N100 0768 Windows 7 installation, driver problems

Similar Questions

• Cannot install Windows 7 HARD drive problems

  Hi all!

  I have lenovo ThinkPad T540p. Intel Core I7, 8 GB RAM and 500 GB HARD drive. I think my HARD drive is Toshiba. It had Windows 7 on it, but it starts no more on this subject. When I start Windows is it shows 5 seconds black screen, and then it displays the Boot Menu. Well, I tried to reinstall Windows, but when I have to choose on which disk to install Windows, I get an error: "no hard drive found." And the list with readers is empty, so I can't reinstall Windows. I've updated the BIOS, but it did not help. Finally, I formatted my HARD drive and created two partitions on it. It worked, but not for long. I installed Windows 7. Everything was going well until I restarted my computer. And then I got the same problem: 'Cannot start from the HARD disk' and displays the Start Menu. Then I booted Windows installation and I got the same error: "no hard drive found."

  I don't understand what is happening with my HARD drive and that is to destroy his scores.

  And I don't think that my HARD drive is broken.

  I don't really know what to do!
  Please, help me!

  Thanks a lot!

  Here is the solution:

  My HARD drive was broken. I bought a new MX100 of Crucial SSd and everything is fine.

• Yoga Pro 2 - display not recognized in windows (hardware or driver problem?)

  Out of warranty by a month!

  Yoga Pro 2-256 gb, installed a new wireless card a month ago. Windows 8.1

  The touchscreen still work while the screen is black.

  System restarted after the mode 'sleep', in my opinion.

  The Lenovo logo is displayed, seems to load Windows, but when windows loads (I don't see it so it is a hypothesis of load) drafts of the screen and the black light is on.

  Can I connect an external monintor that connects after the return from sleep mode (odd). Who then off the backlight.

  When the external monitor, the internal screen is not yet recognized by windows.

  When I boot in safe mode, the internal display works fine with of course limited capabilities.

  I rebooted on the support site display drivers.

  Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.

  Someone at - he of the clues as to what my happen? Hardware, driver etc?

  Can what information I provide?

  It is a pretty weird problem with contradictory observations.

  (1) screen working in Mode safe but not regular boot. (So not the hardware problem)

  (2) display on an external monitor in normal mode. (So, no drivers issue)

  Have you installed the wireless card yourself? You unplug the cable from the screen during the installation of the card?

  Could you re - open and check that all connections are good?

  The Wi - Fi card works well?

  I also recommend a complete reset of the laptop to eliminate the possibility that it is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure you make a backup on an external drive for your personal files.

• G505 Windows 7 installation driver AHCI

  Hi, I am trying to install Windows 7 64 - Bit on a fresh drive. It comes preinstalled on Windows 8. I thought I had found the right driver, the installer accepts the file but still can't find not all devices. The drive is seen in the bios.

  Can someone link me to the right .inf? It is an AMD chipset.

  Yes, CD, or one of the 2 USB2 ports on your machine will do and will pick up your hard drive during installation.

• Windows PCIe device driver problem. Windows hangs on the reception of the PCIe interface data.

  I am writing a the PCIe device driver. With the PCIe, I have a connected storage device. I assigned a buffer in memory using malloc() which I use to transmit data to and receive my material. In my hardware, I have a DMA which uses physical addresses for data transmission. The transmission of data to the storage device works fine, it's all data that I have in the buffer are correctly transmitted to the material, but as soon as I try to receive all data from my material in this memory buffer (in memory of the host), windows crashes! I tested it on Windows Vista and Windows 7, but both crashed on playback. I think that windows is not let PCIe write on his memory. If that is the question, can you suggest anything to fix this problem? Or if you think that there is nothing else that is causing this problem, please let me know.

  Any help is appreciated.

  You'd better post in MSDN forum here instead.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  MS - MVP - Elephant Boy computers - don't panic!

• Speakers on Windows 8 display driver problem

  The speakers built into Apple Cinema Display (version 24 ") used to work under Windows 7.

  In Windows 8, it's not true anymore. The driver is correctly installed and the device seems to work very well based on the status of the volume control, devices, etc. but there is no noise.
  I found that the sound works OK momentarily during Windows startup (startup sound plays fine) and if this software is running: http://www.holstschumacher.dk/p/brightness-controller.html
  I posted to @MicrosoftHelps on twitter and got the political response 'if it's a hardware or software problem speak the manufacturer' but this problem is on a Microsoft-written driver that strangely worked on an earlier version of Windows.
  In addition, the speakers of the display appear as a standard USB device and so the problem is somewhere in the Microsoft driver.
  Please pass this on your team of driver for a fix.

  All,

  I had this problem too, the solution can be found in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Apple-display-audio-stopped-after-upgrade/950f67ad-19e5-4f07-b7cd-36707d85155c?rtAction=1428068778703

  or go directly to http://www.holstschumacher.dk/p/brightness-controller.html and install the regulator brightness, don't ask me why, but he fixed the sound on cinema 27 "display.

• Windows 8 graphic driver problem

  Laptop brand : i3 2ndgeneration HP Pavilion g4-1130tx

  Operating system : Windows 8, 64-bit

  RAM : 6 GB of ram

  Empty card: AMD Radeon 7400 m Series (Microsoft Corporation - WDDM v1.20) and Intel Graphics 3000

  Problem : I can not install the driver got on the site of HP so I can not use my Radeon graphics card

  This is the driver I install for my AMD Radeon

  <>http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117683-1&cc=us&DLC=en&LC=en... >

  

  Give KUDOS to each helpful post and to all who take the time to help me. That's all I can give thank you guys!

  Hi Zidane2010,

  How at - it go?

  If this does not work I need you do a right click on the unknown and even device uninstall on your Amd graphics card.  Once done restart the computer.  Need to reinstall it.

  Let me know.

  Thank you

• Display/video for windows 8 pro driver problem

  I use a HP pavilion dv6000 series, model 6602au. Last month, I installed windows 8 pro. Everything works well except the video display driver. I tried to update the driver through the Device Manager, but its display dirver is up tp date. I'm not motion pictures or text as clear as my Windows vista or windows 7. Can u please give me the link to install necessary driver or please give me a necessary solution. Thanks in advance.

  Hello:

  Here's what I would like you to try...

  Download and run the vista driver support for your laptop and driver, page on the link below.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-70238-2&CC=US&DLC=en&LC=en&os=2093&Product=3543711&sw_lang=

  Don't worry if it errors out or do not install...

  Now, close out of all windows error and go to Device Manager.  Under the section display maps, click on the video controller.

  Click the driver tab.

  Click on set to update driver.

  Select the 'Browse my computer for software' and navigate to the driver installation folder that was created when you ran the file.

  This file will be located in C:\SWSetup\sp42635.

  Make sure that the include subfolders is selected, and I hope that the driver will be installed.

  Reboot and you should have decent graphics card again.

  Paul

• 1206tx envy 6: Windows install hard drive problem

  I currently install windows 8.1 and in my cell there are two ssd 30 GB drive hard one and only one 500 sata.
  I can't install on sata as it says it's style gpt and I tried to delete and now it is not allocated and is not awarded. On the ssd, it was in error, and I read a forum saying that removing the drive sata hard and get on ssd. I did and I did but after connecting the hard drive it is said that there are no windows installed.

  Hi there @Abdull,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I watched the Style GPT error and the error No Windows installed.

  The laptop you have comes with SATA 500, but you also have a 30 GB SSD. Does do that? The SSD is external, or put in the machine yourself?

  I would say performing a HP System Recovery to reinstall the operating system, assuming that the partition is still intact. If this is not present, you did a set of recovery media?

  Please follow these troubleshooting steps, re-post and let me know how everything went.

  Thank you!

  Have a great day!

• Can not activate wireless after Windows vista install driver problem?

  Hi all

  Don't know if this is the right place for the post, if not I apologize in advance.

  I have a Compaq Presario C700 (C730EM) on which the hard drive died on me, I have brought a new and installed Windows Vista disc premium edition (not a backup / recovery disc).

  Everything seems fine but I can't turn on the wireless, the C700 has a button at the top wireless rough (which has a red LED when not away) to the left side. Normally impose you it, and it lights up (turns blue LED) but nothing!

  I have commented on Wi-wired and update windows etc and have tired to find wireless driver I guess that I'm missing? You are not sure if it's wireless missing driver or a keyboard driver?

  After installing a few drivers I found where time no joy!

  Can anyone help?

  See you soon

  P

  You are the very welcome.

  This driver below should set you straight up.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Best regards

  Paul

• Windows freezes; Hard drive problem?

  My daughter has an HP Pavilion g62-435dx with Window 7 Home Premium64bit.

  Windows runs a little time and freezes.  I ran the HP hard drive diagnosis advanced test and got Smart Check passed and short DST failed with code UFXB9X-5GN6A8-PXG02K - 60Q 703.

  Is the hard drive a total failure?

  Yes that's correct...

• Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

  Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

  I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

  I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

  Hello
   
   
  The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
   
  Step 1.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
   
  Step 2.
  Here is the link to download the latest drivers.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK
   
  Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
   
  This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
   
  For more information see the links below.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installation of WINDOWS HOME SERVER on a server that I just built. Driver problems.

  I'll use my old office of 3 years of Dell (Inspiron 531) as a server. I will be installing WINDOWS HOME SERVER software on this subject. The vehicle currently has Vista Home Premium on it. Someone I know said I could have driver problems. Is this true? If it is that drivers enough to be responsible and how to see their loading? Chris Mah

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  Kindly repost your question in the above Windows Home Server Forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Audio driver for 0768-54A

  I installed the Windows 7 RC1 on my Lenovo 3000 N100 0768-54 has.

  I downloaded the updates available from the lenovo site and everything works fine (PCMCIA untested) could get outside the Audio. Windows automatically installs a driver and brand as the Digital Audio S/PDIF, but cannot get any sound.

  I tried the solutions proposed by different for one but unable to solve the same.

  PL has a solution to the question above I use a portable silencer.

  concerning

  Anand jegou

  It is the vista driver that worked for me with win 7.

  Pilot

• Problems with the windows 10 installation partitions

  So I try to install windows 10 via bootcamp on my macbook pro 2012.

  However, I still have problems when I get to the screen of partition on windows 10 installation.

  So I opened the USB BOOT EFI and install from there.

  I enter my product key, accept the license, and I'm greeted by the partitioning. I select the bootcamp partition, but it will not format, gives me an error message, or it will allow me to format, but no real format. If I try to delete the partition I can't create a new one, because it gives me an error message. If I try to solve this problem by making the partition EXFAT / FAT always displays the problem. If I format it under OS X EXTENDED it allows me to move forward, but after installation, it simply gives me the blue screen of death trying to boot from the BOOT EFI of SSD.

  No idea how to solve this problem, I am getting very frustrated and frankly upset against apple to give instructions so little.

  Thank you.

  Is there a particular reason to interrupt the normal process flow using the Alt/Option key? Is your USB, USB2 flash drive Installer?