NAC with security rtr

Similar Questions

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• My laptop 1983 support Chrome with security patches?

  I received an email from Google saying that the platform used on my laptop will not be supported with security patches in the future. What is a problem for me? I have a 1983 (white!) with Mac OS X, Intel Core 2 Duo 2.26 GHz processor.

  You may hear 2003?  Or 2013?  There is no Mac 1983 with Intel chips. The answer to your question is 'no, and Google told you,' but I'm curious to know what you really there.

• my windows server keeps flashing upward with errors with security

  my windows server keeps flashing upward with errors with security

  I suggest that you reinstall the operating system as there is a Setup error.

• MSN Outlook, hotmail "IE has blocked this site to display content with security certificate errors. Click here for options... »

  MSN Outlook, hotmail "IE has blocked this site to display content with security certificate errors. Click here for options... »

  How can I get rid of this irritating pop-up message whenever outlook is open?

  Without knowing what are certificate errors, it is a shot-in-the-dark.

  80 90% of certificate in Windows XP errors can be attributed to one of the following two issues:

  1. Time Date, time, time zone, or light of day on your computer is/is not set correctly.  The time on your machine should be within 5 minutes of real time for certificates authenticate properly.  Right-click on your taskbar clock, and select time settings to check the correct time.  Synchronize time via Internet can solve this problem.
  2. Windows XP does a poor job of keeping its root certificates (certificates by which all other certificates are considered) up-to-date.  The newer versions of Windows did a much better job.  It certainly wouldn't hurt to update your root certificates and in many cases, this is all you need.  For update, visit the following article:
     "Members of the certificate program root Windows.
        <>http://support.Microsoft.com/kb/931125 >
     Then go down to the subsection titled "root Update Package (for Windows XP only).  Then click on the option "update for root certificates for Windows XP... "the link.  This will take you to the last downloadable update.  Download the package on your computer and double-click it to update your certificates

  One of the above should solve your problem.

  HTH,

  JW

• I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

  I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

  original title: can't get online

  Hello BurnBurn,

  I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  http://support.Microsoft.com/kb/283658

• problem with secure access

  Recently, I buy a scandisk 4 GB USB key.  It came with secure access software.  I failed and eventually remove the software.  Then I downloaded the software to access secure on my USB key.  I got the arch in place.  Then I closed it down.  Now, whenever I try to run access secure - it takes several minutes before I get the logon screen.  What's wrong?  What do I ned to do?  I am running windows 7 64 bit.

  OK, good analysis fb65.

  I have no experience with SecureAccess download but the blade I bought recently has SecureAccess on this and I have to suspect that they are similar if not identical.  Mine also shows a version of 1.1.19269.0.

  When I started the SecureAccess departure he asked if I wanted to sign up 2 GB of online storage, which I refused.  I suspect that you have accepted the offer, and that's why you try to connect to the ' net when you start SecureAccess.  I don't know how to disable this option, but I know not how to bypass links chiken.

  Go to your Windows\System32\drivers\etc.  You will find a file named hosts simply.  No extension.   Open the file with Notepad and down add this line:

  127.0.0.1 yuuwaa.com support.dmailer.com # SecureAccess

  Instead, you can try

  127.0.0.1 yuuwaa.com # SecureAccess

  One or the other should reduce to nil the impact that tries to connect online.

  HTH

• Have error code 0 x 80070020 then that he was trying to run backup... tried with security off the coast and still the same error message... solution?

  Have error code 0 x 80070020 then that he was trying to run backup... tried with security off the coast and still the same error message... solution?

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Can I get streaming with security essentials MSN quote

  With my current provider of security, Charter, I am unable to remember the quotes continuously when I use Yahoo finanace. Will I have the same problem with MSN essentials?

  Hi Rick,

  Thanks for posting this question in the Microsoft Community.

  You should not have more than one security software or antivirus installed on the computer, because they are a potential for conflict between them. Thus, it is advisable to have security software installed on the computer.

  You can read these articles and check if that helps.

  http://Windows.Microsoft.com/en-in/Windows/Microsoft-Security-Essentials-help#Microsoft-Security-Essentials-help=Windows-7&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  http://Windows.Microsoft.com/en-in/Windows/getting-started-with-security-essentials

  http://Windows.Microsoft.com/en-in/Windows/understanding-alert-levels

  http://Windows.Microsoft.com/en-in/Windows/Security-Essentials-product-information#tabs1=overview

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Blocked the hotmail Web site to display content with security certificate errors

  Blocked the hotmail Web site to display content with security certificate errors.

  Need help with answers.

  Hello

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link if you have Internet Explorer and check.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  Answer to us if you are having problems with Internet Explorer security certificate errors or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• How to make my PC compatible with Secure Boot?

  I want to upgrade to Windows 8 Pro but when I tested my PC with the Microsoft compatibility tool, he said that your PC is not compatible with Secure Boot.

  Can I download new BIOS files? If so, then in the folder that should I put them?
  Other solutions, you can give?
  My PC specs are:
  -Version of BIOS American Megatrends Inc. 0203
  -Microsoft High Definition Audio sound
  Graphics chipset - Chipset Intel 82945 g Express
  Motherboard - Asus P5GC-MX
  RAM - 1 GB
  Any help would be very very much appreciated :D
  ( Hope to soon move to 2 GB of RAM and get a graphics card AMD/ATI Radeon HD 5450 )
  
  
  
  

  So can I run Windows 8 without it? Will it be safe?

  Yep, perfectly fine without it, Windows 8 is compatible with Legacy BIOS without any problem.

• IE during sign-in, get "blocked this site to display content with security certificate...".

  I just got a new Office Win.7 and Internet Explorer by connecting to Adobe.com, becomes a 'Internet Explorer blocked this site to display content with security certificate errors'.  the message that I can't go beyond.  I added adobe.com to Trusted Sites.  I tried to lower the level of security.  I downloaded FireFox and it seems to work fine.  So, there must be a setting in IE.  Someone else has solved this problem?

  a PC Tech solved my two problems.  The technicians. have a file of certificates on one of their servers.  He who ran and it updated the certificate allowing IE to connect Adobe to Adobe.com.  Second, I received a "No. Internet Connection" message when you try to run the CreativeCloudSetup file.  We started Symantec Enpoint Protection and then stopped again.  It worked.  It doesn't matter that I had already turned off.  Restarted the PC several times.  Start and stop worked.  Hope this helps someone else out there.

• Which raid mode is the best performace with security for ESX OS?

  Hi all

  I need to rebuild the ESX OS, so I would like to know what raid mode is the best performace with security for ESX OS?

  No need to consider the capacity of the disks or numbers, just discuss the performace with security as raid 1 10 01 5 or 6?

  THX

  Hello

  Almost THEM are running with RAID 1, it's the default installation.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

• INACCESSIBLE_BOOT_DEVICE on Windows 8 with Secure Boot (Alienware x 51 R2)

  Hello

  I have a desktop R2 of Alienware x 51 and when I first bought it came with Windows 8. Long story short, I decided to install Windows 7 instead and for that I had to disable the secure in the BIOS boot option. Now I decided to install DOS Windows 8 and it worked and everything, but when I turn it back on Secure Boot it gives me a blue screen with the message: inaccessible_boot_device.

  So I don't know what to do here. Basically, what I want is to have Windows 8 on my computer with secure startup, commissioning. I don't mind not duty re - install Windows 8 given that I didn't restore my backups but I always try to solve this problem. Any help would be greatly appreciated.

  Hello

  I re-formatted my computer last night and ended up resolving this issue so I thought I would update this matter with my solution.

  Basically, I followed this guide:

  www.eightforums.com/.../38486-need-help-formatted-genuine-Windows-8-Lenovo.html

  With the help of the media Windows Installation tool, I was able to install Windows 8.1 Secure Boot with UEFI active. Please note that I used a USB Flash drive and not a DVD, apparently, it makes the whole process better somehow.

  Thank you for your help and time of Milena and Naomi!

• UserPOV does not not en with security filters

  I am trying to create the following scenario
  
  Create a standard model EN assuming standard dimensions. One of which "Department", I added security.
  
  My grid is the standard period through the top and the accounts on the side.
  
  My end user has Instance1 and Idescendants of this division. Instance1 is under the TotalCompany node, and that the user does NOT have access to TotalCompany.
  
  I have also disappeared in the preferences under this user, and then select Instance1 as my preference of the user. Without that it matters, but it is a cube of planning versus direct to Essbase.
  
  Now as the Administrator reports, I put the point of view of the Department, and the default setting is TotalCompany. But when the user tries to open the report it shows you that the user doesn't have access to the Member of the Department. But it does not allow himself to someone else, it just stops.
  
  When I move in Department grid POV and select Instance1, it works fine (so security is not the real problem here). But it does not on the whole as an option I want a standard report but to work with security to users.
  
  Any suggestions? Or should I do this a different way.

  Can you please check if the preview UserPOV is checked.
  In the workspace, go to file-> Preferences-> financial information, there is a button to activate the preview UserPOV