My windows 8 pro machine does not connect to my windows 7 pro machine

Similar Questions

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

  Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

  Use a static IP address and see what happens.

  How can I configure my static IP address?
  http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html

• My macbook pro does not connect to Time Capsule

  My Macbook Pro has not saved for a few weeks and does not connect to the time Machine.

  Whenever I try to connect, I get a message saying check the IP address. Everything else works - i.e. wifi is working, etc. But for some reason any time Capsule of the functions are lost.

  Please can someone help.

  My operating system is OS X Yosemite 10.10.5

• Satellite Pro A100 does not connect to the internet if the power adapter is plugged

  Hello
  I have a Satellite Pro A100
  The machine will connect to internet on battery OK. However, if the power supply is connected it does not connect. Any ideas?
  See you soon
  Jim

  Hello

  How do you connect to the internet? With the WLan or cable LAN?
  It s very unusual as the intermits connection when the power adapter is connected.

  This question appears because you buy the laptop?

• With PFS disabled or active, it still does not connect while using Windows 7.

  With PFS disabled or enabled, it still does not connect. Is this a common problem with Windows 7 for the IP Sec gateway to gateway VPN connections and/or does anyone know how to get this working?

  Hello

  For assistance on this issue, you can post your question in Windows 7 IT Pro Technet Forums.

  Network Windows 7

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Centro does not connect to the synchronization with Windows/Palm HotSync

  My Centro ceased to sync with my Windows XP computer.  It just does not connect.  Did the soft reset, restart windows, etc.  No problem in Device Manager.

  The value of sync with outlook on the exchange server data.

  Same Centro and sync cable fine on the Linux machine using gnome-pilot and lines of development to access the same data exchange.

  Assuming that you can navigate through your windows machine.

  1. open Device Manager
  2. when your device is connected, you will see palm os handheld
  3. click straight and say to uninstall the driver
  4 disconnect your device and soft reset it
  5. reconnect the appliance and leave it to reinstall the driver

  This will force reinstall the driver and also tell us if there are errors with the driver.

  Message relates to: Centro (Sprint)

• MacBook pro running on IOS 10.11.5 does not connect to wifi on its own.

  My macbook pro does not connect to wifi instantly and sometimes not at all.

  While he looks for the networks, if I click the wifi icon, it shows my network wifi under 3 bars in the list of wifi, but even if I click on my wifi, it continues to search without connecting to it. After that it seeks for a while, it connects sometimes, but most of the time, a new screen will be pop up saying please choose a network and it will show my network on the list. If I click on my network and tap on connect, it will connect instantly.

  to connect faster, give less to think about:

  

  then ruthlessly prune this list select everything except your home network and use the [---] button to remove tham all except one that is important for you at this time.

  

  .

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• I have not done an iTunes sync in almost a year, and since that time have installed Windows 10. iTunes now does not connect with the iPad. Any suggestions?

  I have not performed a synchronization of the iPad to iTunes in almost a year. Since that time PC now works Windows 10, iTunes does not connect with the iPad or the iPhone 6.  Any suggestions?

  Thank you

  To work with iOS 9.2, you must update iTunes to 12.4 v.

• A6210 adapter does not connect on 5G (Windows 7)

  I would be very grateful for any help on this problem. I have an I7 computer running on Windows 7 with a Netgear A6210 wi - fi adapter and a modem router Netgear D7000. The router is new and seems to be working on various appliances on 2.4 & 5 GB. The adapter is older and works brilliantly on 2.4, but has all sorts of problems to 5 GB. He also had problems on 5 GB on a previous Netgear modem.

  Most of the time he appears to connect at a good speed (867 MB) but most often fails to get an internet connection. In practice, I'm not sure it connects in fact since I have difficulties to access the router or my SIN cable on the router. In my view, there are occasions when I got the internet on 5 GB, but I played with it so long, I'm not sure.

  I installed the latest driver for windows for the adapter (vsn 5.1.22.0) and it made no difference. When I use windows diagnostics considers what it takes to reset the adapter - but even after doing it still does not connect to the internet. Change to 2.4 GB connects quickly and works every time. NETGEAR genius tells me he's working on channels 9 & 13 to 3 bar strength and about 300 MB/s on 2.4 GB and channel 36-48 to 5 GB with a force of 4 bars and 867 MB / s.

  I would be very grateful for all suggestions finding a way forward. I have no hair left to pull and closer me logging of all products netgear in the trash!

  James,

  Thanks for your reply. In fact, I tried what you suggested, but it has not solved the problem.

  However the problem has since been resolved by going into the modem and changing channels 5G of the numbers (36-42) low to high (100-112). This seems to have solved the problem with the A6210 adapter that connects now on 5G without problem and still works with other devices.

  Interestingly, the two laptops were 5 G connection without problem from the same location as the card and are still. So I have no idea why this change has worked-, but he did.

  Thanks for your help

  Alan

• MacBook Pro 13 inch: Mac Pro does not connect to 5510 e printer

  I have problems connecting with one of my printers.

  My iMac will connect with my printer (an HP Photosmart 5510e and Photosmart 7280) wireless without any problem.  My 13 inch (2009) MacBook Pro connects to the 7280 wireless but does not connect to the HP Photosmart 5510e device.

  I recently had to restart my MacBook and reconnected it to a printer without any problems.  I can't find the driver for a printer so I don't know if the 5510's could not reload when I did the reboot.

  Any suggestions as to what I should have fact/do to recover from the situation?

  @Hahti

  You have installed the driver yet?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905

  REO

• HP Officejet 6700 Premium suddenly does not connect to my Macbook Pro more

  Hey everybody,

  I got my HP Officejet for over a year and it has always worked perfectly. It has a stable wifi connection. Yesterday, all of a sudden the printer did not respond, so I asked my brother, who is the type of an It'er and removed the printer from the "Print & Scan" system preferences. Now, however, it will not be added more. As I said, it doesn't have a stable wifi connection, and I can see the presence of the printer when I click on the plus to add a printer, but then, if I want to add it, it says "cannot communicate with the printer at this time." I rebooted the computer laptop and printer and even left stop for the night, but it does not work. Nobody knows anything else to try?

  Thank you very much in advance

  Hi Elizaanne,

  I understand that you are having problems with HP Officejet 6700 Premium does not connect to your Macbook Pro.

  The router must sometimes be recycled.  I unplug the router, turn off the printer, shut down the computer.

  Turn on router wait 5 min and turn on the printer and the computer.

  Check the printer if the Wifi is STRONG.

  Open Preferences system, Print and or print and scan pane. If you see the printer listed
  Click Printer button remove. It will ask for confirmation to delete printer.
  Click on add it or + button, select the MFP Hello not Fax. Adding that should update the drivers.

  If the Wifi of the printer is not fixed, you will need to reconfigure.

  1. Press the power button to turn on the printer.

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer