even tried to put in new ink cartridges, but they still does not print.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  HP - Photosmart C6280 - Product Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart C6280<- set="" to="" your="" version="" of="" windows="" for="" the="" proper="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  These might help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Designjet 130

  I need driver for printer HP Designjet 130 (Windows 7 x 64)? where can I get it?

  Hi Victorua,

  Here is a LINK you can use to get the drivers and software for your printer.

  Let me know if this solves your problem!

  Thank you

• Is HP 02 Light Magenta HP 02 Light Cyan being abandoned?

  I have this saying at a local Walmart and want to confirm if this is true? »

  Wal-Mart may choose to discontinue carrying the HP 02 Light Magenta and Light Cyan but HP still offers them.

  HP actually rarely ever stops a cartridge.  HP Thinkjet original cartridges are available for another thirty years after the introduction...

  

• About light amber extreme airport

  Hello

  Last night out of nowhere my AirPort Extreme which I had for about a year and a half had the blinking yellow light. I was able to reset, but I'm curious as to what may cause this?

  6.3.6 on a Mac under v10.11.5 airPort utility

  And running the utility AirPort 6.3.2 on a Mac v10.9.5 (no update available)

  What is the different versions of the cause AirPort Utility?

  My AE is connected to a modem XFinity...

  

  

  Thanks in advance!

  Carolyn

  Yesterday, Apple released updates firmware for routers from the airport. The yellow light flashes when an update is available.

  Have you updated your AirPort Extreme Version 7.7.7?  If this is not the case, the flashing yellow light will remind you again in another day or two.

  Open AirPort Utility.  If you see a button update, click it.

  

• Question about lights LED R7000

  Question about this quote from the Manual: "when the router is turned on, the light during approximately 10 seconds and then turn. If all lights lit, this indicates a fault in the router"my router lights LED is turned off. Are they supposed to? I discovered how manually to disable using genius. NETGEAR Nighthawk AC1900 is defective?

  I think the manual means just that at first they all turn on, then off for a few seconds. LED lights depending on what services are available.

  The power light should stay lit. Port LAN LED come on if a device is connected the WiFi LED (Amber on white, 100 M, 1000 m), are we if the radios are turned on. The Wan or the internet LED lights up if there is a connection to the internet. Some of them you can turn off via the user interface, but it is handy to have on so that you know the status.

  It looks like your router working normally.

• Designjet T120: T120 - sustainability of the printhead Designjet

  Consider buying Designjet T120 for a small office, where my question:

  What is the sustainability of the print head? (how many pages can be printed)?

  With almost all designjet hp I've seen over the years, the print head life is never determined by the number of pages. There are just too many variables.  Unlike most printers Designjet the T120 T520 doesn't have a separate print heads, but is rather a unit and is replaced as such.  I have not heard or seen any problems with the printhead on this model, so I guess that it will last several years.  With printers Designjet most lack of use is the cause of most of the problems with the printheads.  Also do not have the cart placed above the service station causes problems.  Example the belt has a problem for the plotter stops in the middle and the user plan nor get the fixed tracer for over 2 weeks.  This has a detrimental effect on the printhead (s) as they tend to dry out when not capped.  The correct use and fairly constant use of designjet keep the printheads for years.  I have repaired several hp Designjet printers where the print heads are more than 10 years and still works fine.  However I maintained Designjet printers where the print heads spoil in less than a year with most of them in the latest, due to lack of use.  I also perfer for guests to leave their tracers on all the time.  Less stress on the components as they go through many electrical test when the first being enabled.

• Printhead Designjet 111

  Hi people!

  IM new to this forum and have a bit of a problem.

  I just changed the yellow in my machine print head because he started bands. Once in a new, is not printing at all. There is nothing on the front panel flashes to show that I have a problem. So, just for fun, I put the old back in and still the same, no ink. Sorry for sounding silly, but is - it possible that a 'pump', or something of this ink from the print head pumps gone bad?

  I hate the idea of that something big went wrong shot, because I use this printer for about 5 years with absolutely no problem.

  Thanks in advance for any help.

  chuckj

  This forum focuses on the level of consumer products.  For the Designjet that you can have better results, post in the forum HP Designjet here, this is where the Designjet experts.

• Designjet 130: Bland green to blue

  I am trying to print a banner 24 "x 72" (plain paper) with a green background. What impression it fades to blue. The point where starts fading is different.

  Initially I thought that the yellow cartridge and print head may need to be replaced as blue + yellow = green. But I am able to print Yellow without problem.

  I replaced the cartridges/printheads, aligning the print heads, calibrated color, physically cleaned areas of ink myself (slightly) and a lot, a lot restarted and printing tests.

  If anyone can provide advice, suggestions or directions, I would be very appreciatve and grateful!

  Thank you very much

  Return to the print head and you'll see the stem that fits into the rubber on the front of the truck part.  You need something small with a PIN at the end to fit into the rubber part.  You then draw the ink with the syringe.  Remember if you can't draw handwriting, where the needle will not move again to draw it, then the tube is clogged and you can be out of luck.  Some people in this case use the same syringe to force a small amount of windex in the tube and let stand for a few hours to see if it opens the tube.  Good luck.

• Equium A300D - question about light mouse pad

  Hello

  If someone could help, it is not so much a problem, but I recently bought the Equium A300D and there is a band of light above the mouse pad that are turned over.
  I don't know if I turned it off in some way or how to turn it on, just kind of hoping that someone might be able to help.

  Hello

  Thanks for the comments.

• Request for help with my HP Designjet 130 printer

  Greetings,

  I have owned, loved and used my printer Deskjet HP130 for sixteen years now. I do not use and would like to know if you are able to exchange for another product of your company (HP - printer, laptop or other digital material).

  My contact (deleted content)

  Kind regards

  Paul then

  You must search the HP of the trade program in and then see if there is an another DesignJet you would like to have.

  HP generally offers commercialized ins on upgrades in the same line of equipment.

• Re: Cyan/Cyan/Light Magenta / Magenta clear does not print

  Same problem:

  HP Deskjet 3055A - J611n e-all-in-one printer

  Black was exhausted, so I used the color for a few weeks until what he missed.  Bought a pack of double cartridge at Staples, (numbers, 301 + 301 C UK) real HP not refills.  No instalation problem black works very well, but shows 0% Cyan color.  Other colors 80%.  Bought a new different sourse cartridge, online, HP, still the same problem with the new ink.

  Hey @ivonhoch,

  Thanks for getting back to me on this subject. Because you have already tried two cartridges lights and upgraded the Firmware without success, the next step would be to perform a reset of programming full semi on your machine. I will send you a private Message with instructions on how to perform the reset. Please check your private Messages for instructions.

  Good luck!