My windows update stopped working, this error D 8007041

Similar Questions

• Windows Update stopped working.

  I have the 64 bit version of Windows 7 SP1 installed on my laptop [Dell Studio 1747 with processor i7 4 GB RAM & 750 GB hard drive.  Windows Update stopped working on my machine.  All updates through April 19, 2016 have been installed.  I already did the following:

  (1) installed the previous images dating back to several months

  (2) only run WindowsUpdateDiagnostic.diagcab to get error # 0 x 80070005 several times

  (3) race reset Win Update.bat unsuccessfully

  (4) run MicrosoftEasyFix20179.mini.diagcab without success

  (5) I tried install subinacl.msi and runs the recommended Reset.cmd file

  (6) installed WindowsUpdateAgent-7, 6 - x 64 .exe

  All the latter were applied as suggested on the Microsoft Support Website.  None of these maneuvers in addition to the various applications of my antiviral software and malware, brought any resolution of the problem.  I would appreciate any suggestion short of a new facility, because I can't seem to find anywhere, all the new boards.

  I don't know what worked, but Windows Update started to update itself again.  What I don't have, though, was to limit the number of updates, I got the update at some point, less than 30.  I read a post at one point noted that a large number of updates may increase the risk of errors of download and installation.  I had some mistakes on the first download, but those corrected when I download tracking the rest of the updates.  I do not wish that Microsoft would create a repair or update protocol independent site, because it seems that this is not an uncommon problem.

• Windows Update stopped working Windows 7 64 bit

  Hello

  I'm currently under Windows 7 64-bit and Windows Update stopped working. When I open Windows Update and click on ' Check for updates ' I get an error message stating "Windows Update cannot currently check for updates, because the service is not running." "You may need to restart you computer. After the restart of several times there is no change. I use Vipre Antivirus and Windows Firewall, I think. Any help would be great.
  Thank you
  Doug

  Deletion of c:\windows\softwaredistribution\datastore\logs\edb.log

  Reboot and try...

• "HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING" THIS MSG TO POSTER AT STARUP WINDOWS

  "HOST PRECESS FOR"HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING"THIS MSG TO POSTER AT STARUP WINDOWS.

  WHAT THEN THIS WINDOW WILL STOP APPEARING?

  Hi yogesh,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, you get a boot error message.

  This problem may occur if there are incorrect settings in Task Scheduler.

  Perform the steps mentioned below and see if it helps.

  a: Start Task Scheduler type in the search box and click on enter.

  b: Expand and go to the Task Scheduler Library -> Microsoft -> Windows -> CARS.

  c: Click the View menuand then enable Show hidden tasks (so that a check mark appears next to it).

  d: Right click RACTask (Windows 7), and select disable so that the status appears as disabled.

  Answer to us if you are having problems with the message error starting or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.

  When you try to use windows update I get this error: error number: 0 x 80070424.  In addition, automatic updates in Security Center is disabled, and I can't activate it.

  Tre,

  A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50686.msi.

  `~`

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>
  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit 50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  Please let us know if it did or did not help to solve your problem.

  If this ANSWER helped, my post as ANSWER of marking close your thread.

  06/26 / 1108:34:03

• APPCRASH svchost.exe_wuauserv - Windows Update stopped working - Vista Ultimate x 64

  "Windows Update has stopped working" - exact error message. I spent three months of reading the forums, looking for answers and applying diligently solutions - which none have worked - of course :)

  This is not the problem of BITS. Yes, I also tried sfc/scannow. This isn't a new installation of Vista. Latest updates of success were 24 January

  The error relates to: APPCRASH - svchost.exe_wuauserv
  Exception code: c0000005
  Exception offset:... 001029cd

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: svchost.exe_wuauserv
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Default name of the Module: c:\windows\system32\wuaueng.dll
  Fault Module Version: 7.2.6001.788
  Timestamp of Module error: 48f7aab3
  Exception code: c0000005
  Exception Offset: 00000000001029cd
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 7177
  Information additional ca 7 1: 6
  More information 2: f5301b6cae295bf8a2fa5c4797c21e55
  3 more information: 53dc
  Additional information 4: 2655659e60e9fe4d553a061dcca31137
  (in print manually so Colocation errors above)

  Please, I am desperate to solve this problem and finally get secure windows-without even reinstalling Vista :)

  Thank you very much

  Hello ms_frustrated,

  I recommend that you perform a repair installation.  It would be the fastest way and repair you the computer and while still keeping your documents.  PLEASE SAVE YOUR SYSTEM VISTA FIRST.  The link below explains how to perform a repair installation.  After your installation, verify that Windows update works before installing anything.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/58ed3b94-D603-4FEC-83CA-b3d15d1275b8/

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update stopped working on Vista (Ultimate). Error code is 80070005. Difficulty?

  When I go to Windows Update and click on ' Check for updates ', the display shows "Windows could not search for new updates", than he has ever been a check for updates and have never been installed, but the latter is false, as I received it regularly until recently. Of course the possibility to connect to the updates server was lost. A part of the Vista operating system is damaged? Recently, I uninstalled McAfee and installed Norton Internet Security.  Installation of Norton were possibly affecting the ability to receive automatic updates?  What is the solution?

  I also get a message that I am not currently connected to any network, but I am actually connected to my home wireless network.  This message seems to have surfaced at same time as issue updates resurfaced.  Any suggestions?  Thank you.

  I'm about out of ideas here. Since running the removal of McAfee and then tool reset Windows Update did not solve the problem, this leaves us with only two choices in my humble OPINION:

  1. one or more of the measures of protection in real time from NIS are intefering (assuming that NIS installed & working properly); or...

  2. you see the effects of a hijackware infection.

  OPTION A: Contact the Support of Norton (Symantec).

  OPTION B: Carried out a thorough for hijackware.

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and the rename it, for example, SCAN. EXE, before being able to execute it!

  2. run this online scan (in Safe Mode with networking, if necessary):

  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  3. now after the required logs in an appropriate forum for assistance by an expert in the field. DO NOT SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck & please keep me on any progress you make.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update stopped working on my Vista system.

  Error message indicates the service is not started, but the list of services that Windows update as "started."  Rebooting makes no changes.

  Malware scan shows clean.  Norton 360 clean registry showed the key for "lack of program windows\system32\wuaucpl.cpl" and delete this key.

  How can I fix?

  My last use of this computer was in December 2011 and this is the last time I used Windows update on it, and it worked normally.

  It's on my laptop HP Vista 32 bit factory-installed.

  Error message indicates the service is not started, but the list of services that Windows update as "started."  Rebooting makes no changes.

  Malware scan shows clean.  Norton 360 clean registry showed the key for "lack of program windows\system32\wuaucpl.cpl" and delete this key.

  How can I fix?

  My last use of this computer was in December 2011 and this is the last time I used Windows update on it, and it worked normally.

  It's on my laptop HP Vista 32 bit factory-installed.

  "Norton 360 registry clean"

  * sigh *.

  Double whammy.  Norton and the words "Clean Registry" in the same sentence.

  OK - no matter what you think you have, if you know that you have done the excact steps I'm about to give you in a different order, etc. - tracking them in the order shown, not not an ignorant because you have scanned with that even (or other product) 35 seconds before you read my answer, etc.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Reset.

  Download (save) system update and do a right click on it and "Run as Administrator". Choose the right one for you:

  • All supported x 86 Windows Vista (32-bit) versions
  • All supported based on x 64 (64-bit) versions of Windows Vista

  Let things run/fix.

  Reset.

  Try to update.

  If it still fails, try the following:

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the issue is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• Games on Windows 7 stopped working with 'Error Appcrash'.

  Abdoulaye... I am new to windows 7, when I had windows xp... .i installed some games like gta san Andreas, easports cricket 2007, and now after windows 7 when I installed both of them they give error like gta sanadreas.exe has stopped working or ea sporsts cricket 07.immolation exe stopped working... and when I check the problem details

  Problem event name: APPCRASH
  Application name: gta_sa AGENT VINOD THE GAME.exe
  Application version: 0.0.0.0
  Application timestamp: 427101ca
  Fault Module name: gta_sa AGENT VINOD THE GAME.exe
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 427101ca
  Exception code: c0000005
  Exception offset: 00346929
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 1 c 51
  More information 2: 1c51b7cf5f755c4d7a6a5695f56a9046
  3 more information: 49f1
  Additional information 4: 49f16cb5f615193c4ae4f9ccaa5a2af0
  
  my system configuration required
  2.0 ghz to drive hard 160g
  2 GB of ram
  256 video card
  and they are enough for these games... Please help me
   
  Original title: games problem (appcrash)

  "Yes, it's just a name... why you take only that all games are not runnign.

  GTA SA is the only person mentioned in the error report.
  Also the games .exe would not properly work with "just a name" inserted into it.
  You can't go change the name of a file and expect it to work.
  It is "just a name", or would it be a virus, or perhaps another type of alteration to the game?

  EDIT: I see that there is a game called Agent Vinod games site / Play 181 com
  No sign of GTA SA it well.
  There is also a game. You also have the game installed on your machine?
  http://www.alltrickszone.in/2012/04/play-agent-Vinod-game-online.html

  The error for easports cricket 2007 report also has the
  Words AGENT VINOD THE GAME as part of the name of the Application?
  In addition, that this error report says nothing significant.

  There are many possibilities for games does not.
  Direct X not up to date. Graphics drivers not installed or not up to date.
  Corrupt installation of the game. To name a few.
  Also - Games downloaded from Steam, for example, may have different problems of games on the disk.

  Conflicts with other software can also stop games function properly.
  These can sometimes be found by running your PC to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

• Windows Update stopped working after the reactivation of Vista Ultimate 32 bit

  Cloned hard drive bigger and replaced hard drive in your laptop. Everything worked fine until I was invited to reactivate Windows Vista Ultimate (32 bit), I did over the phone. Now, Windows Update does not work - service is not active. Is this a known issue? Any suggestions to fix would be appreciated. Ran Malewarebytes, Turned off update automatic and then restarted (suggested in a forum), and tried to fix with installation disc, none of them worked again.

  Five other updates have been installed with Windows Update Standalone install (an is not necessary for my system). This a better option than update mode without failure. Windows Update works now again.

• Microsoft Windows has stopped working a problem due to the closing of the program

  original title: MICROSOFT WINDOWS has STOPPED WORKING A PROBLEM CAUSE THE PROGRAM to CLOSE__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • MICROSOFT WINDOWS HAS STOPPED WORKING
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Aries19,

  Are a. When you this error?

  B. recent changes made on the computer?

  C. when exactly do you get this error?

  D. don't restart your computer / closed applications after this error?

  Let us try these methods.

  Method 1:  [Scan sfc] System File Checker

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search.

  2. right click on cmd in the list programs and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Visit the following link for more information:

  http://support.Microsoft.com/kb/936212

  Method 2: Virus Scan

  You try to run a Microsoft online virus scanner and check if it detects something.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 3: Clean boot

  Clean boot uses a minimal set of drivers and startup programs and helps eliminate software conflicts.

  (a) click Start, type msconfig in the start search box and press enter.

  (b) under the Services tab, check hide All Microsoft Services.

  (c) under the Startup tab, click on disable all, then click Ok.

  (d) If you are prompted to restart the computer, click Restart now.

  When the computer is in a clean boot, applications and third-party services are disabled. Once the computer is restarted, check if the problem occurs right now.

  Check out this link that talks about how perform a clean boot
  Note: Follow all of the steps in the link to know what software are contradictory.
  http://support.Microsoft.com/kb/929135

  Don't forget to reset the computer in a Normal startup once find you what software is conflicting.

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• When starting, receive error message "BM83b_2190.exe has caused windows to stop working.

  When I boot up I get the above mentioned error box. can someone tell me what this means and how to fix it?

  * original title - BM83b_2190.exe caused windows to stop working. What is - this? *

  Hello

  • How long you have been facing this problem?
  • What were the changes were made until the problem occurred?

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.