N3024 snmp trouble with openmanage switch.
Hello
I have two new N3024 that I want to manage with openmanage essentials.
I configured N3024 with a name of community and also put in place a notification recipients.
The two switches openmanage shows upp under devices.
But they both have a yellow alert on them.
If I try to go to the web interface of openmanage, it takes me to the address 0.0.0.0
Under general / health in the switch I see nothing wrong.
What is the problem?
I also try to get the N3024 to send traps.
I have test it with linkup and linkdown.
The newspaper of trap on the switch that I can that a trap is generated but in openmanage nothing comes in.
I have no problem with any other material traps.
Any suggestions on what I am doing wrong?
In general the latest firmware has several improvements on the 6.1 firmware SNMP protocol. After the upgrade is done we should test and see if all the problems are solved. If this isn't the case, then we can look in that still does not work.
Tags: Dell Switches
Similar Questions
-
Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted
Have you tried turning off and back on again?
-
Trouble with Touch ID when you want to put one, it says that it does not recognize the finger
Trouble with my ID touch, when I want to configure it says it cannot recognize my finger
Apple Watch is not TouchID. Let us know what device you are using so that we can this post moved.
-
Trouble with the Satellite Pro L300 Ethernet controller driver
Hello
I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)
Put XP Pro/SP2-Having trouble with the Ethernet controller driver.
I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy
Realtek_LAN_56861032008_XP.exe
install
installed in a folder named c:\ "DELL"-(WHICH can not be move?)
drivers R86360
OF this dossier, I do the "setup."broad com 440 x - installs as everything is good,
made just TWO yellow controllers.in etha...
\
but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.Can someone please point me in the right direction.
Thanks in advance...
Steve
Hello
It seems that the Australian model, try this one:
http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe
-
This morning we plugged a phone Avaya IP (5621SW) to our network. It synchronized to the top, as it was supposed to, but we started to receive calls on PC hide. After some research, it seems that all PCs connected to a GS716T switch indicates no network connection when the phone is connected. Unplug the phone and turning the power on/off switch everything returns to normal. No other Netgear switch have been affected. We have replaced the GS716T with another switch (not a GS716T) and connect the IP phone has no effect. Wondering what it might be on the GS716T which makes it sensitive to the IP phone? Any thoughts?
Hello Kelley,
Well, this isn't the configuration that I expected. The model number of the phone was 5621SW, so I thought that the connection is PC > phone > switch. I tried searching a few cases reported on the GS716T and did not find anything related. This problem is, I should say a little weird, since they do not use the same switch. But let's start the update of the firmware.
We will wait for your update.
Thank you
-
Can I configure NISE with a switch of party - if the switch is not installed?
I've never used NOR Switch before Executive - we hope to use it on a new project.
We do not have equipment at the moment - we will use a Pickering 40-540-021 '132 x 4' switch.
I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? I get an error when I create the NI Switch Executive virtual device. Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..
Here's what I've done so far:
-Install the drivers of Pickering.
-To the MAX (v5) I have setup a session driver IVI and logical name.
When I try to create a new NI Switch Executive peripheral virtual, I add the logical name of the switch, click [next] and get the NISE error...
"An error occurred so they were trying to access the devices PROJECTSWITCH. The primary error: unknown status code (Hex 0xBFFA400C).
I see that a virtual device is created with no logical switch assigned. I get the error even if I try and add a logical switch manually to the virtual device NISE.
Is it because the switch Board is not available for the system? Can I configure the routing/groups/exclusions without the device being mounted physically switch?
Thank you
Alan
Alan.
Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..This should be the expected behavior. NEITHER Switch Executive tries to communicate with the instrument before allowing you to configure routes to ensure that there is no problem that would affect the operation of the Switch Executive. In your case the pilot trying to communicate with a non-existent device.
I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? Can I configure the routing/groups/exclusions without the device being mounted physically switch?
It is possible that all compatible IVI devices should have the ability to simulate.
It seems that you have configured your session of IVI driver incorrectly for a simulated device. I try and make sure that in the session driver, under the 'Général' tab, select the drop down menu to "Simulate with" and select 'Specific driver' and then click 'Save the IVI Configuration'. This will return the Pickering driver selected in the 'software' tab and simulate a device. This should allow you to create a virtual device NI Switch Executive and develop and test the code on the simulated instruments.
I would like to know if you have any other questions.
-
Just set up a Win 2 K server 8 and trouble with FTP.
FTP on windows 2008 serverJust set up a Win 2K 8 Server and have trouble with FTP. FTP and IIS roles are installed and port 21 is open on the firewall but still can't connect. Any suggestion would be appreciated. Thank youHello Spacekowboy
If the suggestions of the Ing. Ladislav Cermak do not work then repost it please your question in the Windows Server forums from the link below. Thank you.
http://social.technet.Microsoft.com/forums/en/winservergen/threads
-
Brightness problem with aspire switch 10
Hi all
I have a gene with a switch screen aspire 10.
The brightness level is constantly changing. It is not dependend on the ambient light, because I turned off Adaptive brightness. (When I put a flashlight on the light sensor that does nothing).For example: sometimes when I switch between the metro and the desktop mode. Notable stage screens turns a bit more or less clear. It also happens when you watch movies, opening programs, almost always when the image changes.
Does anyone know a solution to this?
Kind regards.
To resolve this problem, I did this.
On the desktop, right-click. Properties of the graph. Power. I turned off the screen of the energy saving technology.
I hope this works for you also.
-
Having a lot of trouble with updates.
Having a lot of trouble with updates. Windows updates do not settle with error code 0 x 643. Fix from MS Computer Center said as he repaired software update. This does not resolve the issue. Fix MS datacenter failed with code 16977922-2147024894. Troubleshooting MS Wizard had had to close with an unexpected error code 0 x 80040154. Norton updates fails with an error unexpected 0x000003E8. Update of Skype have also failed.
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.Method 2:
Try to perform the clean boot, and then check if it helps:
http://support.Microsoft.com/kb/310353NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
-
Switch issues. Help, please.
How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.
-Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
-Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
-Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.Thanks in advance for any assistance that you can provide and Merry Christmas to you all.
It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router. In addition, what is the model of the switch?
To save the manual copy and the new hits of the ipconfig/all command output-
First connect through switch.
Open a command prompt window (start > run > cmd > OK)
Type the following lines in the black command prompt window and press ENTER after each lineecho "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line
echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
Notepad '% UserProfile%\Desktop\ipinfo.txt '.
outputCopy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.
You can delete ipinfo.txt on the desktop when you are finished.
-
Anyone who has other trouble with redcross haqve anti-virus software?
original title: redcross anti virus
Anyone who has other trouble with redcross haqve anti-virus software?
Hello
Red Cross Antivirus is a fake antivirus, a scam to force you to pay for it while he has no advantage at all.
Red Cross Antivirus remove (uninstall Guide)<-- read="" this="">-->
http://www.bleepingcomputer.com/virus-removal/remove-red-cross-antivirusIt can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Trouble with conversion email from POP to IMAP Comcast: Code: 800ccc0f
Original title: POP IMAP conversion
Trouble with conversion email from POP to IMAP Comcast:
Code: 800ccc0f
Your server suddenly put an end to the connection. Your IMAP command could not be sent to the server, due to non-network errors.I'm on Windows 7 Home edition, Service Pack 1.
Using e-mail with Comcast Email Client programs
http://customer.Comcast.com/help-and-support/Internet/email-client-programs-with-Xfinity-email/Instructions for:
Outlook Express
Outlook 2003
Outlook 2007
Outlook 2010
Windows Mail or Windows Live Mail
Windows 8
Mozilla Thunderbird
Mail for Mac
Eudora -
ISE 1.1.2 change of authorization with Avaya switches (5520)
Hello
I'm ise configuration to make the assessment of posture. I saw avaya my LAN and Core switches. The idea is once the user is authenticated using 802. 1 x, then it will be moved to qurantine vlan and after that it complies with the policy of the company then it will be moved to the vlan real. I have configured the switch avaya to accept the assigned vlan and also configured RADIUS authentication dynamic 802. 1 x. Currently, RADIUS assigned qurantine vlan works but once the nac scan agent and mark the status of compatible PC then the CoA is not the case, and user is not moved to the vlan real.
I tested the same authorization of the ise policy to assign dynamically VLANS on switches cisco and it worked perfectly, but the same thing is not happening on avaya switch.
Any idea on this?
Kind regards
Akhtar
Akhtar,
Posture with ISE flows have only been tested with Cisco switches:
http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/compatibility/ise_sdt.html
The RFC says that port 3799 is for CoA, but due to a conflict, we use port 1700 so that my have something to do with it. That said we don't pretend to support 3rd party switches currently. If you do not want to see this please contact your Cisco account team to check the status of the part 3 switch support or request the feature.
-Jesse
-
I had trouble with my windows 7 Home premium, so I downloaded it again, now when I connect it has windows7 and windows Home premium, but the family version premium won't load, how to remove this version of my hard drive?
Click Start, type: msconfig
Press enter on your keyboard
Go to the Startup tab
Select the entry you want to delete
Click on delete
Then set the time to '0'
Then click on apply and OK
Restart if prompted.
------------------------------------------
If the problem persists, try the following
Click Start, right click on computer
Click on properties
Under control panel home
Click on "advanced system settings".
Go to the Advanced tab
Under Startup and recovery, click settings
In the default operating system list, select Windows 7
Uncheck the "time to display list of operating systems".
Click OK
Then apply and OK
---------------
If it still does not respond, try the following:
EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager.
-
IM have trouble with userinit.exe, there a like (0 x 0000000005) of the error, and I don't see anything in the screen is all black, what I have to do?
I would also like to run a file system check to verify and repair the operating system files
Run a file system check to check and repair your system files.
To do what type cmd in start search box, and then right-click to run as administrator, then
SFC/SCANNOWIt may need be performed up to three times before success
Let us know the results of the report at the endRead here for more information
http://support.Microsoft.com/kb/929833
Maybe you are looking for
-
When I click on add to Firefox to https://addons.mozilla.org/pt-BR/firefox/addon/dictionnaires-fran%C3%A7ais/botton, nothing happens. I had this add-in before updating Firefox.
-
Why an MP3 would not be able to load in the cloud?
I got game and a few times recently an MP3 of a song created from a Youtube video is not accepted in the cloud in iTunes. I have the icon of the barred dustbin cloud. No idea why?
-
The screen record, channel up/down buttons missing in live TV
Hello I am running Windows 7 (Version: 6.1.7600.16385 - win7_rtm.090713 - 1255) on a HP m9080n pc (System and tuner below specifications) and encounter a weird problem when watching live TV. If I place the mouse on MC I get on the screen control for
-
How to upgrade Windows XP to Windows 7 64-bit
Original title: System requirment for updated 64-bit windows 7 from windows xp 32-bit I have hard drive of 160 gb hav dual core processor 2 GB of ramWindows xp 32-bit so please help me in the upgrade 64-bit windows 7 Many thanks to authorized dignita
-
Just bought a HP mini 1010nr. I love it, except for one problem. When I move the cursor upwards or downwards it jams and this funny little money search rectangle appears at the end of the needle. It's a random thing, however. But there are enough to