N200 that pilots for a new installation?

Similar Questions

• Need hardware for the new installation of R12 (12.1) under Linux

  Cheap DBA
  
  Kindly advice me the hardware, CPU and memmory for the following specifications for the new installation.
  
  100 users.
  
  500 GB Production database
  Application of Production of 500GB
  500 GB of Test instance.
  
  Linux operating system.
  
  Oracle R12 Application application (12.1)
  
  No configuration RAC and DR.
  
  
  Best regards
  SG.

  PGO

  Please visit the links referenced in this thread.

  Sizing
  Re: sizing...

  Kind regards
  Hussein

• News of connection fails for the new installation of Windows 7

  I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.

  I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.

  I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.

  I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.

  Try to reinstall Windows and configure the account again, and after reaching the office, create a backup account.

  In addition, for security reasons, enable the administrator account.

  Reinstall Windows 7:

  Using the recovery partition to reinstall Windows 7

  Step 1

  Restart the ThinkCentre and repeatedly press the "F11" key like start the computer to the top.

  Step 2

  Watch a message on reboot telling you press F11 to access the product recovery program. Quickly, press the "F11" key when you see the message. If you do not see the message, you do not have a recovery partition on your hard drive and must instead use recovery discs. Once you enter the recovery mode, either by pressing 'F11' or booting from a recovery disk, the ThinkCentre shows main recovery screen.

  Step 3

  Follow the prompts to choose your recovery options. Use the settings by default unless you want to customize the recovery. You can choose options such as full recovery ',' "Content factory" or "Restore my hard drive to the original state of the plant," according to the particular ThinkCentre model.

  Step 4

  Insert new disks when you are prompted if you restore DVDs.

  Step 5

  Click 'Yes' when prompted to restart the computer. From this point, the recovery process is completely automatic. Your computer restarts several times, and the whole process takes sseveral minutes or more. Once installation is complete, Windows displays the configuration for a new user screen, as if the computer comes out of the box.

  Step 6

  Complete the installation of Windows by entering in your language, regional settings, network settings and the Windows user name. You may also enter your Windows product key, which is on the DVD provided with the system, or on a sticker on the computer.

  --------------------------

  If this does not work, contact technical support

  replacement of http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do and demand

  Create an extra account:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Activate the administrator account:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

• key Windows 8 for the new installation on windows 8.1

  Hello

  Anyway we can use key windows 8 to install windws 8.1 fees

  Thank you

  Hi Imran,

  You can't use the product key Windows 8 If you perform a new installation of Windows 8.1. The recommended method is to install Windows 8 and upgrade to Windows 8.1 by store. You can use the upgrade product key to Windows 8.1.

  For more information, see this article.

  Updated to Windows 8.1 : FAQ

  http://Windows.Microsoft.com/en-AU/Windows-8/upgrade-to-Windows-8

  Hope this information helps. Response with status so that we can help you.

• I can add a host for a new installation of the customer web vpshere

  I have a new installation of the UNIX client.

  I have a new installation of esxi 5.5

  I'm trying to manage the new host through the web client. How can I add this host to the web client?

  This seems to be the problem, the administrator@vc55 is you computer administrator account. Login with these and check?

  username: [email protected]

  Password: SSO master password

• I reinstalled Windows 7, but the product key is not accepted. Message says that the product key is upgraded only, not for the new installation. What should I do now?

  I have re installed windows7 and product activation key is not accepted. Message says key is valid only for the upgrade. What should I do now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Missing drivers for the new installation of XP SP 3 on HP Pavilion 500-202eo

  Hello.

  So I tried to make XP SP 3 to work on my new desktop HP Pavilion 500-202eo. I have partioned the disk in two and was able to install and modify Windows 7 on the other partition, largely with the support of the HP drivers for my model successfully. However I have not found any support for XP drivers for this model, or any other similar models in the 500 series with APU AMD A6 material - 6400 k Radeon HD graphics card. Installing XP went well, but I'm not having any sound, internet or USB 3 support options. In Device Manager, the following components are marked in yellow with the error code 28:

  Audio device on High Definition Bus Audio

  Ethernet controller

  Network controller

  SM Bus controller

  USB controller Universal Serial Bus

  Video controller VGA compatible

  I tried to install the drivers Realtek for XP at least addressing the absence of sound, but it doesn't seem to make a difference, and when I point the Add Wizard of material on file with the drivers Realtek he says that it cannot find the correct drivers. You have any suggestions where I can find the software needed?

  Hello:

  I doubt that you will be able to do all this work, but that's...

  Your PC has the IDT audio controller so the Realtek audio drivers do not work.

  First install the AMD chipset driver and restart. You want the first file in the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%20XP%20-%20Professional/home & RenderOnServer = true

  Graphics: See if this driver works...

  http://support.AMD.com/en-us/download/desktop?OS=Windows%20XP%20-%20Professional/home & RenderOnServer = true

  Ethernet: DL and install the driver Windows of the 3rd group of ethernet cards (pilots AR816X QCA817X family). It would be the last driver in the section.

  http://www.QCA.Qualcomm.com/resources/driverdownloads/

  Try this driver for the wireless card:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Audio: See if it works...

  Scroll down to the bottom of page to:
  
  IDT_HD_Audio_6469_xp_win7_win8.zip

  http://www.driversguru.com/HardwareID-HDAudio---FUNC_01-_-VEN_111D-_-DEV_76D9-_-SUBSYS_103C3387

  All audio drivers it try also.

  If the chipset driver above does not install the smbus controller, I enclose the smbus controller below in attachments driver files.  Download and unzip the file.

  Go to Device Manager and click on the smbus controller device.  Click the driver tab.  Click on set to update driver, and then select manual search method.  Select disk, and then locate the file you unzipped\SMBUSamd

• Installer of DMA2200 - Center support looking for driver (new installation)

  I just came home with my new DMA2200 and I get through most of the media center install but when it installs and checking the items off it hits "Configuration of the extension settings" and a dialog box saying Windows new hardware found opens and asks me to locate the driver.  There is no driver on the CD and nothing in windows.

  If I skip this section of hardware installation does not finish the installation

  Help!

  OK, I got than that, for some reason any even thought the "Search subfolders" box has been checked, the found new hardware wizard was not performing the System32 folder.  I did there and bingo, all work.  I wonder if it was something to do with indexed locations?

  However, it would have been much easier if Linksys put the drivers on their website

• Should what drivers I for any new installation

  Hi all:

  I have X 220

  I want to clean install windows 7 pro

  During installation, I am asked to insert a CD/DVD driver

  and I don't have it.

  I intend to download the drivers from lenovo Web site.

  But there are so many pilots, that one would be sufficient?

  Thanks in advance

  osager wrote:
  Sorry, I edited my original post.
  I want to say that I have X 220
  I WANT TO clean install Windows 7

  Currently, I have a linux system on it.
  So I do not have the ThinkVantage.

  So I bought the DVD of Windows 7 from the store
  and all by installing the DVD of windows 7
  the system prompted me drivers.

  You can make it complicated for help us to you. In this post , you wrote that you have downloaded an ISO file that you found on the net. Here you say you bought a DVD.

  You will need an official Win7 disk (or ISO real) that corresponds to the type of product key of Windows you have. A legitimate Win 7 disc will not ask for drivers.

  Start Win 7 installation disc

  Follow the prompts

  Enjoy

  If you do something else than that, then you don't have a record of Win 7.

• How can I use the serial number of 11 elements for a new installation?

  I bought the 11 items in 2011. Unfortunatelly the computer was formatted see because of the virus. I downloaded in my new pc 11 items and try to install it. When asked to enter the serial number (which I remember from my adobe account) I get an error message, that the serial number is not valid. Is it not possible that I lost the ability to use a purchased program because it is trying to install in another computer? Can I run the program in trial version and then, (when?) Enter the serial number? Anyone know how to be able to use the program?

  I really appreciate your help.

  You can still use pse11 with your serial number.

  your serial number works always with the correct setup file.  Error: "serial number is not valid for this product". Adobe Creative Suite

  [moved from Creative cloud download & install download, installation, commissioning]

• (Beginner) of the initial steps for the new installation of vmware workstation & guest os

  Hi, very new for the virtual machine. I need help on what type of software (vmware), need and the first steps of the installation.

  Current configuration: a portable 3 separate HD, 1 computer = Windows 7, 2 = XP, 3 is Linux RH. I have manually swap HD to work on each operating system.

  Req: A laptop with Windows 7 as main OS and two other OS (XP and Linux) Guest.

  (1) I prefer not to install OS and the entire application again for the guest operating system (XP and linux), will like to convert, copy, etc.

  (2) can I install multiple OS (XP) for testing of applications and then delete them?

  (3) can I use a different version of an application in a guest operating system?

  The software that I need to buy:

  VMware workstation 7.1

  Version of the converted VMware?  (this may be free, I think)

  ThinApp 4. ???

  If these are vmware software that I need is a step by step installation, in particular of the convert.

  Thank you, ralph

  Hi Raoul,.

  Welcome to the forums.

  VMware vCenter Converter Standalone is a free download that is accessible to everyone, so you can use it to convert your existing machines.

  For testing purposes, you can create a virtual machine "or" with all standard applications, and then use the function 'linked-clone"of the workstation. In this way, you can have several machines quickly with the same basic configuration to test different applications.

  It is more complicated to have multiple versions of the same application in a single virtual machine. ThinApp seems to be the solution, but it should require the application packages (I have no experience with ThinApp) construction. It's a bit complicated just to test. Way the easiest would be to create a new virtual machine for each version of the application.

  Workstation and the converter are very easy to install if you use a standard configuration.

  Good luck.

  Concerning

  Franck

• What components do I need for a new installation of APEX 4.0?

  Hello
  
  I have used Apex 3.x in my past. In this new position, I need APEX again. Can't wait to use them again.
  
  I'm in an all-Windows environment. I want to give a proof of concept for Apex 4.0, but the installation guide says of many other components. 4.0 seems to be more complex than 3.0, so I thought I would check my approach and components.
  
  If I want to install a new database and the application environment on a new Windows PC, components that I need for a complete solution?
  
  That's what I have so far for the list of components:
  Oracle XE 10g R2
  Oracle Application Express listener 1.0
  Containers for J2EE (OC4J) Oracle
  Oracle APEX 4.0
  
  Do I need all these components? Do I need more?
  
  Thanks for your help.

  Hi Jari,
  Who did it!
  I need only XE and APEX.
  Thank you very much.
  Phil

• My motherboard has exploded and I have the hard drive. How can I copy the address book for a new installation on a new computer from the old hard drive?

  I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  https://support.mozillamessaging.com/.../home
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• Specifications for a new installation of Foglight a GREAT environment vSphere

  Hello all-

  New Foglight for Enterprise Virtualization and we try to implement a test to see how it performs in an environment of our size.

  We have worked with the representatives of Dell/Quest/Foglight but so far have not been able to get very far in the correctly "tweaking" for usable performance. so I'm tender hand to everyone here for some thoughts.

  We currently have a large enough vCenter with over 7400 VMs, 20 + data centers, hosts 450ish, across the country.  It's a 5.1Update1 environment and the vCenter and related services (VC, SQL, VUM, SSO, WebClient) are all Windows 2008R2 machines virtual on a cluster dedicated to ESXi 2 nodes and all virtual machines to vSphere have all the power in the world to run it.  vSphere itself works well.

  For our Foglight install (the last FfVE v7) consistes of 3 virtual machines.  A FMS server, a SQL Server (2008R2 - dedicated not shared SQL DBs w / any other) and an Agent of vSphere server.  We threw all kinds of resources to this as well - but performance is so bad that it is simply not usable and we have not even present all 7 k + VMs... It is only arount k 5 of them.

  All are Windows 2008R2-

  VSphere VM Agent has been configured for 4 vCPUs and 12 GB of RAM.  It is on the same network segment and same physical host vCenter so it can work on the same vSwitch and did not have excessive network traffic between the two.  The disk is SAN IBM XIV with 8 GB HBAS.

  The SQL VM is 6 vCPUs and 12 GB of RAM.  Another host, network different segmant and different SAN storage IBM XIV.  This SQL Server computer runs ONLY the DB FL.  The DB is locked to 8 GB of RAM, original disc it size 250 GB and there are a lot of drive.  The vDisk is THICK put into service and latency in the standards.

  The FMS server is on a host dedicated - no other guests running on it (for good troubleshooting purposes has not made difference).  He has all the army all processors to himself, has 32 GB of RAM, the virtual machine's memory is all locked/reserved.

  For all three computers virtual, the vCPUs are not competing, time LOANS are low, there is no memory sharing, balooning, or Exchange and the disks are thick with low latency.

  The FMV of the Agent from the server vSphere is set to 8GB min/max.

  The FMS server JVM is located at 12 GB min/max.

  So you see, we gave er everthing she has, but it is VERY VERY VERY SLOW.  To the point, it is completely unusable.

  As a comparison - VMware vCenter Operations manager is a VAPP 2 - VM, has access to the same vSphere with the same objects and it works perfectly fine and smooth.

  My gut tells me there is something not right in the JVM, but I don't know enough.

  Help, please!

  If you have time next week, we can discuss?  I've worked with a lot of large environments and I would like to see the details of what's going on before I comment in too much detail to lead you down a path or another.

• Don't know password for the new installation of Windows 7 Ultimate on VmWare Fusion

  I bought Windows 7 Ultimate 64 bit and installed on my MAC OS X machine in VmWare Fusion of an image file provided by the seller of Windows 7.  However, when I start the merger, there is a 'user' set up account, and it asks for a password. Typing in anything doesn't work, or 'guest', 'user' or 'password '.  So I can't past the login screen.

  What can I do?

  That was my mistake, and I 'found' the password trying my MAC password.  This was extracted automatically, or if I entered during installation without remembering, I don't know.  In all cases, it is resolved.

  I can't mark my own reply as 'Reply', nor can I delete this question :-(