NB100-116 - SUPORTED BLUETOOTH?

Similar Questions

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• NB100 - Made a Bluetooth card

  It is no bluetooth inside my nb 100 module even though the box says there a. I want to buy the original and adapt.
  Can someone tell me where I can buy one?

  I have already installed a 320 GB SATA2 drive inside is no problem for me as I am a qualified engineer. I don't want a module out to ruin the looks of a good netbook. I would have made manufacturing else if I knew that the ads were wrong, but there you go. Any help would be appreciated.

  > There is no module Bluetooth inside my nb 100 although the box says he has a. I want to buy the original and adapt. Can someone tell me where I can buy one?
  According to my experience, all compatible parts could be ordered in the ASP in your country!
  This is why you should ask the technician ASP such BT module

  They should be useful

• NB100-127: Bluetooth Module does not work

  Hey all. I had an old netbook to my dad nb100 - 127 model No. PLL10e-00Y007AR. I installed a larger hard drive and also within the 2 GB of ram. Also, I installed windows 7 spinning round. During the installation of the hard disk, I noticed a place and a connector to connect an internal bluetooth module. I bought a part of the bluetooth module online no. PA3608U-1BTM.

  After that I had installed and loaded windows its not detected by windows 7. I tried looking for the bios to see if there is any possibility of Monte sound but can't find.

  If it is a defective module?
  The module might not be compatible with the motherboard?
  The feature is locked by the bios for this model was not delivered with this feature?

  Any help would be appreciated.
  Thank you

  Hello

  As far as I know only certain NB100 units where equipped with a module BT.
  You you connected the BT module internal an internal antenna?
  Was an antenna (I know it was a Brown wire for BT) available?

  As far as I know there are some BT the NB100 compatible modules:
  Example: BT-MAP-TAIYO-YUDEN part number: V000120750

  However, as far as I know the BT card should be detected during installation of BT stack.
  THEN download http://aps2.toshiba-tro.de/bluetooth/ here BT stack and install it.
  Check if the BT module would be recognized during installation.

• NB100-12 a - get work bluetooth

  IMED a nb100-12 a. I would like to connect my samsung u600 Bluetooth, but can not get the bluetooth work on the laptop. One phone works very well. I followed the instructions for the toshiba. Do I need a dongle? Is there some simple way to make it work?

  I would be grateful any advice!

  Hello

  Are you sure that you have Bluetooth on your laptop?
  If you have Bluetooth, you must enable connections wirelessly with the hardware switch of the laptop a FN + F8.

  In addition, you should maybe Bluetooth software/driver from the Toshiba Bluetooth Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  I hope I could help you a little bit because my experience with Bluetooth is not the best.
  But if you have any other questions please let us know. :)

  Welcome them

• Re: NB100-12 - How can I activate the Bluetooth?

  I just bought a NB100-12 has.

  Installation and every few hours since it starts a process "Install Bluetooth driver" that opens a dialog box that says "Please plug in the bluetooth device and click on the OK button" if I click OK the message again in a minute. If I click Cancel, the Setup program ends abnormally and then restarts a few hours later.
  I can't tell if the NB100-12 has built-in bluetooth (although the packaging says it does) and if so how to activate it. Is it a software error, or if the bluetooth device is defective. Is it possible to test the bluetooth function?

  In the Panel the Bluetooth Local COM has no entry in there. This means - he has simply not installed?

  Hello

  Make sure the WiFi switch on the laptop is put to it.
  Make sure that it s activated with FN + F8.

  If it doesn't work try using a newer version of the Bluetooth software you can find here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• Operating instructions: Bluetooth on NB100-11R

  Although not onboard chip ships bluetooth in these machines, if you plug an external USB bluetooth device then providing you install the following additional packages:
  * gnome-bluetooth
  * bluez-utils
  It works perfectly!

  This is done easily by "synaptic" or via a terminal:

  Bq. sudo apt - get install gnome-bluetooth bluez-utils
  Then outgoing/incoming log and you can
  * Find a file in file manager, right click "send to", select bluetooth and it will start scanning for phones/PDAs etc.
  * An applet appear where you can set up the bluetooth, opportunity to discover, name of receipt of file etc.
  Fun :) I hope it's useful!

  Yes, it's very useful!

  Thanks for this great post!

• Qosmio X 500-116 - must be reset to activate Bluetooth

  -indicator goes red after awhile and only is to reactivate bluetooth restart
  -He is still unable to discover/add new devices

  Windows 7 ultimate 64 bit with clean installation
  stack 7.10.04 for x 64 version

  Anyone got any info?

  Hey Buddy,

  Have you checked the Web from Toshiba website for a more recent version of Bluetooth? If this is to do this and to update or reinstall the Bluetooth software.

  In addition, I also recommend updating your BIOS you can find on the site of Toshiba, too. Before this update, close all running programs and make sure that you are logged on as administrator.
  After a successful BIOS update doesn't forget to load the BIOS default settings.

  Good luck! :)

• NB100 with Vista Restart with a Wi - Fi connection on

  Hello all, my girlfriend has recently received a Toshiba NB100, I got a copy of Windows Vista and installed on the netbook. I know, Vista is heavy and so forth, but I must say that it works perfectly and, once the BONE is adapted to not be greedy, to speed more than decent resources.

  There is a problem though, when the netbook is connected via wi - fi to our router, sometimes it suddenly reboots. It shows no BSOD or freezing applications, it just reboot. It is not related only to activation or deactivation of a Wi - fi: we had a WiFi enabled, connected via Bluetooth/UMTS to the net, and it worked well without having to restart for a week. When a WiFi connection is turned on and connected to the router it sometimes restart. It is quite strange, does anyone have a suggestion?

  Thanks and greetings

  Paolo

  Hello

  I don't know if this will help, but please enter the BIOS settings and check the entries in the advanced settings. On most laptops you'll find the Wake-up option on wireless LAN. Make sure that this option is disabled.

• NB100 Wan without wire - LED system

  To press the Fn + Wireless WAN, t he WAN SYSTEM LED is not visible. Is - this is not unusual? The
  Bluetooth sign shines red. Is it necessary that the key WAN shines green if I conect to my WiFi router?

  I think that the LED W - LAN is red. FN + F1.
  FN + ^ is bluetooth. I have the nb100 without bluetooth.

  Greetings

• Impossible to activate WiFi on Toshiba NB100 - 11G

  Hello

  I try to activate wi - fi on nb100-11 g. I activate WiFi fn - F1, and the indicator down is light with an orange color.
  But it seems that wi - fi is not enabled, even if bluetooth is enabled.

  So I try to turn on wi - fi through Control Panel, but it shows no connection made.
  The only link that is there is the connection to the local network. Thus, wi - fi, is not activate.

  How can I activate it?

  Hello

  The FN + F1 key combination allows both the WiFi and Bluetooth.
  If BT has been activated then it would mean that you have chosen the BT instead of WLan connection and that's why the WiFi network is disabled.

  Press the FN + F1 again and check if you could choose Wlan and could allow it.

• NB100 - how to adjust the brightness of the screen?

  Hi all.

  You just bought a NB100 - overall very very happy with it. Well built, good screen and very compact, etc.

  You have some questions? The brightness of the screen is controlled by the Fn + F9/F10. I love that she's set on ' to Midway ' or less - in part to preserve the battery - but also because I find max brightness is actually TOO bright for me! But the reboot of the machine always seems to start up. Is there a way around this? There may be a firmware update (my machine seems to run version 1.90 which I believe is the most recent)?

  I noticed other referring Fn + F8 discussions as a way to select Bluetooth/WiFi etc.? Mine seems to just control the setting of the fan and processor - fan speed "gray" setting gives clocked at 1.6 ghz and fan lights - while Fn + F8 activates / deactivates an icon fan 'white' - where the processor strangling up to 800/900 ish and the slows / stops (?) fan. [by the way I noticed some videos become "jerky" If you choose the lower setting]

  I'm not 100% sure what Fn key + "pipe" (to the left of the formula 1)? The Fn + F1 turns on without wireless/wifi I know - but the key of "pipe" seems to be a symbol of Wlan (or is it the key to use for Bluetooth or GPS or other)? Sorry to sound so ignorant - but the user guide does not in this detail. I'm pretty sure that the machine, I have bought - that was one handed to new/refurbished Toshiba NB100 - model PLL10E - did not all BT/GPS etc - just the basic wifi which F1 comes on and goes off.

  Last comment - and others have said - the main peaks are very difficult to see in the dark! The 'gray' color was definitely a design error! But I can live with that - either a usb light? or a few letters of stickon (white)?

  Greetings to all.

  Hi, I think the best way to adjust the brightness is in the options of the properties of the energy available in the system tray icon. I don't know about the activation of bt and wlan, it seems that bt and WiFi devices are on the same circuit power, so not adjustable. Nb100 is a good inexspansive machine :)

• NB100 - how to activate WiFi without Blutooth?

  Hi, I have XP NB100-12Z.

  My problem: how to activate WiFI withouth activation Bluetooth! With the Fn + F1 combination devices are on and turned, as the orange led is on but the manual say Wlan (unique feature) is on the combination Fn + \. With this combination, no other led appears. So is there a way to make independent WiFI and Bt?

  Thank you for your attention.

  Hello

  I m don't know how son NB100, but other laptops you could choose between WLan and BT or BT WLan together.
  Pressing the FN + F1 would allow BT and WLan functionality.

  But what happens if you press the FN + F1 again?
  Would you be able to move to a single option (WLan or BT)?

  If this is not possible and that the FN + F1 key combination would enable and disable WiFi and BT together so I doubt you could use WLan or BT separately.

• Bluetooth on Satellite L500 does not work!

  Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!

  My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.

  After that I read some post and install the drives still does not work!

  I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!

  Any tips?

  Just do so for sure:
  You have enabled your wireless switch?

• How to install the bluetooth adapter to 4.0 on my HP Pavilion p6-2304eb trust

  I tried several times to install, but after installation, PC (windows 8.1) does not recognize my card?

  message: plug the adapter

  The bluetooth adapter is a TRUST 4.0 with productnumber 18187 bluetooth adapter.

  plugged in USB 3.0.

  Trust did not provide a driver for Windows 8.1, so the issue is not with your PC or operating system. Tyr plug it into a usb 2.0 port. USB 3.0 ports are picky about the devices.

  The problem is that the bluetooth dongle has no support for Windows 8.1.  Trusted contact .

  Sorry to bear bad news. I go back the dongle and find one that suports Windows 8.1.