My Win7 loses contact with the active screen

Similar Questions

• Satellite Pro P200 - 1KE Vista loses contact with the second internal HARD drive

  Vista Business SP2. I have a Satellite Pro P200-1KE, with two 160 GB drives: a Hitachi configured as C: (operating system, programs, etc.) and E: (data, other programs). The second is a Toshiba MK1637GSX. This little about it and nothing of any importance and is normally configured as d. Unfortunately this hard drive has now become invisible to Vista, although it is still recognized by BIOS and Device Manager. In managing computer does not appear in the list in the upper pane, it comes without a letter from reader below. I have tried everything I know to get recognized, including the following:
  (In no particular order):

  * Remove computer - managed, reset as a single Volume: it always fails
  * Reformat to NTFS using Linux GParted or utility disk Linux (via a USB stick with Linux ice Peppermint on that nerd), sometimes combined with the restoration of the system - it works, but only for a single session. She always disappears again when you restart
  * Remove the driver from Device Manager and pointing plug-and-play with Windows System 32 and Windows Update - which seems to return the driver - but does not recognized disk, unfortunately
  * Meanwhile, throughout all this, Vista insists on finding a driver for "unknown device" that she sometimes found and (allegedly) installs and sometimes find one fails to install.

  Bah!

  Anyone know anything else I can try - preferably without having to reinstall the entire operating system, or run the risk of using Toshiba Hardware Setup that does not seem to come with all the instructions and enigmatic, who wonder if I want to delete stuff 'selected', without showing me what kind of things I am alleged to have selected for removal!

  Best
  David

  If this second HDD is not so important to try to start the original installation disk Microsoft (Vista or Win7) to see if the second HDD will be recognized for the installation procedure.
  You can also try to install Win7 on this second HDD to see if the installation is correctly finalized. Later, you can check if you can start the second HARD drive preinstalled OS.

  Test just to see if this problem is related to Vista only.

• Windows mail the filler of unique active automatic name for a day or two after the last contact with the person.

  Windows mail. Filling of unique active automatic name for a day or two after the last contact with the person. After that, I have to manual search in contacts. Is this normal?

  Thanks in advance

  Hi Abbeypiece Ltd,

  The feature of AutoComplete in Windows Mail doesn't seem to use the Contacts folder. Instead, he uses the history of most recently used contacts.

  For more information, you can consult the following article:

  Change Windows Mail send settings

  Hope this information is useful.

• I can't active my lightromm, the message says "not in contact with the internet", but the net is nice and I can't open other bridges soon

  I can't active my lightromm, the message says "not in contact with the internet", but the net is nice and I can't open other bridges soon

  Hi forrestfan,

  If you use the Windows platform, please try the steps below.

  1 reset the Internet Explorer settings to the default value.

  Reference: change or reset the settings of Internet Explorer - Windows help

  2 reset the Windows hosts file.

  Reference: https://support.microsoft.com/en-us/kb/972034

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Help! Stuck on the activation screen

  Hello

  My grandmother recently asked me to 'fix' his iPad as he kept prompting you to enter the password of his apple whom she did not know ID.  She is 75 years old and bought the iPad two years ago. The iPad uses a recent version of iOS (not sure it exactly, but certainly later than iOs 7).

  When I went into the settings I saw that the Apple - ID for the purposes of this post "[email protected]" - has been used.  Or my grandmother or I knew the password to this ID from apple.  It hurts (and I appreciate this has been my big mistake) thought that the best way to solve this problem was to reset the iPad to its factory settings and then it let me enter a new Apple ID that I have created for her.  Of course, it was the wrong thing to do, but I didn't know it at the time.

  So I reset the iPad and then, when I started, I was introduced to the activation screen it says something in the sense of "this feature must be enabled using the apple"[email protected]"ID."  My grandmother had only an e-mail address in his life, so it must be the identifier apple "[email protected]" that I mentioned above.

  Thus, after a long effort, I managed to understand the email to the email account for the @bigpond.com of my grandmother, then joining I was able to change the password of the apple "[email protected]" by using the function "forgot my password" ID on the official website of apple.

  Now that I had the password "[email protected]" I went back to the activation of the iPad screen and entered the Apple ID and password... only to be tackled with a pop-up message stating something along the lines of "iPad cannot be enabled with this account".

  I don't know what to do now.  My grandmother never had an e-mail address in his life, and the iPad tells me that it requires the ID "[email protected]" to activate it.  It must be the ID '[email protected]' because she never had a single e-mail address and the clues given (for example, "[email protected]") corresponds to "[email protected]".

  I'm completely at a loss what to do from here.  My grandmother has no receipt when she bought the iPad and neither can afford to buy him a new one.  Any help would be greatly appreciated.

  Thank you, Tom.

  If I understand what you're saying correctly, and I think I do, just because you successfully reset the password for Apple ID your grandmother, does not mean that it was the e-mail address that was used to operate the device of origin. Is possible that someone else it enabled for sound using their Apple ID?

• Follow the sliders on 4 screens 2D in SIGHT - but how can I get the coordinates to display for each instead of just the active screen

  If DIADEM will bother to follow the cursor on all pages in a journal, I think that there is a NON-SCRIPT way to view the values of Y for all.

  My graphics are aligned to the x-axis (couple), 4 - poster (1 for each rpm, HP, power and efficiency), and 2D 10 parcels on each of 4 screens in DIADEM 2010.

  Shows that the box show the active screen coordinates and others are grayed out.  I played a bit with the "cursor settings", but which generates the same although I add appears in the dialog box "coordinated".  I guess it may have something to do with making it automatic, but I see no way to change this and how I assign it to a channel?

  On another note, I want to be able to synchronize all 4 graphs to be on the same plot (legend) track above and read the same data.  So if parcel 1 is selected in the display of RPM, then the other, three will also be on field 1.  I guess it had to be done programmatically, but if not, I'm all ears.

  Hi Tweedy-

  No, you cannot use the .NET code directly in tiara.  I don't know what is the point in suggesting it, because it would require a significant change to be able to use a similar code in DIAdem.

  Have you tried to use the legends of the VIEW?  Expand the legend for each graph, and then double-click the legend, how you can configure what information is displayed on each curve.  By default, the legend displays the name of curve, curve units, X-Position (the cursor) and (the slider) Y-Position.  Do not hesitate to complete or the contract depending on your preference.

  After having developed each legend, switch to slider Curve and you should be able to see the Y Position of each curve, fully synchronized.

  

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• my computer loses contact with router

  my computer loses contact with my router and I have to unplug my router, then start it again until the computer connects more frequently. It's moe that happens and more frequently. It does not happen with my ipad or kindle. How this can be fixed.    Richard

  See if there is updated firmware for the router. Try another ethernet cable. If youre talking about ethernet

• Computer is stuck on "Microsoft Corporation" logo with the on-screen scroll bar, a green.

  Hello

  I had difficulties to get my computer past the "Microsoft Corporation" logo with the on-screen scroll bar, a green one.

  I searched the forum and found others who have had this problem. I tried some of their proposals, but eventually Windows does not run on my PC.

  It seemed a moment have solved the problem, but my AVG security had been removed. When I arrived the AVG security working properly my computer starts a few times more, but now I'm right back where I started.

  Is it possible for me to turn this thing on, but not in Mode 'Safe '? I am sick and tired of trying to connect, or try to understand this problem.

  I wish I could just take my computer to where I bought it and get my money back. Unfortunately, the warranty period is exhausted on my PC, so I'm stuck with it.

  I use Windows Vista Home Premium 64 bit, I don't know if that makes a difference?

  Any suggestion would be appreciated.

  fq283

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How to get the active screen of the BlackBerry application?

  Hello

  I'm trying to get the active screen of the BlackBerry application, for example the home menu.

  I tried to use the screen ActiveScreen = getUiEngine () .getActiveScreen () in my code, but found error during execution.

  I know that this is because the getActiveScreen() method applies only for screens created by this application.

  So is there a way to capture the screen of the other application, for example the mail filter BlcackBerry?

  Thank you.

  Not wanting to not to repeat me, but there is no general way to get access to the Screen of another application object, unless you are on good terms with this application - which basically means that you have access to the instance UiApplication.  You cannot ask the operating system to get that to you, you must have a way to get you.  Which implies execution of something in the context of the Application.

  Even in this case, you may not be able to do what you want.  You will probably need to iterate over the screen and content managers and find the field you want, and even if it covers anything you understand (like BasicEditField) it still cannot handle standard things like setText in a way that is useful to you.  And you might not find fields you recognize, if you access a browser screen, I think you'll find there \are RIM not standard fields in there, so there is nothing you can interact from a standard application of the RIM.

  If you want to do this kind of treatment in General, that will deal with in a number of applications, you should watch event Injection.

  There may be other options for specific applications.  For example, you can simulate of electronic mail by writing a program that sends an email, rather than interact with the BlackBerry.  Or for the same application, if you try to test the headphones, then the listener has access to the UiApplication.  Aye, we be able to help you find approaches less General in some places, if we understand what you're trying to do.  This is the reason for the specific question that I asked in my last post.

  Regarding your second question

  "Another question is, can two separate applications of myself interaction by the user interface?

  For example, to call app2. ButtonField.click () or something. »

  It is in fact just an extension to your first question.  The difference is that you will find the UiApplication associated if both applications are on good terms, in fact you can "spend" the UiApplication via a Global event.  Once you have the UiApplication, you can use

  .invokeLater (...)

  to run the user interface code in the other Application.

  But I look at injector event because I think it might be a more general solution.

• Windows 7 computers lose trust with the domain.

  Windows 7 computers lose trust with the domain.  I need one real trouble other than a work around.  My computer Windows XP are very good.  I have to update my domain controller?

  I have remove the field and re-add-the computers throughout the day.  I have a hospital with an increasing amount of Windows 7 computers and my technicians wasting time doing this?  Anyone has any ideas or can help with this?
  Is there a setting on the domain controller that can be activated for this problem?

  Hi, Koldy,

  Try the solutions proposed here:

  Computer remote windows 7 has lost the trust relationship with the domain

  http://social.technet.Microsoft.com/forums/en-us/winserverDS/thread/2d726215-4B97-4e64-9657-98dc106dffbd

  The trust relationship between this workstation and the primary domain failed - Windows 7 Enterprise joining the 2008 domain, error 5722

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/8155d5ea-a5c2-4306-8d2b-be3464234460

  For more assistance, ask your question to the TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• AFTER I CHANGED THE CONFIGURATION IN MY PC FOR WIRE NET IE IS FIREFOX OK NO CONTACT WITH THE NET

  I CHANGED THE NET WITHOUT WIRE-TO-WIRE ON MY PC INTERNET EXPLORER IS OK BUT FIREFOX
  NO CONTACT WITH THE NET HOW TO FIX
  WIN 7

  Firefox cannot load websites but other browsers may

• Problem with the main screen of firefox

  After the update of firefox to firefox 15.0 16.0.2's problem with the main screen. At the top of the main screen displays the bar (caption bar of the main form) that I have win xp and under this title is bar legend like win 7.

  Firefox is running on Windows Xp, if better, I can send the screen, but I don't know where is possible add image to this error report...

  Okay, the problem has been resolved, problem was with the Tab Mix Plus extension. I have an older version of this extension, because at work may not update directly, because I'm going to the Internet via a proxy. Download, update firefox extension directly through the proxy is not possible... I need to download via the other internet browser, in order to not do it often...

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?