Windows Update stopped working after the reactivation of Vista Ultimate 32 bit

Similar Questions

• Windows Defender stop working after the malicious software removal tool

  I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If the problem persists, please after return.

• WLAN stopped working - Satellite X 200/N00, Vista Ultimate 32-bit (SP1)

  When I bought this laptop earlier this year, everything worked fine without any significant problems. A few weeks ago but my WLAN connection has stopped working - more specifically, it does not get a valid IP address of the router.

  Laptop is a Satellite X 200/N00 (PSPBUA). OS is Vista 32 - bit Ultimate edition (SP1).

  It was working fine until the point where it stopped working. The router itself still works fine - I used the connection with a completely different laptop wireless since having the problem on the Toshiba.

  This seems to be a fairly common problem of Vista, but so far all that I tried did not get me anywhere.

  The router is a D-Link DSL-G604T. I've updated to the latest version of the firmware, but it made no difference.

  In Vista, I have disabled IP v6.

  I installed the latest version of the Intel (v12.1.2.1) wireless driver. Material passes all tests, the only thing that fails is to get the IP address.

  I don't know why the wireless connection just stopped working - better that I myself can remember, I had not installed any new software or updates just before stopping work. It doesn't seem to be a hardware failure.

  One thing I've yet done, is test the connection with a completely different wireless router (for example, to a public access point).
  It may be interesting, but I have not really useful, since I need to make it work with the router!

  Any thoughts?

  Hello

  There are several reasons why the IP address cannot be obtained.
  In the first case, you should check if your firewall is disabled or doesn t prevent IP address of reception.
  Second, you should check if the TCP/IP protocol is set to automatic
  You can find these settings in the properties of TCP\IP Protocol.

  Last but not least, I would recommend disable all security settings on the router and tries to establish a WLan connection.
  Please check if the Mac address filtering has been disabled, disable WLan encryption and check if the right SSID is being used.

  If it will be possible to establish the WiFi connection you could activate step by step single WLan security on the router settings.

  Good bye

• access keys stopped working after the upgrade from vista to windows 7 Professional,

  keyboard shortcuts no longer works after upgrading vista to windows 7 Professional, I have a desktop hp, 64 bit, and use of wireless, my keys, i.e. hot keyboard.  have been, key, key club hp, search key email, help key, eject the dvd buttons, stop, play, etc. before keys do not work, THE VOLUME BUTTON SLEEP MODE KEY ŒUVRES WELL, Please HELP, HP AND MICROSOFT will not HELP ME, ILS ARE SAYING what CALL HP, HP SAID CALL MICROSOFT, SO No. MORE MICROSOFT or HP for ME ANYMORE ITS APPLE MAC TIMES, THANKS IN ADVANCE

  You need a version of Windows 7, the keyboard drivers for your HP computer model.  Go to Support & drivers HP to start site. Boulder computer Maven
  Most Microsoft Valuable Professional

• Update stop working after the upgrade.

  Just upgraded to Windows 7 Edition Home Premium to Windows 7 Professional. Now, Windows update will not work. I put it to the automatic updates, no updates will take place. When I check the updates now it displays update disabled.

  HowManage , Configure and troubleshoot Windows updates

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Explorer Windows has stopped working after the installation of svc. Pack 1 for Vista Home premium

  have the toshiba p205D-S8802 model. I am away from home and don't have my boot drive or my program files. I can send and receive e-mail and can browse the web. I can upload files to an external hard drive, but cannot recover in a normal way.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. When did you install Vista SP1?

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• Windows Update stopped working Windows 7 64 bit

  Hello

  I'm currently under Windows 7 64-bit and Windows Update stopped working. When I open Windows Update and click on ' Check for updates ' I get an error message stating "Windows Update cannot currently check for updates, because the service is not running." "You may need to restart you computer. After the restart of several times there is no change. I use Vipre Antivirus and Windows Firewall, I think. Any help would be great.
  Thank you
  Doug

  Deletion of c:\windows\softwaredistribution\datastore\logs\edb.log

  Reboot and try...

• Windows Update stopped working.

  I have the 64 bit version of Windows 7 SP1 installed on my laptop [Dell Studio 1747 with processor i7 4 GB RAM & 750 GB hard drive.  Windows Update stopped working on my machine.  All updates through April 19, 2016 have been installed.  I already did the following:

  (1) installed the previous images dating back to several months

  (2) only run WindowsUpdateDiagnostic.diagcab to get error # 0 x 80070005 several times

  (3) race reset Win Update.bat unsuccessfully

  (4) run MicrosoftEasyFix20179.mini.diagcab without success

  (5) I tried install subinacl.msi and runs the recommended Reset.cmd file

  (6) installed WindowsUpdateAgent-7, 6 - x 64 .exe

  All the latter were applied as suggested on the Microsoft Support Website.  None of these maneuvers in addition to the various applications of my antiviral software and malware, brought any resolution of the problem.  I would appreciate any suggestion short of a new facility, because I can't seem to find anywhere, all the new boards.

  I don't know what worked, but Windows Update started to update itself again.  What I don't have, though, was to limit the number of updates, I got the update at some point, less than 30.  I read a post at one point noted that a large number of updates may increase the risk of errors of download and installation.  I had some mistakes on the first download, but those corrected when I download tracking the rest of the updates.  I do not wish that Microsoft would create a repair or update protocol independent site, because it seems that this is not an uncommon problem.

• Windows updates always installed after the return to a previous restore point?

  A restore point to bring victory 7professional. What will happen with the windows updates that came after the restore point?  Clicking on updates windows just always looking for updates, nothing happens. Updates are received before the restore point still installed?

  Windows update itself creates one in order to make them reversible. To resolve the issue, see updated:

  Windows 7 update problems? First read this.

  Best regards, VZ

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Explorer stops working after that I have to use Windows Update

  Currently, using Windows Vista Ultimate 64-bit service pack 1. After that I restarted the computer to finish the update/install Windows I can't use the functions from the Start button. Any attempt also runs programs through the Task Manager is met even uselessness. I gives me the error that Windows Explorer has stopped working and restarts. However, all program shortcuts that I have on the desktop can be used.

  The only way to solve the problem for me is to use the system restore to take me to a previous time when I didn't have the problem. However if I try to update by using windows update I experience the problem again.

  Im trying to download update is Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 64

  Finally, I'm sorry if I posted in the wrong forum, I don't know where to go. If posting in the wrong forum, I would appreciate a link to the right pair.

  -Josh

  Hi Josh, I had the same problem with Windows Explorer on a HP Vista Home Edition 64-bit computer, it would keep restart loop and stops also all the programs in the taskbar.

  I searched different forums and I tried different options, but nothing worked until someone said it might be a virus. I have Norton but it does not detect anything, so I tried Defender of Windows (that I had turned off because I had Norton) of Windows Defender found this startup program called mwau.exe to rest under C:\recycler\(random numbers...) but when I open the C: drive, I couldn't find anything manually, but there is no option to delete or disable it through Windows Defender.

  Then I Googled that name and found a software called free Antivirus "Malwarebytes anti-malware 1.41 ' recommended by CNET download.com, it's a small program, but I downloaded and ran, it found and removed this mwau.exe, I have not had problems with Windows Explorer after that, apparently mwau.exe means (I think) auto update for Microsoft Windows.» But after its removal, I have more problems. My updates of Windows runs as usual and I get new updates as usual, but this muau.exe was probably evil viruses do.

  Here is the download free link http://www.malwarebytes.org/mbam.php
  In addition, when you click on download the exe file name is mbam-setup

  Good luck. See you soon.

• DNS stopped working after the latest Vista updates

  Yesterday my Vista Home Premium has been updated by Microsoft through the automatic update process. After the update and reboot network stopped working. I was able to trace this DNS no longer works. I was unable to solve the problem until I supported updates, after which the system returns to normal operation.

  Now, of course, updates want to be reinstalled, but I don't want the network to fail again. Any ideas?

  Change how to get updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

  Right click on those you don't need > UAC prompt > it hide.

  Never install party hardware driver updates 3rd through Windows updates.

  Go to the manufacturer's website, instead.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  See you soon.

  Mick Murphy - Microsoft partner

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.