NB10 satellite will not start
I was watching a movie on my USB with my Toshiba Satellite NB10, when all of a sudden my screen went white,
I pressed the Start button & it showed onscreen Toshiba but would not start.
What is the problem, I need help.
Thank you!
You are able to access the BIOS?
First of all hold them down the power button 5-10 sec to turn off the laptop.
Then press the button again, then F2 button to access the BIOS.
If possible, please check if the HARD drive is on the first page of the BIOS... it must be demonstrated with some details like drive HARD size / name...
Your comments would be appreciated.
Tags: Toshiba
Similar Questions
-
L50 - B satellite will not start when the battery is completely discharged
Hello
My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.
My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?
Thanks for responding... I hope well :-)
Toshiba L50 - B
Windows 8.1
Any standard/original setting since I only acquired this laptop a month ago.The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.
Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problemSo in the worst case, the laptop must be checked by authorized service provider.
-
L50-A-19N satellite will not start in the BIOS
Hello
I have a problem with my laptop.
I have installed 8.1 and fedora 20 windows.I was in fedora, when I decided to restart Windows.
Instead of grub, I saw message with the error and my notebook has stopped booting.I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.
It will not start any further.
I decided to get my system, but when I press F2 or F12, nothing happens.
I can't get into the BIOS!Please, help me to solve it.
Somehow, this seems really strange
I m wondering why you are unable to access the BIOSWhat you can try to do is, remove the laptop HARD drive and switch on and press F2.
From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m
However, your comments would be greatly appreciated
-
L775-11N satellite will not start
Hello
I bought a L775 almost a year ago, but today it has stopped booting. It freezes at the screen of the BIOS (Toshiba logo).
No HDD LED activity, but all the others are fine.I think that the HARD drive is defective, as I traded with my portable Linux and it works.
However, (a Seagate Momentus XT ST95005620AS) HARD drive works on another computer and even on Linux with the Toshiba (on an external HARD drive enclosure). He has some bad sectors (INTELLIGENT default), but it works as it should.
I tried to clean the CMOS memory, wipe the HARD drive (using GParted), but nothing.
Any ideas?
I think it fails because of the CHIP, as the BIOS will not start on this HARD drive because of the errors, but I'm not sure. I tried to update the BIOS (I think that I've upgraded to 1.90 but there is a 2.0 release), but looks like it is a Windows software only.
Thanks for your replies
EDIT: I can boot the disk when it is inside a USB enclosure.
Hello
I don t think that this question is related to the failure of HARD drive.
Even if the HARD drive is faulty, the laptop must pass the POST (power self test) properly but it doesn t it freezes to the Toshiba start screen and this means that the POST has not been passedI think you should check the RAM. A faulty RAM can cause this kind of problem
Otherwise, it could be a serious problem with the motherboard. -
C satellite will not start - only toshiba logo appears
My laptop is only 1 week and will not start.
All I get is the toshiba logo and the screen becomes a pale bluish color.Any ideas?
What is your laptop model?
You are able to access the BIOS?
Turn on the unit button and press F2 to enter the BIOS.
The BIOS screen is visible?Another idea: the laptop turns on, press the F12 key.
Usually, you should see a start menu. Here choose the last option called HARD drive recovery.
This option allows you to recover the computer laptop back to factory settings. -
My C50-A-1DV Satellite will not start
Hello
Yesterday my C50 Satellite would not start. When turned on, it shows the Toshiba logo and then the little circles just keep them.
I booted into recovery mode and ran chkdsk, but there are no errors on the disc.
When I restarted, then she says the following:
Preparation auto repair
Diagnose your PC
Check disk for errors
Auto repair attemptThen at the stge small circles just continue.
I started in safe mode and activated the boot record.
Attached is the NTBTLOG file
Thank you very much
BigD
Turning off the laptop
Then press the power button and immediately after that, press the F12 button
Then you should see a screen similar to this one:Then I recommend you to choose the option to drive HARD recovery... The last option in this menu.
This would start the HDD recovery procedure and would restore the laptop back to factory settings...More details here:
http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm -
4070CDT satellite will not start up - BSOD appears
I have an old Toshiba Satellite 4070CDT.
After you have filled the password and of meadows, enter only a blue screen is visible, and nothing else works.
Start in "Safe Mode" is not an option, it will also not work.Anyone have an idea what is wrong?
Hello
The Toshiba start screen appears and makes the laptop going on this?
If this isn't the case, then there could be something wrong with the hardware.
It seems that if your device fails to its POST (Power On Self Test).
In this case, the service agent must check the machine.But first, you should check if the alternative is possible.
You plug in external devices to your laptop? If so, I would recommend disconnecting every 3rd external device.
If the laptop does not start successfully, try to recover with the recovery CD Toshiba delivered. -
L50 satellite will not start up - request password HARD drive
Hello
I hope someone can help me
I have a laptop Toshiba Satellite L50 and when I start it, it says
+ no boot device please don't restart System.It is still under warranty because it was purchased only 6 months ago.
I took it back where I bought it and they told me to contact Toshiba.I'm waiting on a reminder.
I hope that someone can help you. He also asked that the HARD drive password.Where can I find this information?
Hi Kym
I guess the L50 Satellite cannot find the boot device (HARD drive), because the HARD drive was obtained with a drive password HARD and without this HARD isn't accessible disk password and the system does not start properly.
Did you set this password for HARD drive in the past?
I m request because this isn t password on new laptops. This HARD drive password can only be set by the owner of the laptopOf my knowledge if you know n t this HARD drive password, you will not be able to access the HARD disk in such a case, the HARD drive would be useless, and the data would be lost
That's why I recommend you check if someone put the HARD drive on your laptop password where you n t know the password, you will need to replace the HARD drive and reinstall the system once more.
-
A5383 S55D satellite will not start without power
Hello!
I have the Toshiba Satellite S55D A5383 laptop and I have a problem with the battery, I think.
Laptop does not start without power. What is happening since last week.
In fact, since April 2015 battery does not last as it did when I bought (may 2014).
I have'nt registered the product and I think I'm out of warranty.So, what can I do to fix this?
You'll probably just get a new battery which is what I did. Try Amazon.
-
Re: My L50-A-1 Satellite will not start
Hello world
I have a C50-A-1 Satellite and it won't start. I used my computer at work this morning on the farm and I realized that I forgot my food at home. My laptop just Runic off battery and off of himself.
I came home, put the power supply and no lights are on my laptop won't start. I can't remove the battery on this laptop, so I can't check if it works only with the power supply...
Any suggestion?
Thank you very muchHello
I recommend to use the reset (small hole) button located at the bottom of the unit.
Usually, in the case of PC freezes, do not start or has a power failure, you can stop it by pressing the power button for 10 seconds (force shutdown).Here's the full description:
[The stop switch of strength (hole) for models with one main battery fixed | http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]Feedback would be greatly appreciated.
-
Re: My laptop Satellite will not start
Hello
s Satellite series a of 4 years.
does not start when turned on, the fans run, but wont even get to the POST.
any ideas? HARD or Mo disk failure?I'm afraid of THAT BIOS is damaged.
Did you do something last days that may be responsible for this? -
My Satellite will not start after installing Vista updates
My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.
I didn't have any rescue CD or save a Vista CD with my computer
Can someone help me. Do you have ideas how to run again.
Thank you very much
ChristineHello Christine
Can you please tell us which laptop model you have?
Did you start your laptop with F8?
What happens when you click Repair option?Please give us more information.
-
Hello
I have a Satellite C55 and it does not start until it makes a noise the fan start and stop.
I tried to take the battery and the power cable holding down the power button for 20 sec.
without the .de battery low f2 and tried now press f8 but nothing works
any ideas?
@drnaushadalam
In case of hardware problems laptop, please get in touch with Toshiba authorized service provider in your country:
Here is the page that provides your information on all available worldwide FSA
http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/But before you contact the ASP check of workaround:
- Disconnect the power adapter
- Remove the battery
- Power button press and hold 30-40 long s
- Then insert the battery and reconnect the AC adapter.
- Press the power button
-
A33 satellite will not start on the hard drive even after the installation of the new system
Hello, I need help, my A33 does not start on a hard drive. It is to see the drive hard in the bios and even by operating the drive when you go to install. But as soon as it will boot to the hard drive, it is just a black screen. It is very strange that you can see the hard drive in the bios and even with a diagnostics disk. I can see, scan it and check it by starting with a diagnostic disk, but when I start the computer, it doesn't do anything.
Help please!
Stand by. Your ad is so confused. When you read can you understand what you wrote?
BIOS recognizes the HARD drive correctly, no?
When you use bootable disk for the installation of the OS is properly recognized HDD?
You can install OS using the original recovery disc or by using the Microsoft installation disc? -
P50B satellite will not start (no power on)
I have a TOSHIBA Satellite P50-B-103 with windows 8.1. I stop the machine yesterday, but today does not when I push the power button, nothing happens. I try to hold the power button / stop 30 seconds, but nothing happened.
The" "DC IN / battery indicator" led is white, when I plug in or unplug the charger without changing the status led is allways white (not flashing).
Given that I stop the machine yesterdy the "DC IN / battery indicator" is white. But I think that when I shut the machine down allways will be tour?That's happened?
what needs to be done?Same model, same problem! It seems to start, the fan works, but 5 seconds later it stop... Still no answers on this problem of toshiba?
Maybe you are looking for
-
Can't stop after the installation of El Capitan?
Can't stop my Mac 2013 after the installation of El Capitan
-
General driver pack for Satellite Pro M70 (SPM76)
Helloas the topic I said wanne know if there is a pack pilot General.the only thing I found on the site are about 50 downloads. Some are pilots, some not:(et je ne sais pas vraiment ce que j'ai besoin: (.)) Thanks in advanceThorsten Cu
-
I'm ready to buy a Apple Watch in this week... so my doubt
I'm ready to buy a Apple Watch in this week... so my doubt and fear is if Apple Watch 2 starting soon can exchange with my product? Anyone hv any idea or much knowledge about the launch d & all please help me with your valuable answers.... plz < publ
-
HP Deskjet e3520 all-in-one: HP deskjet 3520 scan now
The printer works fine but the scanner is turned on and off. He had worked and now it says "connection error computer does not." Verification is the usb cable is connected or wireless is working properly. Then try again". The printer works so shoul
-
Impossible to activate the Windows Firewall - error code 0 x 80070422
Hello This is the first time I see that the windows firewall is disabled and when I try to turn the action center it shows like below. then when I click on manual settings it shows as the second screen. I tried to install the updates from HP, but it