NAC appliance 3315 OOB remote management with BMC (ILO) does not work

Similar Questions

• My optical drive is not displayed in "Device Manager" the eject button does not work

  Latitude Dell with Windows 7

  My optical drive does not show in the "Device Manager", the eject button does not work - I can only eject through the pin hole.

  This means that the drivers are missing or that the disc is broken?

  I tried to restart.

  Thanks in advance

  Dave Roberts

  Original title: Reader in mind windows 7

  Its possible the drive has failed. Is this an internal or an external drive? In both cases, make sure that all cables are properly connected and functional, including the power cables. If its a USB external drive then try another USB port.

  But, assuming that you tried to update the drivers (get the latest compatible drivers on the manufacturers for your brand/model/OS(32/64 bit) PC support site and install to see if that helps - first set a system restore point)) and then see if this MS article helps - https://support.microsoft.com/en-us/mats/cd_dvd_drive_problems?wa=wsignin1.0

• How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work.

  How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work?

  You don't need a serial nr for updating a program

  You need the original CS4.0. install and add the series nr. to get the program to work.

  Now you can update to 4.2.1

• Cannot find CD/DVD drive in my computer on Device Manager. CD - DVD does not work

  I recently discovered that my CD/DVD drive does not work. It worked fine before. Tried to burn a CD in iTunes, but the error message says that the software or the CD device could not be found.

  My CD/DVD drive does not appear in the computer or Device Manager. I have read a few forums and tried to delete upper and lower filters, but that no longer works. Help, please.

  I am running Windows Vista - it came installed on my computer when it was purchased.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Games used with Windows XP does not work

  Can I install XP on the same computer with 7?

  Games will not work on windows 7... It was the biggest reason outside the Office that I bought the new computer... now my games does not work...

  These are your options to get a game like work on Windows 7.

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Thank you

  Marilyn

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Problem with BearPaw 2400CU Plus Scanner with Win7 Scanner does not work properly

  BearPaw 2400CU more does not work with Win7

  Yes I did, but it has not solved the problem

• BEFORE the UPDATE of relaxation with time stamp does not work as expected

  We have a scenario where I check update operations on a table.

  I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.

  Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.

  (I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)

  'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM
  

  Here is my test case.

  DELETE FROM TEST_TRIGGER_1;
  
  DELETE FROM TEST_TRIGGER_2;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker)
       VALUES (1, 'I', SYSTIMESTAMP);
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  UPDATE TEST_TRIGGER_1
     SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP;
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  

  Def trigger:

  CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION
  ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW
  FOR EACH ROW
  WHEN (
  NEW.IBM_SNAPOPERATION= 'U'
        )
  DECLARE
  V_SQLCODE  VARCHAR2(3000);
  --PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
  INSERT INTO etl_dbo.TEST_TRIGGER_2
  (ID,
  IBM_SNAPOPERATION,
  IBM_SNAPLOGMARKER,
  TRG_INS_TMST
  )
  VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP)
  ;
  --COMMIT;
  END;
  /
  

  Output is something like this

  1 row deleted.
  1 row deleted.
  no rows selected.
  1 row created.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   I                 13-OCT-15 03.07.00.927546 AM 
  1 row selected.
  1 row updated.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM 
  
  2 rows selected.
  

  But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given

  It's OKAY - I told you in my reply earlier. Reread my answer.

  could understand somehow that the UPDATE statement is made with earlier

  SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have

  time stamp prior to the trigger, but this isn't what we wanted. We want to

  BEFORE the update)

  As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.

  Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.

  HE has TO - it's your update processing statement that causes the trigger to fire.

  Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.

  Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.

  The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.

  But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.

  And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.

  Reread my first answer - he explains all this.

• Sampling of colors with the eyedropper does not work.

  In Lightroom CC, I create a graduated filter. I want to give it a color, if I click in the gray box, which shows the colorpicker. I understand that you can pitch a color of the picture by clicking the box with the colors, then hold and go to the photo and release the mouse button, LR will choose this color. This does not work with me. If I click on the mouse button and let the color box, the slider in the color box drops to zero saturation and does not move with the colors of my photo I'm going with my pipette. It does not pick up the color.

  Same problem here! Selector is not looking for colors on the image window (it does outside of the Lightroom window!)

  I found that the problem occurs when the preferences are set to use the graphics processor.

  Disable the GPU and the color eyedropper tool returns to work on the image window.

• 'Open with Photoshop Elements' does not work

  My photo does not open in Photoshop Elemtens, when I use "open with" to a JPEG file. The program starts, but no picture opens. What can I do?

  I did as you said, but it does not work.

  But I found the Solution in another forum:

  'open with photoshop elements EDITOR' and not with photoshop elements...

  He now works :-)

• With the clause does not work in SqlPlus for DataBase 11 GR 8 1 material

  I have 11 GR 1 database material, when I connect to my database through SqlPlus (version 8.0.6.0.0) this query

  with x as (select * from areas) select * from x;

  does not work. But when you use SqlPlus provided by 11g, this query works well. This query can run on an older version of SqlPlus?

  user12222356 wrote:
  This client software is installed with Oracle developer 6i form. should I remove all the form developer? Latest version of the form developer is available for 11 GR 1 matter?

  Well, you have problems with the developer of forms?

  I wouldn't recommend delete because you have problems with the SQL more customer that goes with it. I recommend to download the instant client and using them for your needs of sqlplus and leaving the rest products installed on your machine only.

• BlackBerry Desktop Manager 6.1 smartphones does not work with Windows 7

  I am my end with the Blackberry Desktop Manager software 6.1 I have now uninstalled and reinstalled 4 times!

  Operating system is Windows 7 Pro.  Made own re - installs every time.  The onbly sucessful BB Desktop Manager was Version 5 - which in my view is no longer to download after agreeing to the update to version 6.

  Vicious ferret kindly sent some suggestions but they did not work.

  BlackBerry Curve 3 G, not very far going into the waste tray...

  Therefore, I can't synchronize or update or make full use of my phone.

  Help!

  You can see why I'm exasperated. PC is relatively new and built (software wise) from scratch - IE don't have not just download old system files.

  Bishop office just will not load. Tried various troubleshooting patches offered on the sites of RIM (pretty useless) advice.

  Have now uninstalled all BB and the restarted and downloaded Office Mgr version 5 and myself to try again syning flight.

  Even followed the suggestions on Microsoft Outlook 2010 to Outlook Connector.

• Remote control DVD "skip" function does not work for Blu - ray (Encore CS5) projects

  I graduated from SD to HD and I need help.

  I just finished my first project HD in CS5, he engraved on a Blu - ray disc and immediately encountered a problem: jump jump forward and backwards remote functions do not work. (I met several other problems on the road to get here, but I solved with the help of the manual and by browsing this forum ). In this project, I am doing exactly what I did in my previous SD projects (where this function works):

  1. In Encore CS5, I added "Chapter Points at intervals... ».
  2. On the timeline in the properties panel, I kept the default selection "Operations: all allowed" (which includes 'Search for chapter' in the menu 'The authorized user Operations').
  3. In the "Project Preview" window, by clicking on the "Next chapter" or "Previous chapter", the function is executed correctly.

  However, after burning the blu - ray disc and pressing the buttons "jump back" or "forward" on the remote (Panasonic DMP-BD65) Blu - ray player, the 'Operation not permitted' message. (This very remote button function works on all my SD projects).

  More background information: I use also marks chapter to the PrPro project related to Adobe Dynamic Link, chapter marker tips end Actions (Jeff The Focal Easy Guide to Adobe Encore DVD 2.0, pp. 178-180) and the Bill on the use of the 'fade to black' transition to avoid the second ~ 1 the gap between chapters in the Playlist of chapter I use to play all chapters.  This observation can be independent: in the monitor Panel, 'Step Forward' button with the Alt key does not move the CTI to the next GOP brand. The work of functions (without pressing the Alt key) 'Step Forward' or 'Step backward' (move a frame CTI)...

  At this point, I desperately need help from the Forum.

  Thank you

  -Laci.

  Still must properly set the interval even chapters after the transcoding.

  You must say to "Return to the Original" If you do not want retranscode.

  Let us know on the chapter playlist in blurary: I think you will find that they do not work. Blu - ray, you must use the method used for SD cards.

• Changing the settings to default print with CUPS still does not work, regardless of the application

  Hello, I looked through a number of positions on the definition of default printer in a Mac, but nothing solve my specific problem. I recently spent a PC to a MacBook Pro, just updated to Mountain Lion and installed my printer wireless, HP Deskjet F4500 Series, with the pilot chosen by my computer. The printer-computer connection usually works, but when I go into the CUPS and change the default settings for Fast Draft, n/b only, it does not apply when I print. I tried several times, making sure to save my default settings in CUPS (and indeed they appear here as Fast project, b & w only), but no matter which application print from - Safari, Chrome, text edit, etc.. - it prints in color and normal mode unless I manually selects the settings for that particular print job. This is especially a problem when printing things that are not pop up a print dialog, such as online coupons. I could easily change the settings of the default printer on my laptop and they apply to coupon print as well, but I'm having no luck with the Mac. Help, please! Thank you!

  Finally I got it solved!

  There are two options in Mountain Lion when you add the printer HP CM1415fn (Apple-> preferences-> Print & Scan system): "AirPrint" and "HP LaserJet CM1410 Series.

  So, with "AirPrint" set default CUPS Options has no effect, even if you change. PPD file.

  Fortunately, with the 'HP LaserJet CM1410 series' setting CUPS the default Options works well!

• My Atheros AR5007 802. 11b / g wireless networking with Windows 7 does not work (works with Vista) and had two HP & Microsoft support tech, they could physically turns on (Soft Touch button) by driver, can you please help?

  He used to work under Vista, not working (not able to turn it on) wireless adapater. But when Win7 starts upward, it turns on and turns off immediately.

  Hello
  First of all, make sure you use the latest version of QLB. If not, install from below:
  Buttons lunch fast HP here (ver. 6.50.7.1)

  One important thing to keep in mind. Before update no matter what driver, make sure that your first uninstalled old version.

  Try installing this driver and check it works:
  
  Atheros Wirelesss driver for Win7 from HP here (ver. 8.0.0.172)

  When this driver does not solve your problem, try an exits:

  Atheros Wireless here (ver. 8.0.0.225)

  If even this will not work so tell me one thing. You have all colorors of stgrange the button mute or wireless.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.