navigation pane + network address
void ApplicationUI::help() {
qDebug() << "help";
try
{
qDebug() << "here";
QmlDocument *qml = QmlDocument::create("asset:///Help.qml").parent(this);
// Create root object for the UI
// AbstractPane *root = qml->createRootObject();
Page *new_Page = qml->createRootObject();
// AbstractPane *oldScene = Application::instance()->scene();
// myNavi = oldScene->findChild("guestMenuNavigation");
myNavi2 = dynamic_cast(root);
// myNavi2 = root->findChild("guestMenuNavigation");
if (myNavi2){
myNavi2->push(new_Page);
Application::instance()->setScene(myNavi2);
}else{
qDebug() << "Unable find NavigationPane";
}
QNetworkAccessManager* netManager = new QNetworkAccessManager(this);
qDebug() << "here1";
const QUrl url("http://demo.netvariant.com/alkhaliji/mobile/data/categories.json");
QNetworkRequest request(url);
QNetworkReply* reply = netManager->get(request);
bool ok = connect(reply, SIGNAL(finished()), this, SLOT(onReplyFinished()));
Q_ASSERT(ok);
Q_UNUSED(ok);
}
catch(...)
{
}
}
void ApplicationUI::onReplyFinished()
{
qDebug() << "here2";
QNetworkReply* reply = qobject_cast(sender());
QString response;
if (reply) {
if (reply->error() == QNetworkReply::NoError) {
const int available = reply->bytesAvailable();
if (available > 0) {
const QByteArray data(reply->readAll());
// QVariant jsonva(QString(data)); //= Json::parse(QString(data), true);
// JsonDataAccess json = JsonDataAccess::loadFromBuffer(QString(data));
JsonDataAccess jda;
QVariant jsonva = jda.loadFromBuffer(QString(data));
//QVariantList list = jsonva.toList;
QVariant list = jsonva;
emit buildList(list);
qDebug() << "here3";
}
}
reply->deleteLater();
}
}
void ApplicationUI::buildList(QVariant list) {
qDebug() << "here4";
bb::cascades::QVariantListDataModel *listModel =
new QVariantListDataModel();
ListView* custList = root->findChild("customList");
if (custList != NULL) {
QVariantMap map;
qDebug() << "here5";
qDebug() << "unknown state";
QVariantMap childJsonv1a = list.toMap();
QVariantMap childJsonva2 = childJsonv1a["DATA"].toMap();
QVariant childJsonva = childJsonva2["categories"];
QVariantList childList = childJsonva.toList();
for (QList::iterator it = childList.begin();
it != childList.end(); it++) {
qDebug() << "here6";
map = it->toMap();
// map["negativeBalance"] = map.value("availableBalance").toString().startsWith("-");
listModel->append(map);
}
ActivityIndicator *mActivityIndicator = root->findChild<
ActivityIndicator*>("activityIndicator");
mActivityIndicator->stop();
qDebug() << "here7";
custList->setDataModel(listModel);
}
}
Help.QML
import bb.cascades 1.0
Page {
Container {
Container {
preferredWidth: Infinity
background: style.black
TopBar {
id: bar
layoutProperties: StackLayoutProperties {
spaceQuota: -1
}
}
layoutProperties: StackLayoutProperties {
spaceQuota: -1
}
}
NetworkActivity {
id: progressIndicator
horizontalAlignment: HorizontalAlignment.Fill
verticalAlignment: VerticalAlignment.Fill
}
Container {
topPadding: 20
ListView {
objectName: "customList"
id: customList
listItemComponents: [
ListItemComponent {
Container {
id: itemRoot
background: ListItem.selected ? Color.Transparent : Color.Transparent
Container {
leftPadding: 30
topPadding: 10
rightPadding: 10
bottomPadding: 10
layout: StackLayout {
orientation: LayoutOrientation.LeftToRight
}
Container {
layout: StackLayout {
orientation: LayoutOrientation.TopToBottom
}
layoutProperties: StackLayoutProperties {
spaceQuota: 1
}
Label {
text: ListItemData.label
textStyle.base: SystemDefaults.TextStyles.TitleText
textStyle.color: Color.create("#ff333333")
}
}
Container {
verticalAlignment: VerticalAlignment.Center
horizontalAlignment: HorizontalAlignment.Right
layout: StackLayout {
orientation: LayoutOrientation.LeftToRight
}
ImageView {
imageSource: "asset:///images/ic_right_arrow.png"
}
}
}
Container {
background: Color.create("#ffE0E0E0")
preferredHeight: 1
Divider {
maxHeight: 1
minHeight: 1
}
}
}
}
]
onTriggered: {
}
}
}
}
attachedObjects: [
Style {
id: style
}
]
}
the solution is page var = help.createObject ();
guestMenuNavigation.push (page);
using this instead of using c++ to push and pop. The question, I have no qnetworkmanager of work by caching... How avoid caching?
Tags: BlackBerry Developers
Similar Questions
-
Navigation pane Win7: inactive favorite area
- The area of FAVORITES in the navigation pane is not active. When I try to insert files or folders in the field, nothing happens. It does not work using drag and drop or by using the manual method ('add to Favorites' Favorites'). Using drag-and - déposer gives a red cirkel.
What can be done to activate the FAVORITES area?- I use Windows 7 Ultimate UK on a laptop Toshiba R500.
- The file system is audited by the auditor of the filesystem (no problem found)
Please repost your question in the Forums Windows7: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How can I get Vista navigation pane to only work for a specific folder view?
I am running Windows Vista classic folders. Significant irritation is that I want to have the navigation pane enabled for the _only_ in my computer/Windows Explorer folder. I don't want that it activated for other folders with groups of icons for programs.
But I find that when I turn it on for the first folder, it becomes activated for all. On the other hand, if I turn it off for a program icon folder, it is disabled for all files, including the Windows Explorer.
So, how to customize the navigation pane to make it work for a folder specific _only_?
The other models are for music or photos or videos or Documents (and I can't remember the fifth). They show the different columns and present different data sorted differently. I don't think they will solve your problem.
Some general information here is on models and how to set any records that might be of interest to you (but will not solve your problem, I think):
Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html. Default behavior is to select the model based on the first type of file placed in the folder (you must choose something). Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.
It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.
Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html. This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.
Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)
I hope this helps in your situation.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
When you use a left-hand Navigation pane, if there is enough of folders in the navigation pane as you have a vertical scroll bar, if you click on a folder with the mouse (to see supported in the right pane), and then expand the folder (either by clicking on the symbol + or with the arrow key) , then the left pane automatically scrolls upward as far as possible such as the folder you expanded is yet in sight at the bottom of the pane. This command deletes the folder under the mouse, where it should stay.
This is certainly a bug, as it only happens the first time you try to extend a record of the way. After having done it once, you can scroll the navigation (left) pane so that the file in question is back in the middle of the pane, and it will expand and contract as expected, remaining under the mouse.
Because many people seem interested in this question, I'll post some info about my recent contact with Microsoft about this issue.
It seems that everywhere where this issue has been spoken, all someone would get to a Microsoft employee was a response to "Thank you for your comments" mat. Never the validity of the issue has been discussed or even acknowledged. I decided to write an e-mail to the responsible man, Steve Ballmer, clearly the problem with links to a procedure step by step problem, this discussion and report bug with 220 votes (at the time). I realized that Steve would never read himself, but I thought that his email should get automatically transferred to a person who can actually read.Two days later I received an email from a specialist in defense of Microsoft saying a "case of grace" was created and the escalation of Windows team should get in touch with me. The next day, an engineer of the climbing sent ask when would be the right time to talk about issues on the phone. So it would be quite clear with what I was talking about, I've recorded a screencast walking through that was precisely the problem.Edit: I made a video more condensed showing the "record jump bug", see here.This has resulted in our discussions:1. engineers are aware of this problem.2. they may, or may not provide a fix for it.Nothing revolutionary, but it's a little more push in the right direction. In my opinion, post in this thread on the problem has practically no value. I suggest you:1 vote upward and commenting on the bug here:He said that the site is being monitored by the dev team.2. writing intelligent and without rudeness complaints that mention how the bug affects negatively your workflow file management every day. Send these to the top of the food chain of Microsoft until you get an answer. You are a paying customer and you deserve to be heard.I'm tired of dealing with him, so now use XYplorer when you perform heavy file management. It stings to have to pay for a decent file manager, but that's life. If this question bothers you at all, please comment and vote on the bugand write an email.13/09/11 PATCH: Bug is still present in Windows 8 Developer Preview, see here.01/30/12 UPDATE: Finally, we have a public recognition that this is actually a bug that needs to be addressed, and it will be apparently fixed in Windows 8 beta coming. It's good news, but I know I'll use Win7 for at least a year or two, as will be much, much more. We deserve a patch for this problem in Win7. Until that happens, keep Microsoft listening to this topic.FINAL THOUGHTS: It is a real bug with 645! votes on their feedback page, however MS didn't intend to fix for Windows 7 users. The bug is fixed in Windows 8, which means nothing to many of us who do not intend to upgrade. If this bug really gets under the skin, I suggest to install the classic interface, which has been recommended several times in this thread. You can choose to install only the feature "Classic Explorer" which corrects this bug among others and even remember the old UI for copy of file which is so nice to have in return. I used it for many months now without worries.In addition, for those of you who think that they find a solution to this problem by changing just a few parameters options somewhere... Thank you for your desire to help each of us, but you do not have the same problem and please do not post here your 'solution '. If you read some of the 29 pages of this thread, you will see that all the imaginable solutions has been suggested. There is a bug in the browser itself. If you are using Windows 7 and plan to continue using it, your options are 1) use the classic interface, or 2) use a third-party files, such as XYplorermanagement tool. If you stumble across this thread because you noticed this bug, please vote for the bugand make 1 or 2. -
How can I change the network address of my Time Machine drive?
Hi people,
This is my second question in 12 hours. Thanks to help I received here, I abandoned my doomed attempt to use my old AirPort Extreme and a USB key for Time Machine backups.
I've used my ReadyNAS for Time Machine backups, but it has never been reliable. I think I have tracked the question and I would like to try again. However, Time Machine remembers the old network address for the ReadyNAS unit (smb://NAS_TimeMachine.local/ReadyNAS) and does not 'see' the same unit at current address (afp://[email protected]/NASTimeMachine). You could collect that networking is not something I understand.
I think that this can be also responsible for the boring 'There was a problem... "messages that I receive at startup telling me the drive could not be mounted.
Is there a way to force the time Machine to forget the old address and 'see' a new?
See you soon,.
Grant
(PS I have also posted this question on the legacy of networking community, but I think it's a better place for this)
Click the 'clock' Time machine at the top of the screen of the Mac
Click Open Time Machine Preferences
Click select drive
Click on a disc that appears under the heading of backup discs , so that it appears highlighted
Click remove disk
Do the same for all the other disks that may appear under the heading of backup discs
Turn off and restart the AirPort Extreme
Restart the Mac.
Click the 'clock' Time machine at the top of the screen
Click Open Time Machine Preferences
Click select drives
Under the heading of available records , click a disk that you want to use to highlight the disk
Click use the disk
Close the windows
Wait a few minutes to see if a backup will start. Otherwise, click the "clock" Time machine at the top of the screen, then click on NTI Backup Now
Report on the results
-
Acquiring network address number
One of my users has a HP Pavilion notebook dv6000, XP Media Center Edition, SP3, MS updates to date. I cleaned the system of viruses, malware, spyware, adware are about 2 weeks and everything worked great - fast and efficient.
the problem is:
Users used the home laptop to connect to internet through their company of cable using DHCP, and the laptop had been works correctly after I had cleaned up two weeks ago. the user he brought him back to the office and said that it does not connect to the internet. I plugged the laptop in the network of companies and of course, it does not connect to the network. After running all software malware/virus/spyware/adware to see if something prevented the connection, and they came up with zippo.
because the laptop is set up for DHCP I thought I'll try static IP and it worked. I was able to connect to the internet, surfing etc. I went back to DHCP and still get to acquire network address and does not connect to the internet.Any ideas as to why it does not connect via DHCP. All my computers at the office work properly on DHCP. It's just the laptop which is seen the question... in our office and his home.
some added info:
I was told that his son installed Skype on the laptop after that I had cleaned the computer a couple of weeks. It is the only software that has been installed on the laptop on but the laptop was working fine, after that he installed Skype. Just for ha - ha's, I uninstalled Skype and usefulness of the tool bar to see if the connection to the internet would work with DHCP, but it has no effect.There is a wireless adapter to the laptop I have turn off and tried to get on the internet using DHCP, no luck.
First of all, make sure that your DHCP Service is running:
Start-> Run-> "services.msc".
Then, look for the line "DHCP Client" and ensure that its status is "started" and Startup Type is "automatic". Double-click it to change.
Second, make sure that there is no firewall blocking port 67 or 68 for DHCP.
Thirdly, try to reset your IP stack:
"How to reset the Protocol Internet (TCP/IP)"
http://support.Microsoft.com/kb/299357 >Finally, try one of the following repair programs:
LSPFix:
http://www.cexx.org/LSPFix.htm >
WinsockxpFix:
http://www.SnapFiles.com/get/winsockxpfix.html >Hope this helps,
JW -
Acquisition of problem of network address
The OS is XP (SP-3). Trying to set up a wireless laptop - it works very well if connected via ethernet. We have another laptop which works without problems and logged before several other laptops without problem - so suspects don't not the router.
-Device Manager show (RT2500 Ralink) wireless adapter to work properly
-WZC is enabled
-with active DHCP, the message is cycling between "absorbing the network address" and "not connected".
-IPconfig shows the 0.0.0.0 IP address
-Run IPconfig / release and / renew gave the message "no operation can be performed on the connectionwhile wireless there media disconnected." Also ' an error occurred during the renovation - the DHCP client obtained an address that is already in use.
-Enter the IP address manually produces (no active DHCP) a different effect. The message now cycles between 'connected' and not connected ' about every 3 seconds. IPconfig shows now the manually enterd IP address details. I tried several different numbers at the end of the address to ensure no conflict with other addresses.
-repair of rand without success
-restarted the router several times
-maximum strength of the wireless signal is available.
-not scanned with malwarebytes and tren micro - no problems.
-There are two installed versions of XP. Original (very slow) and recently reinstalled (works perfectly). The same behavior occurs in both versions of the operating system running.
Now, I can't find any other ideas of previous discussions in MS Answers. Can someone suggest a solution.
Hello
Don't worry that WARNING connected to the router, in this context the 'server' is your router. Simply enter your username and password and click OK.
If a USB adapter has the same problem it eliminates pilots as something to worry about.
If it works well with the router of your daughter, then he must either be the router settings or router failure.
Do the other troubleshooting and let me know what happens.
Disable the 3rd part software admin wireless and just use Zero Windows wireless. It is easier for me because I have this knowledge. There are too many other utilities of party 3rd to give me specific instructions for them.
Tricky
-
I have a HP ZV5000 laptop, who has recently suffered a hard drive crash. I replaced the drive reinstalled the operating system and it is running Windows XP Home Professional with Service Pack 3 installed.
When you attempt to connect to a wireless network, it finds all those that are generally available, but won't connect.
The properties indicates that the laptop uses "Broadcom 802. "11b / g WLAN. (Broadcom website isn't much help. The site seems to be mostly press releases).
I am told that it worked (I can't confirm this, as the player crashed when I got it).
Any suggestions? If there is any other information necessary to solve this, please let me know and I'll be more than happy to provide.
Thanks in advance!
How do you reinstall Windows?
If you use a Microsoft Windows XP installation CD, you must install all of the drivers as well. If you have reinstalled using any method HP supplies to 'restore factory State' you will have already installed the drivers.
If you can get to the Internet by connecting to the laptop using an Ethernet cable, you can go HERE and click the button "Scan Now" to make sure that you have all the correct drivers.
However, because you can see the available wireless networks, it seems that you have at least a certain driver installed for your wireless network card.
The usual reason that a wireless adapter cannot acquire a network address is the router's security settings are not allowing the connection.
The best way to deal with misconfigured security settings is to remove the 'profile' currently registered and try to connect again.
Open network connections (start > run > ncpa.cpl > OK)
Right-click on the icon for your wireless adapter and select Properties
Click the Wireless Networks (see screenshot)
If the "Use Windows to configure my wireless network" box is NOT checked, you use a third-party utility to configure the adapter and need to read its User Guide to determine how to remove the 'profile' to connect to your router.
Assuming that the box is checked, find SSID (network name) router in the list of "Preferred networks" and click 'delete '.
OK your way out
Find your network in the list of available networks, and then click 'connect '. Make sure you enter the password correctly.If this does not work, the next step would be to connect to the router by an Ethernet cable, temporarily remove all security settings that are configured on the router, remove the "My network places" configuration as above and try to connect again.
If you need help to get to and the configuration of the router, please provide the make, model and hardware version, as appropriate (check the label).
-
Is the network address in the identity of A class society I have contract with?
Is the network address in the identity of A class society I have contract with?
Hi stuckfree,
You want to check the following items for related information.
-
cannot acquire network address. The error display: 12007 on Windows XP
Cannot acquire network address, showing the error 12007.
Running system is Windows XP. HELP PLEASE.
Hello
-For how long have you had the problem?
-Did you change on your computer before the show?Follow these steps and check if they help.
Step 1:
a. Click Start, click Run and type 'cmd '.
b. go to the command prompt and type: "ipconfig/flushdns". And then click OK.
c. then type ' ipconfig / renew ' and press OK.
d. then type "netsh int ip reset resetlog.txt" and click OK.
e. restart your system and check.Step 2:
Reset the TCP/IP settings and check if that helps.
-
Acquisition of error after working on the virus cleaning network address.
OK, so these past few months Ive had a problem with a virus of hdd of thugs. Ive been trying to remove the virus completely for a while now, but this turns out to be more difficult than expected. Ive ran some tests antivirus and anti malware which have detected a few things, but still has not completely removed the propblem. I don't know anything about computers that makes it a little more difficult for me.
Ive been looking through a few threads here and I think I could be close to having this problem. The problem im having right now, this is when connecting to the internet I'm stuck on acquiring network address. Now ive seen someone mention that this could be down to the DHCP Client, now as I said I don't know much about computers or what this customer but when I try to next turn to the I get "error 1075: the dependency service does not exist or has been marked for deletion." again once I'm not sure what that means.Ive tried to use AVG 2012, MBAM, unhide.exe, rkill winsockxpfix, but to no avail... Anyone got any ideas?Thank youDaveIt's time to start again and reformat/reinstall Windows.
-
My computer is constantly acquiring network address for wired connections and wireless.
my computer is constantly acquiring network address
my computer is constantly acquiring network address wired and wireless. Note my Dell inspiron B130, Windows xp 32-bit windows 8. also under the management of the network, the details are 0.0.0.0 IP address 0.0.0.0 assigned by dhcp and active ipv6 subnet mask. Thank youHello
1. what exactly is the problem?
2. are you able to go online?
3. have you made changes on the computer before this problem?The following articles can be useful if you are having a problem with internet connectivity.
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
Original title: cannot establish a network connection
Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?
Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:Diagnosis of IP Configuration
Invalid IP address
Info
Zero (0.0.0.0) detected IP address
action
Auto repair: renew the IP address
action
Release the current IP address...
action
Successfully published the current IP address
action
Renew the IP address...
error
Error to renew the IP address: the semaphore timeout period has expired.
Info
AutoNet address detected: 169.254.225.103
action
Auto repair: reset the network connection
action
Disabling the network card
action
Activation of the card network
Info
Successfully activated network adapter
Info
Zero (0.0.0.0) detected IP address
action
Repair Manual: Reboot modem
Info
AutoNet address detected: 169.254.225.103
action
Auto repair: renew the IP address
action
Release the current IP address...
action
Successfully published the current IP address
action
Renew the IP address...
error
Error to renew the IP address: the semaphore timeout period has expired.
Info
AutoNet address detected: 169.254.225.103
Info
Redirect the user to support call
WinSock status
Info
All base service provider entries are present in the Winsock Catalog.
Info
Winsock Service providers strings are valid.
Info
Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
Info
Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
Info
Entry provider RSVP UDP Service Provider managed the loopback communication test.
Info
Entry provider RSVP TCP Service Provider passed the loopback communication test.
Info
Connectivity is valid for all Winsock service providers.
Diagnosis of network adapter
Network location detection
Info
Using the Internet connection at home
Identification of network adapter
Info
Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
Info
Ethernet connection selected
State of the network adapter
Info
The network connection status: connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity
warn
FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
warn
HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
warn
HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
warn
HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
warn
FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
warn
HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
error
Could not make an HTTP connection.
error
Could not make an HTTPS connection.
error
Could not make an FTP connection.
I found the problem (s), even if I am always left with a few questions.
During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.
The solution:
(1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.
(2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.
-
Acer Aspire 4736 XP acquiring Internet connection problem
I have a laptop Acer Aspire 4736 and he was not able to connect to the internet, we have at home for almost 2 days now. I have Windows XP 32-bit. It displays 'Acquiring Network Address' but never connected to the internet. He never had this kind of problem before. I asked the ISP, technical support, and my other computer could connect to the internet. Only my Acer Aspire 4736 unable to connect to the internet. I wanted to have my acer continue good so I can give it to my mother.Acer Aspire 4736 XP acquiring Internet connection problem
I have a laptop Acer Aspire 4736 and he was not able to connect to the internet, we have at home for almost 2 days now. I have Windows XP 32-bit. It displays 'Acquiring Network Address' but never connected to the internet. He never had this kind of problem before. I asked the ISP, technical support, and my other computer could connect to the internet. Only my Acer Aspire 4736 unable to connect to the internet. I wanted to have my acer continue good so I can give it to my mother.There seems to be a problem with cell phones and wireless encryption type I gives some links to solve this problem, because it's my job to do in my company so please follow the links
- http://www.technology-HOWTO.com/2011/08/how-to-fix-Windows-can-not-configure.html
- http://www.technology-HOWTO.com/2011/08/Windows-is-unable-to-connect-to-network.html
- to update the wireless drivers, click here to find out how
- go to services.msc and stop and restart the wireless zero configuration/wlan auto configuration
- If nothing works then change the encryption type, click here to find out how
-
problem network address acquisitionI can't access to our private internet connection... I get error messages like acquiring network address AND validation of identity no matter how long I wait nothing happens... Please help me.
create a new internet connection or reset TCP/IP socket
Maybe you are looking for
-
I get an error loading online in firefox during the loading of webcams, chrome and IE ok
Vista Windows
-
Satellite L300D-13s - why WLan appear and disappear
I have wireless networks.I can connect to that appear sometimes and sometimes disappear. If I want to connect to it that I have to go somewhere else.Why wireless sometimes appear and disappear?
-
Equium A100 - 337 PSAAQE - abandoned?
Hello I'm a little worried. I bought this laptop just 7 days ago, and when we look around the Toshiba site for updates etc, I discovered that A1OO-337 is abandoned.Anyone can shed some light on this? I'm not really happy that such a new (old) laptop
-
It is possible to activate the "wake on USB" on a Satellite C870-142?
It is possible to activate the "wake on USB" on a C870-142, specifically the USB 3.0 port? In Device Manager the USB 2.0 root hub properties have the "allow this device to wake the computer" greyed out, while the properties of USB 3.0 root hub is not
-
HP Pavilion P-277ND: wallpaper for laptop HP disappeared
Hi all I just bought a new notbook (HP Pavillion P-277ND). When I used it for the first time, I got the question (Microsoft) if I wanted to use the settings/configuration (I forgot the exact word) of my desktop pc. I chose 'yes '. Now, the beautiful