NAC Manager startup problem

Similar Questions

• New problem z50 - 75 wireless? Startup problem

  Hello

  I had an another hp laptop which had a problems but the know-how could not fix it so they give money and I brought another Hp 4 days but then she had to be exchanged because of defective. Currys and PCWORLD even gave, but the problem kept pass. So I just paid the HP one and brought 3 days LENOVO Z50-75 it y a. the first Hp laptop, I had, had dns clients warnings in Event Viewer when you use wireless. Same thing on the new computer hp laptop. This problem still occurs in the LENOVO one too. These events started in Windows 10 for all laptops hp and lenovo. My computer laptop lenovo came with windows 10 in any case. So either it's a bug that should be fixed by a new update for the network adapter needs to be released. Computer laptop lenovo has Qualcomm Atheros the old hp laptop realtek the new computer hp laptop that was defective was and intel double wireless broadband and the same edition, DNS CLIENT EVENTS 1014 WARNINGS are still happening. This is definetley not my ISP fault because I replaced the router, more they found nothing on a week 2 diagnostics test on my internet. SO I just want to say lenovo that if there is a way you can fix this. Another thing is that after installation WIN10 threshold 2 on Lenovo Z50-75 when starting of the laptop it shows the logo screen once then black lenovo and then black screen again, then it boots. I have also all the latest updates. So if there is a way guys can fix that also. I'll post this in the microsoft forums too if they can help. Thank you

  Hi I managed to solve this problem by disabling the DNS CLIENT service, but always the startup problem also happens when I stop or restart the cirlce logo going arouns the shows as usual then flashes then closed restartsor and the same thing happens in the Welcome screen it flashes (black screen for a second), and goes after UPDATE of TH2

• Update Manager - Installshield problem ' an error has occurred. Error code # 5'

  original title: Update Manager - Installshield problem

  I'm having a problem with the Update Manager.  An error code is always popping up "an error has occurred.  No. 5 error code.  It then returns me a website www.consumer.installshield.com for more information.  I can't figure out how to stop this.  Any suggestions?

  Hi Lindieonlyme,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) when exactly you get this error message? When you perform a specific activity or even when the computer is idle?

  Method 1: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: You can see the steps outlined in the article below, which addresses the issue of InstallShield

  InstallShield error messages

  http://support.Microsoft.com/kb/910816

  (Article apply to Microsoft games, steps applies to the issue at hand)

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Judgment of NAC Manager HTTPS response after activation of the AH

  Judgment of NAC Manager HTTPS response after activation of the AH

  I have currently NAC installation in a lab, and as soon as I restart the Manager after you have configured the AP server stops responding to HTTPS and I got Service temporarily unavailable. After restarting the server I saw something console to check the HA setting but I not see this message again and I don't know how to check these parameter in CLI.

  Hello

  This may mean that HA is not correctly configured (problem with certificates, heart rate, etc.).

  The best thing to do is to connect via SSH for both cams, go to /etc/ha.d/ and delete the files: 'perfigo.conf' and 'ha.cf.

  These are the files that contain the HA configuration, if, after deletion, restart the machine and they will come as stand-alone upward again.

  As a stand-alone, you can HA startover config again, ensuring that you follow the steps required:

  http://www.cisco.com/en/US/docs/security/nac/appliance/installation_guide/hardware/48/hi_ha.html.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• iMac troubleshooting ADVANCED startup problem

  Hello. My iMac does not complete the boot process. It chime, then display the Apple logo.

  The progress bar will get about halfway, then disappears from the apple logo. Gray rest screen for about 2 minutes, then the computer shuts off and the process repeats. NOTE: the computer does NOT respond to the "safe" mode (shift key) or (command-R) disk utility commands. What else can I try?

  Start - computer restarts by itself-Yosemite

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  Do you mean, there is an error message about problems with access rights? (toegangsrechten?)

  Where your photo library is stored? In your pictures folder, or on an external drive?

  You share the photo library with another user?

• HP Pavilion 23: startup problems

  Because we bought our computer in October 2014, we had many problems with the start, problems of drivers, startup problems, graphic card problems and more. It was supposed to be fixed once by the bu retailer still, there are questions. The biggest problem is starting:-it freezes, error messages that say lag not found drivers or disk not detected though when checked is. Also, we have done numerous resets hard which are just a quick temporary solution and back problems. We pay every month for a service contract with the retailer, but they mostly just try to run the store for our computer repair you... NOT HAPPY because for the third day, we bought there have been problems and we haven't bought a computer to sit in a workshop constantly, not at the price we paid coupled with the monthly fee for whatr amounts to nothing. Is there something we can do to solve this problem without driving miles and being without a computer that actually, we bought to USE?

  Hello

  Without compromising your contract, I suggest

  SYSINTERNALS which is a suite of tiny applications bit that may help.

  https://TechNet.Microsoft.com/en-us/Sysinternals/default

  Now only 3 or 4 are likely to be beneficial, and some does not at all because they are for servers etc.

  Thus a special interest may be...

  AutoRuns

  LoadOrder

  RamMap (maybe)

  Contig (maybe)

  PageDfrg

  ROOTKITREVEALER

  DiskView (maybe)

  PsInfo (not really)

  psping (not really)

  After trying a few please ask if there is something to be interpreted.

  I suggest you turn off auto update if you can.

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• Integration of Cisco ACS and Cisco NAC Manager - downloadable ACLs

  Hello

  I have Setup Cisco NAC in my environment. These are all works well. The users themselves will get authenticated via Cisco NAC Manager. The Cisco NAC Manager meets with Cisco ACS for the part of the user database. These are all works well. I would like to activate downloadable ACLs. I tried to use the CISCO-AV-PAIR method and creating a downloadable ACL entry in the shared components, but nothing works. It's either I'm doing wrong or this configuration of the mine does not support downloadable ACLs? Please advice kindly.

  Kind regards

  RAM

  + 6 012-2918870

  Hello

  It is not possible.

  You cannot push the ACL in the NAC manager.

  If you make the Radius of NAC authentication manager, you can do is create roles the NAC Manager, and on the roles you define traffic strategies.

  Using the Radius attributes you can then map users to roles.

  Please, take a look at this:

  http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_auth.html#wp1158789.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• The NAC Manager/Server license question

  I use a pair of NAC Manager failover with 5 games of CAS servers. Each set of CAS servers is authorized to perform the different amounts of users. (i.e. 1500 or 3500) I loaded all the licences in the Manager. (All Coses PAK have been validly submitted by using the MAC address of the Senior Manager.) Is it possible to assign... or... How will I know which set of servers will be assigned the appropriate license for a specific set of users max?

  It was only from pak or was it separate paks... because he's going like that with a pak u generate license for cam (this is the license for the number of servers it can handle)... for that you must provide the mac cam address. then for each server FO u can use even PAK or a new and mentions the mac address of the server here and makes the exact differenc... If you had separate Pak. each PAK is given based on the license you requested from...

• Startup problem blue screen that seems to be associated with BHDRVX64

  I have a laptop model Dell Inspiron N5110 running Windows 7 Home Premium 64 - Bit.  I have Norton Security Suite running - seems to be normal.  When I started my pc this morning, I got the dreaded blue screen of death.  A window will appear which indicates that there is a startup problems and offers several options to correct the startup problem.  One option is to run a startup repair program.  I tried and failed, then it has proposed restoring to a previous date program.  It does not work.  He suggested then reload the Windows program by providing more options of Windows rereloading.  I'll try the drive backuo system I created when I got the new computer-, but then, for reasons unknown, my pc suddenly decided to restart all of himself and it started normally.  Happy, happy.  But then a window pops up that says my computer has a device problem that has been identified as "ROOT\LEGACY_BHDRVX64\0000" she added that "BHDRVX64" was absent, does not, or that he needed a driver. Okay now my pc works normally, but I'm afraid to turn my pc off because this problem seems to be associated with start-up. »

  HELP, HELP. Any suggestion would be appreciated. Thank you. Bobbysan 70

  This program is part of the Norton Security software, so I would like to uninstall and reinstall.  For more information, see with Symantec.  Here is a link to the Google search, I did, FWIW.

  http://www.google.com/webhp?sourceid=toolbar-instant&hl=en&ion=1&qscrl=1&rlz=1T4TSNP_enUS464US464#hl=en&sugexp=les%3B&gs_nf=3&cp=8&gs_id=0&xhr=t&q=BHDRVX64&pf=p&tbo=d&qscrl=1&rlz=1T4TSNP_enUS464US464&output=search&sclient=psy-ab&oq=BHDRVX64&gs_l=&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=89c683d2e84ef3a4&bpcl=38625945&biw=768&bih=460&ion=1

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1 TB external hard disks around $ 70 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Instance startup problem

  Hello
  
  We have a CCR 2 node (ud1 UD2) environment, it was resolved to the top for a long time. We were able to start and stop instances and the database without problem.
  
  Suddenly 2 days back NODE1 has failed. Since then, we are not able to start the node NODE1 and getting following error: - (NODE2 is in place and fine tunning)
  
  [oracle@SER1 ~] $ srvctl start instance d SERVER1-i NODE1
  PRCD-1027: Impossible to retrieve the SERVER1 database
  RPRC-1070: could not verify if the ora.server1.db resource is registered
  Cannot communicate with crsd
  
  In addition, while trying to issue the boot command, get following error:
  
  $ sqlplus / as sysdba
  
  SQL > startup;
  ORA-01078: failure in the treatment of system settings
  ORA-01565: error in the identification of file "+ ORADFLT/server1/datafile/spfile.dbf".
  ORA-17503: ksfdopn:2 could not open the file +ORADFLT/server1/datafile/spfile.dbf
  ORA-29701: unable to connect to the Cluster Synchronization Service
  
  It is not the first time that we are launching this command. Please help with this problem...
  
  Thank you!
  
  Published by: 851602 on July 22, 2011 03:47
  
  Published by: 851602 on July 22, 2011 03:50

  Can you also please make sure that all network interfaces are correct.
  Ping the private sector of both nodes of interconnection and make sure that the servers can communicate.

  You should also look at 'How to Troubleshoot Grid Infrastructure startup problems [ID 1050908.1]'

  You said in your 1st post + "suddenly 2 days back NODE1 got failed...". » +
  That happened the node does get deported, did the crash of the instance...?
  Have you looked in the nodes of the log files if there are errors during this time? I don't understand that you can't get any kind of message in the log files to give us an indication of what could be wrong.

  Please look at all the files following logs on both nodes during the period when the 1st omitted node:

  /log//alert.log
  /log//crsd/crsd.log
  /log//cssd/ocssd.log
  /log//ohasd/ohasd.log
  

  Concerning

  Published by: user10506095 on July 25, 2011 12:02

• Boot Manager Windows problem asit always starts with a selective startup under the Startup tab

  Whenever I start my laptop I get Windows boot manager options in which it highlights the option of windows 7 and I have to press Enter and continue with this option selected.

  I tried to change my boot options in msconfig, but once again the configuration back to selective Starup of Normal startup. Also I disabled some startup applications, but even changes are not get saved when I restart the system after changes. My touchpad no longer works between the two, and then it starts to work. My left and right keyboard arrows keys do not work.

  My change in normal startup is get back on selective startup.

  Please help me to solve these issues.

  Hello

  It is very possible that this is for the reason that you have corrupted files on your system. System File Checker will scan your system for the missing, corrupt or damaged files. In addition, it will try to correct them. If you have changed the important system files, System File Checker will be - make sure you make backups of them!

  How to run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  I would also recommend that you run the Startup Repair to the problems that Windows may be displayed when you start your computer.

  How to run the Startup Repair tool

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/Startup-Repair

  Thank you

  Legaede

• High memory problem NAC Manager

  Hi guys, I have a failover CAM´s installed. I had seen a high ram memory in the 2 devices use. The use is greater than 80%. Anyone know what is the cause of this memory usage?

  Also, I have a NAC integrated with these CAM Profiler.

  Concerning

  Gerard

  Gerard,

  Your system seems well. Linux uses free/used memory to cache data and so the reported free memory space may seem very low, but it is used by the kernel to use for caching. As and when necessary, the kernel frees the memory for the process to be used, so it's normal. If you want to watch which processes are using the most memory try this command:

  PS auwwwx | AWK ' {print$ 4 "\t" $11 ' "} | kind | uniq - c | AWK ' {print $2 ""$1""$3 "} ' | sort - nr

  The output will show you the process with the memory used. For example on a cam test here was the result of the above command:

  14.3 1 /usr/java/jdk1.6.0_12/bin/java
  0.8 /usr/sbin/httpd.worker 1
  0.7 1 /usr/sbin/httpd.worker
  0.6 /usr/sbin/httpd.worker 1
  0.6 1 postgres:
  0.5 1 postgres:
  0.5 1 heartbeat:

  Java sense takes the most memory.

  HTH,

  Faisal

• For managed Weblogic Server startup problem

  Hello
  
  When starting a managed server in Weblogic console it gives 'nodemanager is not working' error. I don't know what is happening here. It was working fine before.
  
  Thank you
  Pawan

  Hello
  Please check wheather node Manager runs inside the server. Please check the nodemanager listening port in the file nodemanager.properties and question under the control of your server.

  netstat - a | grep 'port '.

  Kind regards
  Kishore