Name of the computer that makes @ startup

Similar Questions

• Permissions to change the name of the computer in Windows XP

  I have a user who I want to be able to have the permission to change the name of the computer that is connected to the domain.  When I try to change the computer name I enter the username and password in the popup box and then I get the following message: The following error occurred attempting to rename *.  Access is denied.  I know that this means that the user doesn't have permission to do this.  Can someone tell me what permissions they need?  I don't want to give them fo all administrative rights.

  Thank you.

  Tammy Mills,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to the areas and would be better suited in the Windows XP IT Pro community.
  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• change the name of the computer in homegroup

  Original title: Homegroup computer name Question

  I have a little trouble understand Windows 8 Homegroup computer names.  My name is Lance and I want the name of my computer to be 'Media-3 '.  I tried different combinations of account names and the name of the computer, but whenever I look under the box of homegroup in Windows Explorer, my computer is presented as 'summi_000 '.  It is a variant of the email address, I used initially to set up this new computer Windows 8 until I knew exactly what I was doing (don't know if I know even now).

  I can't quite understand how to get this 'summi_000' to disappear and put the right either user name or computer name.

  Any help would be greatly appreciated.

  Lance

  Hi Lance,.

  Try these steps and let us know the result.

  -Press the Windows key and the X key, then select run.

  -In the line run , type compmgmt.msc , and then press on enter.

  -In the left pane, select local users and groups. Double-click users.

  -Right click on summi_000 and rename it.

  -In the line run , type sysdm.cpl , and then press on enter.

  -In the computer name tab, select change.

  -Enter the name of the computer that you want and press ok.

  Once you have changed the name of the user and the name of the computer account, leave the homegroup.

  Leave a homegroup

  -Open homegroup by hitting swipe in the right screen edge, stitching settings (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking on settings), touching or clicking on PC and then change settings by typing or clicking homegroup.

  -Press or click on leave.

  -Restart the computer.

  Once the computer restarts, try to join the host group and check if the name mentioned under homegroup has changed or not.

  Go through http://windows.microsoft.com/en-in/windows-8/homegroup-from-start-to-finish

  Let us know if it helps or if you need additional assistance.

• I would like to get the name of the computer user. Is this possible?

  Hi guys!

  Is there a function I can to get the user name of the computer that is using the / open my form?

  
  I would like to surprise the user, praising your name on the form

  Thank you!

  Hi Rafael,.

  It can be done, but you have to work within the security of Adobe strategy. It is considered a security risk for the form to use the script to collect information about the user of the computer. You will need to use a function of trust, which is in a JavaScript (.js file) file. This .js file is then placed in a specific folder on each computer using the form.

  See a thread and examples here: Re: Dungeon user to print and see some pages

  This can be very difficult to maintain, and you will encounter problems if the form is activated in Acrobat Reader.

  Overall, it is possible, but it is a pain and if you form are intended to be used on several computers (outside), then it is probably not worth the effort.

  Good luck

  Niall

  Ensure the dynamics

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• How can I change the name of my computer that I assigned to Setup?

  I just did a system recovery and have an external hard drive to backup and realized I should have renamed the computer reconfigured slightly differently so I have separated on the external hard drive backups.

  As it sounds, as there is no involvement of the field...

  Use the computer name tab in the System Properties dialog box. To find this tab, use one of the following methods:

  • Click Start, right-click my computer, and then click Properties.
  • Click Start, click run, type sysdm.cpl, and then click OK.
  • Click Start, click Control Panel, double-click performance and Maintenanceand then click System.

  Change the name of the computer

  To change a computer name, follow these steps (in light of the foregoing...):

  1. Click the computer name tab, and then click change.
  2. Type the new computer name in the computer name dialog box.
  3. Click OK three times, and then restart the computer.

• Change the username on the start to something else, as the name of the computer

  I'm on a domain.
  I would like to change the username on the start menu for anything other than the username.
  User ID would be ok. Name of the computer would be even better.
  I see a number of things that could go instead.
  How is that possible?

  It would be nice to be able to customize the name of this poster in the startmenu.
  Too bad Microsoft don't think that in time there is.

  Windows XP puts the name of the person currently logged on to the system at the top of the start menu. The reason for this is to make it easier to say that the user is connected to a Windows XP system that is configured with multiple users. However, if you are the only person using the computer, you don't really need to have your name at the top of the menu start. You can remove it by using the Group Policy console (Microsoft Management Console snap-in used to edit Group Policy objects).

  1. Start the Group Policy console (Gpedit.msc).
  2. Go to User Configuration | Administrative templates | Start menu and taskbar.
  3. Find and double-click the setting remove the username from the Start Menu.
  4. Select the active option button, and then click OK.
  5. Exit the Group Policy console. The change will take place immediately.

  Note: This tip only applies to Windows XP Professional.

  Please rate me upward if you find my post helpful. Thank you!

• Change the name of the computer to apply to folders - Vista

  My computer was a friend, but when they gave it to me I tried to change the name of the computer to mine but that you are unable to apply to the user folders (I hope that makes sense!) - the user account name is Elise, but the address (?-equivalent of when you type a URL in a Web browser...) said again: C:\Users\kerry\Documents

  Is it possible to apply the name change for the name 'Kerry' is replaced by 'Elise' in the address?

  The only way to change this folder name is to go to the control panel to the title of the user accounts and create a new user account for the name you want.  Later, you can delete the old profile.

• want to 700: Ho I change the name of the computer

  I want to change the name of the local computer - the user account administrator.  I can't find a way to do it without starting with the operating system.  Is it possible to change the name?

  @KarCha

  Your system - an are:

  Results for "want 700" (246)

  You can change the name of the computer:

  Control Panel > display icon > System > Advanced system settings >

  the computer name tab >

  Next to rename this computer or change its domain... name > click Edit

  NOTE:

  Generally, for home use, do not change the name of the Working Group.

  ===========================================================

  You cannot change the name of the built-in account"Administrator".

  To create an administrator account on the computer (in C:\Users\) home folder is named how you like - and still use your connection to Microsoft:

  • Create a LOCAL account on the computer
  • Once the account is created >
  • Change the account and change the type of administrator >
  • Log in to the new local account >
  • Windows key > settings > account > sign in with a Microsoft account

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Can I use remote desktop if I enter address IP but not the name of the computer.

  Why can I do the desktop connection remote with the IP address but the name of the computer? RI

  Hello

  As topic.

  Please share how to fix my IP address is always changed. Thank you!

  Richard!

  Why can I do the desktop connection remote with the IP address but the name of the computer? RI

  Hello

  As topic.

  Please share how to fix my IP address is always changed. Thank you!

  Richard!

  If the computers aren't on the same network and and/or that the network is not along the NetBIOS name - then you will need to use the IP address or some form of dynamic DNS.  The alternative would be to change your HOSTS file so that you can give the name you want and not have to remember the IP address that is now associated with that name in the HOSTS file.

• What exactly happens when you change the name of the computer, and it asks you to restart?

  What exactly happens when you change the name of the computer, and it asks you to restart - relating to the registration and identification of network?  Specifically when a computer isn't yet in one area but is still in a working group.  Y at - it show any PC by informing other computers it's name has changed?

  Computers into working groups are actively seeking each other, so if you rename a computer, it will not be shown anything. The restart is to erase the name of origin since the system cache, he will think that it's always the old name until the reboot takes place. Work computers is simply 'shake hands' with each other whenever they need to communicate.

  Computers that are part of a domain are created a 'computer' account that is assigned a random password that changes every 30 days by default automatically. These computer accounts work almost identical to an Active Directory user account, which means that they are not proactive they simply cached credentials with their permissions to provide if / when requested by heritage in the environment.
  Users and computers Active Directory accounts are stored in the NTDS. SAID the database, the backbone of an AD environment. When a computer name changes in one area, it takes the PC restarted simply for the PC. The change of name in Active Directory will replicate throughout the environment based on the settings of replication of this environment.
  I'm too simplify all this, but the general concept is there.

• How can I change the name of the computer, C; \Documents and Settings\Margie\MyDocuments had to leave "Margie" or rename

  Using Windows XP - how to change the name on the computer.  Am not able to remove/change the word "Margie":

  C:\Documents and Settings\MARGIE\My recemment\...

  Used Microsoft Help but I am not able to locate where this comes in the settings.   We are on a network (without domain).

  Can you please help.

  Concerning

  Helen

  "MARGIE" in "C:\Documents and Settings\MARGIE\... is not a"computer name", it's a user"Profile name".  Once a user is created and its associated profile, this name cannot be changed directly.  The only practical way to change that is to create a new user, copy the data from the user profile of MARGIE in this new user and then delete the profile of MARGIE.  To do this, pretend that the "MARGIE" user profile is corrupted and then follow the instructions in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• my laptop will not find my wireless network when I'm trying to relog. I then reboot the computer to make it work

  I can be on my laptop and the internet works fine, but if I close my laptop and come back, sometimes it will not open a session. When I try to connect to a wireless network, it will appear not all networks at all and I live in a condo and I usually pick mine as well as a dozen other choices. The laptop won't restart when I try to shut down or restart, it just goes in the part of the judgment of the process, but goes no further. I have to manually hold the power button to shut down the computer.

  Hello

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• View the name of the computer on the Windows 7 Desktop

  The computer name can be displayed on the desktop by changing the C:\Window\System32\en-us\user32.dll.mui to display the name of the computer instead of the build # using PaintDesktopVersion. It's for Windows 7 x 64. I found the instructions of this sub Vista. I tried this edition but the build version still shows.

  Hello

  The computer name cannot be displayed on the desktop by using C:\Windows\System32\en-us\user32.dll.mui.

  There are to many third-party applications available on the market that can give a try.
  
  WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.